Identification of polyimide materials using quantitative CE with UV and QTOF‐MS detection

Polyimides (PIs) are a group of widely used synthetic materials that service a variety of different purposes including microelectronics, insulating films and aerospace applications. Depending on the requirements (defined by the particular final product), the actual composition of PIs may show substantial chemical variation. To study this variation in chemical structure, CE‐MS can be employed for the determination of PI composition following chemical degradation of the polymer sample. PI is chemically decomposed to corresponding aromatic diamine and carboxylic acid components using an alkali fusion reaction. Solid polymer samples are fused in a potassium hydroxide melt yielding reaction products that are diluted in acid and can be immediately analysed by CE coupled to a Q/TOF‐MS with quantification performed using conventional UV detection. This approach involves a simple and rapid sample preparation yielding both qualitative and quantitative information regarding the chemical composition of the polymer. Application of the CE‐MS approach is shown for a range of commercially available PI and poly(amide–imide) materials and the results are used to infer the respective chemical compositions.     

Comprehensive two-dimensional liquid chromatography coupled to the ABTS radical scavenging assay: a powerful method for the analysis of phenolic antioxidants

The on-line combination of comprehensive two-dimensional liquid chromatography (LC?×?LC) with the 2,2′-azino-bis(3-ethylbenzothiazoline)-6 sulphonic acid (ABTS) radical scavenging assay was investigated as a powerful method to determine the free radical scavenging activities of individual phenolics in natural products. The combination of hydrophilic interaction chromatography (HILIC) separation according to polarity and reversed-phase liquid chromatography (RP-LC) separation according to hydrophobicity is shown to provide much higher resolving power than one-dimensional separations, which, combined with on-line ABTS detection, allows the detailed characterisation of antioxidants in complex samples. Careful optimisation of the ABTS reaction conditions was required to maintain the chromatographic separation in the antioxidant detection process. Both on-line and off-line HILIC?×?RP-LC–ABTS methods were developed, with the former offering higher throughput and the latter higher resolution. Even for the fast analyses used in the second dimension of on-line HILIC?×?RP-LC, good performance for the ABTS assay was obtained. The combination of LC?×?LC separation with an on-line radical scavenging assay increases the likelihood of identifying individual radical scavenging species compared to conventional LC–ABTS assays. The applicability of the approach was demonstrated for cocoa, red grape seed and green tea phenolics.

Validation of a coupled FE-model for the simulation of methane oxidation via thermal imaging

To simulate the processes of methane oxidation in landfill cover layers, a new computational model was created. The purpose of the model is to allow a forecast on the performance of methanotrophic activity in landfill cover layers under changing environmental conditions. Therefore, a thermodynamic consistent model based on the well-known Theory of Porous Media (TPM) combined with the mixture theory was developed, which analyzes the relevant gas productions of methane, oxygen and carbon dioxide. Diffusion, advection and conversion processes are considered as well as the energy production during methane oxidation. With the help of the thermal imaging technique a new experimental setup was developed in order to validate the coupled model in terms of the heat generation. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Microgels as drug carriers for sonopharmacology

The ultrasound-induced cleavage of covalent and non-covalent bonds to activate drugs (sonopharmacology) is a promising concept to gain control over the action of active pharmaceutical ingredients by an external trigger. Previously, linear polymer architectures bearing drug payloads were exploited for drug release by using the principles of polymer mechanochemistry. In this work, the carrier design is altered by the polymer topology to improve the ultrasound-triggered release of covalently anchored drugs from polymer scaffolds. We use microgels crosslinked by mechanoresponsive disulfides and copolymerized with Diels-Alder adducts of furylated payload molecules and acetylenedicarboxylate. Force-induced thiol formation induces a Michael-type addition liberating the payload from the microgels. The use of microgels significantly reduces sonication times compared to linear polymer chains and shields the cargo efficiently from non-triggered activation using ultrasound that produces inertial cavitation at a frequency of 20 kHz as model condition.     

Light-Sensitive Phenacyl Crosslinked Dextran Hydrogels for Controlled Delivery**

Stimuli-responsive soft materials enable controlled release of loaded drug molecules and biomolecules. Controlled release of potent chemotherapeutic or immunotherapeutic agents is crucial to reduce unwanted side effects. In an effort to develop controlled release strategies that can be triggered by using Cerenkov luminescence, we have developed polymer hydrogels that can release bovine serum albumin and immunoglobulin G by using light (254 nm–375 nm) as a trigger. We describe the synthesis and photochemical characterization of two light sensitive phenacyl bis-azide crosslinkers that are used to prepare transparent self-supporting hydrogel patches. One crosslinker was designed to optimize the overlap with the Cerenkov luminescence emission window, bearing an π-extended phenacyl core, resulting in a high quantum yield (14 %) of photocleavage when irradiated with 375 nm light. We used the extended phenacyl crosslinker for the preparation of protein-loaded dextran hydrogel patches, which showed efficient and selective dosed release of bovine serum albumin or immunoglobulin G after irradiation with 375 nm light. Cerenkov-triggered release is as yet inconclusive due to unexpected side-reactivity. Based on the high quantum yield, efficient release and large overlap with the Cerenkov window, we envision application of these photosensitive soft materials in radiation targeted drug release.     

