Effects of UV-B radiation on the Patagonian Jaborosa magellanica Brisben

Treatment of Jaborosa magellanica with artificial UV-B radiation caused changes in plant growth, plant chemistry and increase DNA polymorphisms. Spectrophotometric analysis showed that UV-B radiation decreases the chlorophylls content, and increases the amount of UV-B absorbing compounds (e.g., phenylpropanoids). Other UV-induced alterations include reduction in leaf area, alterations in plant architecture, and DNA damage. Using random primers and PCR amplification procedure, a high degree of polymorphism was detected when treated plants were compared to non-irradiated plants. These biochemical changes may be interpreted as plant response to UV-B radiation stress and as an indicator of DNA damage.     

Theoretical study of p‐methacryloyl‐aminophenylarsonic acid

Conformations of p‐methacryloylaminophenylarsonic acid (p‐MAPHA) are determined through molecular mechanics and DFT/B3LYP calculations. Solvation effects are studied within the self‐consistent isodensity continuum model (SCI‐PCM). The stationary points were found to correspond to minima as verified by the analysis of vibrational frequencies in the molecule. The molecular optical absorption was obtained by using different solvent environments. The present results are in good agreement with the available experimental data. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Investigation of pyrolysis of chinese coals using thermal analysis/mass spectrometry

TA/MS (thermal analysis coupled with mass spectrometry) was applied to the pyrolysis of Chinese coals with different ranks. A total of 13 Chinese coals were investigated. The samples were deliberately chosen to represent the 13 types of Chinese coals according to the Chinese coal classification system. The experiments were carried out in an argon atmosphere with a flow rate of 150 ml min^-1. The samples were heated from 40 up to 1200°C with a constant heating rate of 10 k min^-1. The main evolved pyrolysis products were identified through the on-line recorded mass spectra. The thermal and evolution behavior was compared between the coals. The results showed a strong thermal and evaluation behavior dependence on the coal rank. Different aliphatic fragments and also some aromatic substances, which are of environmental concern (BTX, PAHs), were found to be released depending on the different types of coal. This revised version was published online in July 2006 with corrections to the Cover Date.     

Selective hydrogenation of butadiene-styrene copolymers using a Ziegler-Natta type catalyst 2. Thermal properties

Three types of butadiene-styrene copolymers, diblock, triblock and random, were partially hydrogenated in their elastomeric units in order to determine the influence of hydrogenation extent on their thermal properties. The hydrogenation reactions were carried out using a Ziegler-Natta type catalyst and the extent of hydrogenation was evaluated by FTIR spectroscopic technique. The percentage of crystallinity was determined by differential scanning calorimetry (DSC), considering the low density polyethylene (LDPE) as reference since the saturation of elastomeric units with low content of 1,2-vinyl bonds gives a structure which resembles to LDPE, thus semi-crystalline polymers were obtained. On the other hand, the glass transition temperature (T_g) for the hydrogenated and non-hydrogenated copolymers as well as their heat of fusion, were also determined by DSC. An equation to evaluate the T_g of partially hydrogenated random copolymers is proposed considering both the saturated and unsaturated fractions. The thermo-oxidative behaviour of certain hydrogenated and non-hydrogenated copolymers was evaluated by thermogravimetric analyses (TGA). The results obtained by TGA suggest that a minimum saturation level is necessary in order to improve the thermo-oxidative resistance of the polymers.     

Determination of estrogens in environmental water samples using 1,3‐dipentylimidazolium hexafluorophosphate ionic liquid as extraction solvent in dispersive liquid–liquid microextraction

In this work, the potential of a symmetric dialkyl‐substituted ionic liquid (IL), 1,3‐dipenthylimidazolium hexafluorophosphate ([PPIm][PF₆]), as extraction solvent in dispersive liquid–liquid microextraction (DLLME) has been studied for the analysis of a group of three natural (estriol, 17β‐estradiol, and 17α‐estradiol) and four synthetic (17α‐ethynylestradiol, diethylstibestrol, dienestrol, and hexestrol) estrogenic compounds as well as one mycotoxin with estrogenic activity (zearalenone) in different types of water samples (Milli‐Q, mineral, and wastewater). Separation, determination, and quantification were developed by HPLC‐DAD and a fluorescence detector (FD) connected in series. Factors influencing the IL‐DLLME procedure (sample pH, amount of IL, type and volume of disperser solvent, ionic strength, and assistance of vortex agitation) were investigated and optimized by means of a step‐by‐step approach. Once the optimum extraction conditions were established (10 mL of water at pH 8, 60 mg of [PPIm][PF₆], 500 μL of ACN as disperser solvent and vortex agitation for 1 min), the calibration curves of the whole method (IL‐DLLME‐HPLC‐DAD/FD) were obtained and precision and accuracy were evaluated. It was demonstrated that the developed methodology was repeatable, accurate, and selective with limits of detection in the 0.30–0.57 μg/L and 13.8–37.1 μg/L range for FD and DAD, respectively. Relative recovery values were higher than 85% for the different types of water samples and the Student's t test demonstrated that there were not significant differences between the added and the found concentration.     

