Strukturuntersuchungen an Derivaten des Nickelkomplexes Ni(ONO) (ONO2− = Dianion einer dreizähnigen Schiffschen Base)

Structure Studies on Derivatives of the Nickel Complex Ni(ONO) (ONO^2? = Dianion of a Tridentate Schiff Base) The thermodynamically stable form of the solvent free, formally tri-coordinate complex Ni(ONO) (ONO^2? = dianion of N-(2-hydroxyphenyl)-2-ethoxycarbonyl-3-ox(o-butene(1) amine(1)) as well as the mono adducts Ni(ONO)X with X = ammonia and X = diphenyl thiourea (DPT) have been characterized by X-ray structure analysis. In all cases the central atom is coordinated in a square-planar fashion, only for the adduct Ni(ONO)(DPT) a pyramidal distortion is observed which is due to the formation of hydrogen bonds. The solvent free form is a dimer [Ni(ONO)]₂, and represents one of the few examples of dinuclear nickel complexes with a planar [NO₃] coordination. The phenolic O-atoms act as bridging ligands. Due to their reduced π-donor strength the bond lengths Ni? O trans to the bridges are significantly shortened. In contrast to the analogous complex with an aliphatic bridge, “NiEIA”, both halves of the dimeric molecules are coplanar with a Ni? Ni distance of 3.29 Å.     

Cl (Pj)_ fine structure quantum yields from UV dissociation of PCl3, CCl4, CHCl3 and Cl2 in a supersonic jet

Jet-cooled phosphorus trichloride, carbon tetrachloride, chloroform and molecular chlorine are photodissociated in the UV wavelength range 235–238 nm. Chlorine atom photofragments Cl (²P_3/2) and Cl* (²P_1/2) are detected via resonance-enhanced (2+1) ionization throughout the 232–238 nm wavelength region. The relative Cl* yields, φ*=[Cl*]/([Cl]+[Cl*]), are measured for both ³⁵Cl and ³⁷Cl isotopes using the two-photon atomic transitions at 235.3 nm for Cl and 237.8 nm for Cl*. Preliminary results indicate that the Cl* yields are different for the two isotopes for some of the precursors. In addition, we obtained the two-photon oscillator strength of the Cl transition at 237.7 nm relative to the Cl* transition at 237.8 nm. The advantage of using the two-photon Cl transition at 237.7 nm for quantum yield measurements is discussed.     

Direct transformation of variational problems into Cauchy systems. I. Scalar-quadratic case

This series of papers addresses three interrelated problems: the solution of a variational minimization problem, the solution of integral equations, and the solution of an initial-valued system of integro-differential equations. It will be shown that a large class of minimization problems requires the solution of linear Fredholm integral equations. It has also been shown that the solution of a linear Fredholm integral equation is identical to the solution of a Cauchy system. In this paper, we bypass the Fredholm integral equations and show that the minimization problem directly implies a solution of a Cauchy system. This first paper in the series looks only at quadratic functionals and scalar functions.This research was sponsored by the Air Force Office of Scientific Research, Air Force Systems Command, USAF, under Grant No. AFOSR-77-3383.     

A mass spectrometric analysis of CF4/O2 plasmas: Effect of oxygen concentration and plasma power

A quadrupole mass analyzer was used to detect the neutral products extracted downstream from a CF₄/O₂ RF discharge at 80 mtorr. mtorr. Stable discharge products were investigated as a junction of plasma power, residence time, oxygen concentration, and plasma voltage standing-wave ratio. In general, as plasma power increased from 10 to 200 W, production of CO increased while the measured mole fractions of CO₂ and COF₂ stabilized. The ratio of' CO to CO, decreases! at low plasma powers as the oxygen concentration increased. ,4n increase in the relative conversion of CF₄ to oxygenated products occurred at both low plasma powers and low oxygen concentrations. Chemical mechanisms are suggested to account for these results.     

Determination and confirmation of the amnesic shellfish poisoning toxin, domoic acid, in shellfish from Scotland by liquid chromatography and mass spectrometry

During 1998 and early 1999, shellfish samples from sites in Scotland were found to contain the amnesic shellfish poisoning toxin, domoic acid (DA). Two different techniques, liquid chromatography (LC) with UV diode-array detection and LC with mass spectrometric (MS) detection, were used to detect and confirm DA in shellfish extracts. The LC/UV method was validated for routine monitoring by recovery experiments on spiked mussel and scallop tissues with a certified mussel tissue used as reference material. Crude extracts of selected samples as well as extracts cleaned with strong anion exchange (SAX) were analyzed by both LC/UV and LC/MS. Good correlation (linear regression r2 = 0.996, slope = 0.93) between the 2 methods was found for cleaned extracts. Analyses of crude extracts by LC/UV produced false-positive results in 2 crab samples, whereas LC/MS analyses gave accurate results. It was concluded that LC/UV is a valid approach for routine monitoring of DA in shellfish when cleanup is performed with a SAX cartridge to prevent false positives. A variety of shellfish species were surveyed for DA content, including Pecten maximus (king scallops), Chlamys opercularis (queen scallop), Mytilus edulis (blue mussels), Cancer pugaris (crab), and Ensis ensis (razor fish). The highest concentration of DA was 105 microg/g in Pecten maximus.     

Ethylene tetramerization: a new route to produce 1-octene in exceptionally high selectivities

Linear alpha-olefins, such as 1-hexene and 1-octene, are important comonomers in the production of linear low-density polyethylene (LLDPE). The conventional method of producing 1-hexene and 1-octene is by oligomerization of ethylene, which yields a wide spectrum of linear alpha-olefins (LAOs). While there exists several processes for producing 1-hexene via ethylene trimerization, a similar route for the selective production of 1-octene has so far been elusive. We now, for the first time, report an unprecedented ethylene tetramerization reaction that produces 1-octene in selectivities exceeding 70%, using an aluminoxane-activated chromium/((R2)2P)2NR1 catalyst system.     

