The convenient route to cd fragment for the synthesis of vitamin D3 relatives

The efficient degradation of $\text{1}$ to the α-methylene ketone $\text{4}$ is described. Compound $\text{4}$ was then converted to the allylic alcohol $\text{8a}$ - the precursor of vitamin D³ relatives.     

Fast formation of aromatic cations in cyclohexane observed by pulse radiolysis

The fast formation of cations of benzophenone, biphenyl, naphthalene, anthracene and phenanthrene in liquid cyclohexane was studied by nanosecond pulse radiolysis. Rate constants between 2.3 × 10¹⁰ M^?1 s^?1 (for naphthalene) and not below 2.5 × 10¹² M^?1 s^?1 (for benzophenone) were derived and compared with the corresponding rate constants for anion formation.     

Beiträge zur quantitativen Dünnschichtchromatographie. V

Zusammenfassung Eine dünnschichtchromatographische Trennung des Wismuts von einem Überschuß an Metallen der Schwefelwasserstoffgruppe wurde beschrieben. Als Laufmittel dient ein Gemisch von tert.-Butanol, Salzsäure und Wasser. Nach Absaugen der Sorptionsschicht wird das Wismut mit MDCM spektralphotometrisch bestimmt. Standardabweichung und Varianz des Verfahrens werden angegeben.

---

Summary A thin layer Chromatographic separation of the bismuth from an excess of metal ions of the hydrogen sulfide group is described. A mixture of tert. butanol, hydrochloric acid and water serves as mobile phase. After sucking off the sorption layer, the bismuth is determined spectrophotometrically with MDCM. The standard deviation and the variance of the procedure is given.

---

Résumé On décrit une séparation par Chromatographie en couche mince du bismuth de métaux en excès du groupe de l'hydrogène sulfuré. On utilise comme éluant un mélange de butanol tert., d'acide chlorhydrique et d'eau. Après aspiration de la couche de sorption, on dose par spectrophotométrie le bismuth par le MDCM. On communique l'écart-type et le coefficient de variation du procédé.

     

Untersuchungen an oxidischen Katalysatoren. XXIX. Spektroskopische und katalytische Untersuchungen an Ni2+-, Co2+-, Cr3+- und Cu2+-ausgetauschten Mordeniten

Studies on Oxide Catalysts. XXIX. Spectroscopic and Catalytic Investigations on Ni²⁺-, Co²⁺-, Cr³⁺-, and Cu²⁺-exchanged Mordenites NiNaM, CoNaM, CrNaM und CuNaM (M = Mordenite) have been characterized by UV-VIS, EPR and i.r. spectroscopy and the results were compared with the catalytic activity and the activity-time-dependence in the cracking of n-octane and with the shape selectivity in the cracking of a n-octane and isooctane mixture. Water molecules acting as ligands of the exchanged cations are able to dissociate yielding Brönsted acidity. Brönsted sites may be regarded as catalytic active centers in the cracking reaction. Unreduced transition metal cations facilitate the “coking” of the mordenite. The unreduced chromium and cobalt cations for which a position within the main channel is expected, affect the diffusion of the branched paraffin molecule thus increasing shape selectivity.     

Zur Bestimmung von β-Aminocrotonsäureester nach Migration in Lebensmittel

β-Aminocrotonic esters are of great importance as stabilizers for the production of clearly transparent food packaging of PVC. For the purpose of studying the migration into foods a thin-layer Chromatographic and a polarographic method were elaborated. The TLC method consists of the visual comparison of the intensity of the spots after treatment with Fast Blue B salt. The polarographic determination is carried out after nitrosation of the stabilizer. By the TLC method 10^?7 g of ester per spot are still detectable; the concentration which is still determinable by cathode-ray polarography is 5×10^?7 g of ester and by conventional d.c. polarography 5×10^?6g of ester per ml of final solution. After extraction with acetonitrile traces of the stabilizer which are migrated into edible oil are still determinable down to 2 ppm by the methods described.     

A hydrodynamic voltammetric study of the ferricyanide/ferrocyanide system with convective electrodes of platinum,gold, glassy carbon,carbon film,and boron carbide

Hydrodynamic voltammetry employing empirically determined mass transport coefficients is used to determine heterogeneous rate constants and transport coefficients for the ferricyanide/ferrocyanide system in 0.1 M phosphate buffer and other supporting electrolytes with turbulent tubular and rotated disk electrodes of platinum, gold, glassy carbon, carbon film, and boron carbide. Different kinetic parameters are obtained at the various electrode materials. For the platinum, gold, and boron carbide electrodes, the magnitudes of the rate parameters depend on scan direction. The nature of this hysteresis varies with the electrode material and is explained in terms of adsorbed oxide and ionic layers or other phenomena not described by simple double layer theory.     