Catalytic Activation of Imines by Chalcogen Bond Donors in a Povarov [4+2] Cycloaddition Reaction

Recently, chalcogen bonding has been investigated in more detail in organocatalysis and the scope of activated functionalities continues to increase. Herein, the activation of imines in a Povarov [4+2] cycloaddition reaction with bidentate cationic chalcogen bond donors is presented. Tellurium-based Lewis acids show superior properties compared to selenium-based catalysts and inactive sulfur-based analogues. The catalytic activity of the chalcogen bonding donors increases with weaker binding anions. Triflate, however, is not suitable due to its participation in the catalytic pathway. A solvent screening revealed a more efficient activation in less polar solvents and a pronounced effect of solvent (and catalyst) on endo : exo diastereomeric ratio. Finally, new chiral chalcogen bonding catalysts were applied but provided only racemic mixtures of the product.     

Radical Reactivity of the Biradical [⋅P(μ-NTer)2P⋅] and Isolation of a Persistent Phosphorus-Cantered Monoradical [⋅P(μ-NTer)2P-Et]

The activation of C−Br bonds in various bromoalkanes by the biradical [⋅P(μ-NTer)₂P⋅] ( 1 ) (Ter=2,6-bis-(2,4,6-trimethylphenyl)-phenyl) is reported, yielding trans-addition products of the type [Br−P(μ-NTer)₂P−R] ( 2 ), so-called 1,3-substituted cyclo-1,3-diphospha-2,4-diazanes. This addition reaction, which represents a new easy approach to asymmetrically substituted cyclo-1,3-diphospha-2,4-diazanes, was investigated mechanistically by different spectroscopic methods (NMR, EPR, IR, Raman); the results suggested a stepwise radical reaction mechanism, as evidenced by the in-situ detection of the phosphorus-centered monoradical [⋅P(μ-NTer)₂P-R].< To provide further evidence for the radical mechanism, [⋅P(μ-NTer)₂P-Et] ( 3Et ⋅) was synthesized directly by reduction of the bromoethane addition product [Br-P(μ-NTer)₂P-Et] ( 2 a ) with magnesium, resulting in the formation of the persistent phosphorus-centered monoradical [⋅P(μ-NTer)₂P-Et], which could be isolated and fully characterized, including single-crystal X-ray diffraction. Comparison of the EPR spectrum of the radical intermediate in the addition reaction with that of the synthesized new [⋅P(μ-NTer)₂P-Et] radical clearly proves the existence of radicals over the course of the reaction of biradical [⋅P(μ-NTer)₂P⋅] ( 1 ) with bromoethane. Extensive DFT and coupled cluster calculations corroborate the experimental data for a radical mechanism in the reaction of biradical [⋅P(μ-NTer)₂P⋅] with EtBr. In the field of hetero-cyclobutane-1,3-diyls, the demonstration of a stepwise radical reaction represents a new aspect and closes the gap between P-centered biradicals and P-centered monoradicals in terms of radical reactivity.     

Steplike transmission of light through a metal-dielectric multilayer structure due to an intensity-dependent sign of the effective dielectric constant

We numerically study light propagation through a specially designed nonlinear nanoscale metal-dielectric multilayer structure with a linear effective dielectric constant just below zero. The calculated dependence of the output intensity on the input intensity shows a steplike behavior. It rests upon an intensity-dependent change of the effective dielectric constant from negative (low-transmission state) to positive (high-transmission state) values, corresponding to a transition of the optical properties from metalliclike to dielectriclike. The study of the transient behavior of the structure demonstrates a switching time of around 1 ps.     

Aeolian transport of sand

The airborne transport of particles on a granular surface by the saltation mechanism is studied through numerical simulation of particles dragged by turbulent air flow. We calculate the saturated flux q_s and show that its dependence on the wind strength u_* is consistent with several empirical relations obtained from experimental measurements. We propose and explain a new relation for fluxes close to the threshold velocity u_t, namely, q_s=a(u_*-u_t)^α with α≈2. We also obtain the distortion of the velocity profile of the wind due to the drag of the particles and find a novel dynamical scaling relation. We also obtain a new expression for the dependence of the height of the saltation layer as function of the strength of the wind.     

Fermion family recurrences in the Dyson–Schwinger formalism

We study the multiple solutions of the truncated propagator Dyson–Schwinger equation for a simple fermion theory with Yukawa coupling to a scalar field. Upon increasing the coupling constant g, other parameters being fixed, more than one non-perturbative solution breaking chiral symmetry becomes possible and we find these numerically. These “recurrences” appear as a mechanism to generate different fermion generations as quanta of the same fundamental field in an interacting field theory, without assuming any composite structure. The number of recurrences or flavors is reduced to the question of the value of the Yukawa coupling, and it has no special profound significance in the standard model. The resulting mass function can have one or more nodes and the measurement that potentially detects them can be thought of as a collider-based test of the virtual dispersion relation for the charged lepton member of each family. This requires the three independent measurements of the charged lepton’s energy, three-momentum and off-shellness. We illustrate how this can be achieved for the (more difficult) case of the tau lepton. PACS 12.15.Ff; 11.30.Rd