Chromium(III) Hydroxide Solubility in the Aqueous K+-H+-OH?-CO2-HCO 3? -CO 32? -H2O System: A?Thermodynamic Model

Chromium(III)-carbonate reactions are expected to be important in managing high-level radioactive wastes. Extensive studies on the solubility of amorphous Cr(III) hydroxide solid in a wide range of pH (3–13) at two different fixed partial pressures of CO₂(g) (0.003 or 0.03 atm.), and as functions of K₂CO₃ concentrations (0.01 to 5.8 mol⋅kg⁻¹) in the presence of 0.01 mol⋅dm⁻³ KOH and KHCO₃ concentrations (0.001 to 0.826 mol⋅kg⁻¹) at room temperature (22±2 °C) were carried out to obtain reliable thermodynamic data for important Cr(III)-carbonate reactions. A combination of techniques (XRD, XANES, EXAFS, UV-Vis-NIR spectroscopy, thermodynamic analyses of solubility data, and quantum mechanical calculations) was used to characterize the solid and aqueous species. The Pitzer ion-interaction approach was used to interpret the solubility data. Only two aqueous species [Cr(OH)(CO₃)₂²⁻ and Cr(OH)₄CO₃³⁻] are required to explain Cr(III)-carbonate reactions in a wide range of pH, CO₂(g) partial pressures, and bicarbonate and carbonate concentrations. Calculations based on density functional theory support the existence of these species. The log ₁₀ K° values of reactions involving these species [{Cr(OH)₃(am) + 2CO₂(g)⇌Cr(OH)(CO₃)₂²⁻+2H⁺} and {Cr(OH)₃(am) + OH⁻+CO₃²⁻ ⇌Cr(OH)₄CO₃³⁻}] were found to be −(19.07±0.41) and −(4.19±0.19), respectively. No other data on any Cr(III)-carbonato complexes are available for comparisons.     

A simple cobalt catalyst system for the efficient and regioselective cyclotrimerisation of alkynes

The intermolecular cyclotrimerisation of terminal and internal alkynes can be catalysed by simple cobalt complexes such as a CoBr2(diimine) under mild reaction conditions when treated with zinc and zinc iodide with high regioselectivity in excellent yields.     

Binding H2, N2, H-, and BH3 to transition-metal sulfur sites: synthesis and properties of [RuL(PR3)(N2Me2S2)] Complexes (L=eta2-H2, H-, BH3; R=Cy, iPr)

The reactions of [Ru(N₂)(PR₃)(‘N₂Me₂S₂’)] [‘N₂Me₂S₂’=1,2‐ethanediamine‐N,N′‐dimethyl‐N,N′‐bis(2‐benzenethiolate)(2?)] [ 1 a (R=iPr), 1 b (R=Cy)] and [μ‐N₂{Ru(N₂)(PiPr₃)(‘N₂Me₂S₂’)}₂] ( 1 c ) with H₂, NaBH₄, and NBu₄BH₄, intended to reduce the N₂ ligands, led to substitution of N₂ and formation of the new complexes [Ru(H₂)(PR₃)(‘N₂Me₂S₂’)] [ 2 a (R=iPr), 2 b (R=Cy)], [Ru(BH₃)(PR₃)(‘N₂Me₂S₂’)] [ 3 a (R=iPr), 3 b (R=Cy)], and [Ru(H)(PR₃)(‘N₂Me₂S₂’)]^? [ 4 a (R=iPr), 4 b (R=Cy)]. The BH₃ and hydride complexes 3 a , 3 b , 4 a , and 4 b were obtained subsequently by rational synthesis from 1 a or 1 b and BH₃?THF or LiBEt₃H. The primary step in all reactions probably is the dissociation of N₂ from the N₂ complexes to give coordinatively unsaturated [Ru(PR₃)(‘N₂Me₂S₂’)] fragments that add H₂, BH₄^?, BH₃, or H^?. All complexes were completely characterized by elemental analysis and common spectroscopic methods. The molecular structures of [Ru(H₂)(PR₃)(‘N₂Me₂S₂’)] [ 2 a (R=iPr), 2 b (R=Cy)], [Ru(BH₃)(PiPr₃)(‘N₂Me₂S₂’)] ( 3 a ), [Li(THF)₂][Ru(H)(PiPr₃)(‘N₂Me₂S₂’)] ([Li(THF)₂]‐ 4 a ), and NBu₄[Ru(H)(PCy₃)(‘N₂Me₂S₂’)] (NBu₄‐ 4 b ) were determined by X‐ray crystal structure analysis. Measurements of the NMR relaxation time T₁ corroborated the η² bonding mode of the H₂ ligands in 2 a (T₁=35 ms) and 2 b (T₁=21 ms). The H,D coupling constants of the analogous HD complexes HD‐ 2 a (¹J(H,D)=26.0 Hz) and HD‐ 2 b (¹J(H,D)=25.9 Hz) enabled calculation of the H? D distances, which agreed with the values found by X‐ray crystal structure analysis ( 2 a : 92 pm (X‐ray) versus 98 pm (calculated), 2 b : 99 versus 98 pm). The BH₃ entities in 3 a and 3 b bind to one thiolate donor of the [Ru(PR₃)(‘N₂Me₂S₂’)] fragment and through a B‐H‐Ru bond to the Ru center. The hydride complex anions 4 a and 4 b are extremely Brønsted basic and are instantanously protonated to give the η²‐H₂ complexes 2 a and 2 b .     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.