Vernetzung und Abbau von Polyäthylenterephthalat durch Elektronenbestrahlung

Zusammenfassung PÄT-Folien wurden in Luft, Stickstoff und Vakuum bei 20 °C mit 1 MeV-Elektronen bestrahlt. Untersucht wurden Löslichkeit und Viskosität von Proben, die unmittelbar nach der Bestrahlung gelöst wurden.In allen untersuchten Fällen trat bei hohen Bestrahlungsdosen ein unlöslicher, d. h. vernetzter Anteil auf, dessen Ausbildung jedoch durch in den Proben enthaltene Feuchtigkeit verzögert werden kann. Bei niedrigen Bestrahlungsdosen bewirkt Feuchtigkeit einen Abbau des Polymeren, wie durch Viskositätsmessungen gezeigt wird.Aus den Gel-Messungen wurde derp ₀/q ₀-Wert für Bestrahlung in Luft, Stickstoff und Vakuum zu 1,05 bestimmt.Die Änderung des Gel-Anteils bei Lagerung der Proben zwischen Bestrahlung und Lösung wird diskutiert.

---

Summary Polyethyleneterephthalate samples were irradiated in air, nitrogen and vacuum at 20 °C with 1 MeV electrons. The solubility of the samples and the viscosity of the solutions were studied immediately after irradiation. At high doses an insoluble crosslinked part was always observed. Crosslinking was delayed by moisture in the samples. At low irradiation doses moisture causes chain scission as shown by viscosity measurements. The ratiop ₀/q ₀ of degradation to crosslinking in the case of irradiation in air, nitrogen and vacuum was found by gel measurements to be 1.05. The insoluble gel-part changes with increasing storage time of the samples between irradiation and solution.

---

---

Herrn Diplom-PhysikerH. Fischer sei an dieser Stelle für wertvolle Anregungen und Diskussionen besonders gedankt.     

Optimization of simulated moving bed plants with low efficient stationary phases: separation of fructose and glucose

An optimization procedure for simulated moving bed (SMB) plants with low efficient stationary phases is presented. The new aspect is that the desorbent consumption can be cut by 70% by running the plant with lower internal liquid flows and a corresponding larger switch time while the productivity is kept constant. This concept was validated by the separation of fructose and glucose in water on a calcium resin with an eight-column SMB plant. The separation can be predicted well by a true moving bed (TMB) and a simulated moving bed simulation. Adsorption isotherms were determined up to 300 kg/m3 for glucose and 500 kg/m3 for fructose from 25 to 80 degrees C. Experimental SMB runs were performed over a wide range of feed concentrations (10-350 kg/m3) and temperatures (25-80 degrees C). The strong influence of the delay volume is pointed out. For an experimental run with high feed concentration a complete set of data is presented. To reduce biological growth separation at 80 degrees C is recommended.     

Darstellung und thermische Zersetzung von Lithiumcyanuraten Eine einfache Methode zur Gewinnung von wasserfreiem Lithiumcyanat

Zusammenfassung Die Darstellung von Mono-, Di- und Tri-Lithiumcyanurat durch Umsetzung von Cyanursäure mit LiOH bzw. Li₂CO₃ in hochsiedenden Alkoholen und durch lösungsmittelfreie Festkörperreaktion wird beschrieben. Die Festkörperreaktionen werden mit Hilfe thermoanalytischer Methoden untersucht. Die Reaktion mit LiOH erfolgt in zwei Schritten und ergibt bei 400°C. Trilithium-cyanurat. Unter denselben Bedingungen wird mit Li₂CO₃ nur Dilithium-cyanurat gebildet. Die Thermolyse von Trilithium-cyanurat bei 550°C liefert in hoher Ausbeute Lithiumcyanat und stellt somit eine einfache Methode zur Darstellung dieser Verbindung in wasserfreier Form dar.

---

Formation and thermolysis of lithium cyanurates (a simple preparation of anhydrous lithium cyanate)

The formation of mono-, di- and tri-lithium cyanurate by reaction of LiOH or Li₂CO₃ with cyanuric acid has been investigated as a solid state reaction and by using high boiling alcohols as reaction medium. For investigating the solid state reactions thermoanalytical methods were used. The reaction with LiOH proceeds in two steps yielding trilithium cyanurate at 400°C. Under the same conditions only dilithium cyanurate is formed by reaction with Li₂CO₃. Lithium cyanate is obtained in high yields by thermolysis of trilithium cyanurate at 550°C. This procedure is therefore a simple method in synthesizing pure anhydrous lithium cyanate.

---

---

Mit 3 Abbildungen

---

Herrn Univ.-Prof. Dr.O. Kratky zum 70. Geburtstag gewidmet.