Influence of substrate temperature and N2/Ar flow ratio on the stoichiometry,structure and hardness of TaNx coatings deposited by DC reactive sputtering

The effect of substrate temperature and N2/Ar flow ratio on the stoichiometry, structure and hardness of TaN_x coatings prepared on (111) Si substrates by DC reactive sputtering was investigated. For the structural, chemical and morphological analysis, X‐ray diffraction (XRD), Auger electron scanning and atomic force microscopy were respectively used. Hardness values of thin films were determined using the work of indentation model from nanoindentation measurements. TaN stoichiometric coatings were obtained for samples deposited at room temperature. The stoichiometric TaN phase was not obtained by increasing the temperature up to 773 K, even when increasing the N₂/Ar flow ratio. Even when a saturation in nitrogen content was achieved, nitrogen vacancies are still present in those samples. For coatings prepared at 773 K and low N₂/Ar flow ratio, a phase mixture between TaN_x and cubic α‐Ta was observed, while a cubic structure δ‐TaN was formed by increasing the N₂/Ar flow ratio. A maximum in hardness and (38 GPa) was obtained for the sample deposited at 773 K and a N₂/Ar flow ratio of 0.2, which presented a δ‐TaN cubic crystalline structure and a roughness value of 1.6 nm. Copyright © 2015 John Wiley & Sons, Ltd.     

Asymmetric Synthesis of Fluorinated Isoindolinones through Palladium‐Catalyzed Carbonylative Amination of Enantioenriched Benzylic Carbamates

The asymmetric synthesis of fluorinated isoindolinones has been achieved by a palladium‐catalyzed aminocarbonylation reaction of the corresponding α‐fluoroalkyl o‐iodobenzylamines. A base‐mediated anti β‐hydride elimination process was suggested to explain the partial erosion of the optical purity observed in some cases. This mechanistic rationale enabled the minimization of this partial racemization by fine‐tuning the pK_a of the base.     

Kinetic Isotope Effect as a Tool To Investigate the Oxygen Reduction Reaction on Pt-based Electrocatalysts – Part II: Effect of Platinum Dispersion

We investigated the oxygen reduction reaction (ORR) mechanism on Pt nanoparticles (NPs) dispersed on several carbon blacks with various physicochemical properties (i. e. specific surface ranging from 80 to 900 m² g⁻¹, different graphitization degree, etc.). Using the kinetic isotope effect (KIE) along with various electrochemical characterizations, we determined that the rate determining step (RDS) of the ORR is a proton-independent step when the density of Pt NPs on the surface of the carbon support is high. Upon decrease of the density of Pt NPs on the surface, the RDS of the ORR starts involving a proton, as denoted by an increase of the KIE >1. This underlined the critical role played by the carbon support in the oxygen reduction reaction electrocatalysis by Pt supported on high surface area carbon.     

Synthesis, characterization and reactivity of tribenzylphosphine rhodium and iridium complexes

New rhodium and iridium complexes, with the formula [MCl(PBz₃)(cod)] [M = Rh (1), Ir (2)] and [M(PBz₃)₂(cod)]PF₆ [M = Rh (3), Ir (4)] (cod = 1,5-cyclooctadiene), stabilized by the tribenzylphosphine ligand (PBz₃) were synthesized and characterized by elemental analysis and spectroscopic methods. The molecular structures of 1 and 2 were determined by single-crystal X-ray diffraction. The addition of pyridine to a methanol solution of 1or 2, followed by metathetical reaction with NH₄PF₆, gave the corresponding derivatives [M(py)(PBz₃)(cod)]PF₆ [M = Rh (5), Ir (6)]. At room temperature in CHCl₃ solution, 4 converted spontaneously to the ortho-metallated complex [IrH(PBz₃)(cod){η²-P,C-(C₆H₄CH₂)PBz₂}]PF₆ (7) as a mixture of cis/trans isomers via intramolecular C-H activation of a benzylic phenyl ring. The reaction of 3 or 4 with hydrogen in coordinating solvents gave the dihydrido bis(solvento) derivative [M(H)₂(S)₂(PBz₃)₂]PF₆ (M = Rh, Ir; S = acetone, acetonitrile, THF), that transformed into the corresponding dicarbonyls [M(H)₂(CO)₂(PBz₃)₂]PF₆ by treatment with CO. Analogous cis-dihydrido complexes [M(H)₂(THF)₂(py)(PBz₃)₂]PF₆ (M = Rh, Ir) were observed by reaction of the py derivatives 5 and 6 with H₂.     

The reaction of tetralones with nitriles: a simple approach to the synthesis of new substituted benzo[h]quinazolines, benzo[f]quinazolines and dibenzo[a,i]phenanthridines

The one-pot reaction of 1-tetralone with nitriles in the presence of triflic anhydride affords in good yields 2,4-disubstituted 5,6-dihydrobenzo[h]quinazolines, which oxidation with DDQ leads to the corresponding benzo[h]quinazolines. 2-Tetralone undergoes identical process forming 1,3-disubstituted 5,6-dihydrobenzo[f]quinazolines. However, when the reaction of 2-tetralone is carried out with methylthiocyanate as nitrile, 5-methylthiotetrahydrodibenzo[a,i]phenanthridines are isolated in good yields. Easy transformations of the methylthio group offer possible access to a variety of substituted dibenzo[a,i]phenanthridines.