Ammonia-filled discharge tubes for optical emission spectrometric determination of 15N : 14N isotope ratios

A procedure is described for filling a discharge tube, permanently attached to a vacuum line, with ammonia in the pressure range 1.5–5 Torr, without any carrier gas. The ¹⁵N : ¹⁴N isotope ratio is determined from the N₂ spectrum emitted when the tube is excited by a 2450-MHz microwave source. Cooling one end of the discharge tube to —60°C enables the N₂ (1,0) bandheads at 316 nm to be used for ¹⁵N contents down to about 0.04 atom-%. Unidentified interfering bands and emission from NH, OH, H₂ and H are discussed. Samples containing 1–30 mg of nitrogen can be analysed with an accuracy and precision suitable for most soil—plant studies employing ¹⁵N as a tracer.     

Dichloroborane-dioxane: an exceptional reagent for the preparation of alkenyl- and alkylboronic acids

Terminal alkynes and alkenes were conveniently hydroborated to the corresponding alkenyl- and alkyldichloroboranes using dichloroborane-dioxane in dichloromethane. These dichloroboranes were hydrolyzed by water to the corresponding alkenyl- and alkylboronic acids in moderate to good yields. With terminal alkenes and alkynes boron was predominantly attached to terminal carbon. Alkynes gave exclusively trans-vinylboronic acids.     

A sensitive,specific method for the determination of tetraalkyllead compounds in air by gas chromatography/atomic absorption spectrometry

The development of a sensitive and specific method of determining individually the five tetraalkyllead compounds normally present in ambient air is described. The method is based on collection of the analytes on a porous polymer using a prefilter to destroy ozone and prevent decomposition of the sample during collection and storage. Two-stage thermal desorption, separation by gas chromatography and detection by modified flame atomic absorption spectrometry gives detection limits (3σ) of ca. 0.25 ng Pb m^?3 for tetramethyllead and 0.37 ng Pb m^?3 for tetraethyllead in an air sample of 80 dm³ collected over a 3–24 h period. Environmental sampling by this method in paralle with a wet chemical (iodine monochloride) method was used to validate the method. During the comparative study, higher organic lead levels were consistently found by the iodine monochloride method; it is postulated that this indicates the presence of vapour-phase tri-(or di)-alkyllead in excess of 1 ng Pb m^?3 in rural air. The versatility of the method is demonstrated by the results of atmospheric sampling at two locations, one rural and one at the kerbside in a city centre.     

Loading characteristics and chemical stability of headgroup‐functionalized poly(ethylene glycol)‐lipid ligand tethers on polypropylene capillary‐channeled polymer fibers

Polypropylene capillary‐channeled polymer fibers have been modified by adsorption of headgroup‐functionalized poly(ethylene glycol)‐lipids to generate a species‐specific stationary phase. In order to study ligand binding characteristics, a fluorescein‐labeled poly(ethylene glycol)‐lipid was used as a model system. Breakthrough curves and frontal analysis were employed to characterize the surface loading characteristics across a range of lipid concentrations and mobile phase flow rates. Efficient mass transfer and fluid transport yield a linear adsorption isotherm up to the maximum loading concentration of 3 mg/mL, at a linear velocity of 57.1 mm/s. Under these conditions, the dynamic binding capacity was found to be 1.52 mg/g of fiber support. Variation of the linear velocity from 8.6 to 57.1 mm/s showed only small changes in breakthrough volume. The maximum capacity of 1.8 mg/g is found under conditions of a load velocity of 34.2 mm/s and a concentration of 3 mg/mL lipid. Exposure of the lipid modified fibers to several challenge solvents reveals a chemically robust system, with only 50% acetonitrile and hexanes able to disrupt the lipid adsorption. The straightforward capillary‐channeled polymer fiber surface modification with headgroup‐functionalized lipids provides both a diverse yet practically robust ligand tethering system.     

A new ent-labdane eiterpenoid lactone from Andrographis paniculata

A new ent-labdane diterpenoid lactone with a new natural product was isolated from Andrographis paniculata. Their structures were elucidated on the basis of spectral evidences including 2D NMR.     

A concise total synthesis of (+)-okaramine C

The first total synthesis of (+)-okaramine C is described. Our previously described selenocyclisation-oxidative deselenation sequence was used to establish a 3a-hydroxy-pyrrolo[2,3-b]indole core, which was modified by selective epimerisation to the common pyrrolo[2,3-b]indole of the okaramines.     

Forward scattering of pulses from a rough sea surface by Fourier synthesis of parabolic equation solutions

A variable depth step implementation of the range-dependent acoustic model (RAM) is applied to the modeling of forward scattering from a rough sea surface. The sea surface is treated within RAM simply as an internal interface between a water layer and an air upper halfspace. A comparison with a numerically exact integral equation is undertaken for the scattering of single frequencies from Pierson-Moskowitz sea surfaces. The method is extended to model the variability of linear frequency modulated pulses from a series of frozen sea surfaces in a shallow water waveguide. The subsequent effect of rough boundary scattering on the replica correlation process is investigated.     

Asymmetric synthesis of pedamide using I_2-induced heterocyclization to construct the skeleton

An alternative approach to synthesize pedamide,a key building block of pederin was described.Iodine-induced asymmetric heterocyclization was used as the key step to construct the skeleton,a tetrahydropyran ring with three chiral centers.Brown's asymmetric allylation and Lewis acid-mediated allylation were investigated to introduce chains and chiral alcohols.Sharpless dihydroxylation decorated the side chain.And high optically pure target was obtained by removing the epimers formed in these reactions on c...     

Microwave-assisted one-pot synthesis of 3-substituted-3,4-dihydrocoumarins via tendem Konevenagel and Hantzsch reactions

A convenient route for the synthesis of 3,4-dihydrocoumarin derivates from salicylaldehyde derivates and 1,3-dicarbonyl compounds under solvent-free microwave irradiation conditions was described. In this way, a range of compounds was obtained in moderate to good yields in a short reaction time.