Rapid determination of lead, cadmium and thallium in cements using electrothermal atomic absorption spectrometry with slurry sample introduction

 A method is proposed for the determination of Pb, Cd and Tl in cements by ETAAS. The samples are suspended in a medium containing 10% v/v ethanol and 1% v/v both conc. nitric and hydrofluoric acids and are directly introduced into the electrothermal atomizer. The drying stage is performed by programming a 400 °C temperature, a ramp time of 5 s and a hold time of 30 s on the power supply to the atomizer. No ashing step is used. Atomization is carried out at 2100, 1800 and 1700 °C for Pb, Cd and Tl, respectively. For Cd determination, ammonium dihydrogen phosphate is added to the suspension medium. No modifier other than hydrofluoric acid is required for the Pb and Tl determination. It is shown that the results obtained by using direct calibration with aqueous standards for five commercial samples agree with those found by means of the standard additions method. Received: 29 March 1996/Revised: 24 May 1996/Accepted: 30 May 1996     

Role of the tautomerism of 2-azaadenine and 2-azahypoxanthine in substrate recognition by xanthine oxidase

The tautomerism of 2-azaadenine and 2-hypoxanthine has been examined in the gas phase and in aqueous solution. The tautomerism in the gas phase has been studied by means of semiempirical and ab initio quantum-mechanical computations, as well as density-functional calculations. The influence of the aqueous solvent on the relative stability between tautomers has been estimated from self-consistent reaction field calculations performed with different high-level continuum models. The results provide a detailed picture of the tautomeric preference for these purine bases. The importance of tautomerism in the substrate recognition by xanthine oxidase is discussed. Finally, the rate of oxidation of 2-azaadenine and 2- hypoxanthine by xanthine oxidase is discussed in terms of the recognition model at the enzyme active site.     

Effect of the Ethanol/BTC Ratio on the Methane Uptake of Mechanochemically Synthesized MOF-199

We report on a detailed textural analysis of mechanochemically synthesized MOF-199 including N₂ adsorption-desorption and CO₂ adsorption isotherms data at 77 K and 273 K (up to atmospheric pressure), respectively, and CH₄ adsorption data at 298 K (up to 35 bar). We used the isotherm adsorption data to determine the micropore volume of the MOF-199 structures, to establish their methane uptake capacity and to understand how these properties depended on the Ethanol/BTC ratio used during the synthesis. The maximum methane uptake capacity for our specimens was recorded at 130 v/v at 35 bars. These results open an avenue for a better understanding of alternative manufacturing processes of MOF structures for gas storage applications.     

Molecular Cage Assembly by Sn−O−Sn Bridging of Di-, Tri- and Tetranuclear Organotin Tectons: Extending the Spacing in Double Ladder Structures

Hydrolysis reactions of di- and trinuclear organotin halides yielded large novel cage compounds containing Sn−O−Sn bridges. The molecular structures of two octanuclear tetraorganodistannoxanes showing double-ladder motifs, viz., [{Me₃SiCH₂(Cl)SnCH₂YCH₂Sn(OH)CH₂SiMe₃}₂(μ-O)₂]₂ [ 1 , Y=p-(Me)₂SiC₆H₄-C₆H₄Si(Me)₂] and [{Me₃SiCH₂(I)SnCH₂YCH₂Sn(OH)CH₂SiMe₃}₂(μ-O)₂]₂ ⋅ 0.48 I₂ [ 2⋅ 0.48 I₂, Y=p-(Me)₂SiC₆H₄-C₆H₄Si(Me)₂], and the hexanuclear cage-compound 1,3,6-C₆H₃(p-C₆H₄Si(Me)₂CH₂Sn(R)₂OSn(R)₂CH₂Si(Me)₂C₆H₄-p)₃C₆H₃-1,3,6 ( 3 , R=CH₂SiMe₃) are reported. Of these, the co-crystal 2⋅ 0.48 I₂ exhibits the largest spacing of 16.7 Å reported to date for distannoxane-based double ladders. DFT calculations for the hexanuclear cage and a related octanuclear congener accompany the experimental work.     

Prediction of the behaviour of organic pollutants using cloud point extraction

A preconcentration study based on the cloud point phenomenon was carried out for a set of triazine herbicides, three of them chloro-substituted and three of them methylthio-substituted. Concentration factors and recoveries were calculated as function of the percentage of the non-ionic surfactant Triton X-114 employed. From these values, obtained from a cloud point extraction (CPE) procedure, the distribution coefficient between the Triton X-114 micelles and water, Kc, prior to CPE was calculated for each triazine and related to the corresponding octanol-water partition coefficient, Kow. In order to confirm the results obtained with the triazine herbicides, two sets of data from chemically different organic pollutants--organophosporous and chlorophenols--obtained from the literature were assessed, concluding that they display a similar behaviour to that of the triazine herbicides. This can be used to predict the CPE behaviour of other organic pollutants from their octanol-water partition coefficients. The Kc values were compared with the analyte concentration ratio in the surfactant-rich phase and aqueous phase (Ksa) with a view to obtaining a link between the analyte behaviour prior to and after cloud point extraction procedures.     

Organic-Free Interzeolite Transformation in the Absence of Common Building Units

Zeolite crystals can be used as seeds or aluminosilicate sources in syntheses to control polymorphs and/or reduce the quantity of organics used as structure-directing agents. A frequently invoked hypothesis for interzeolite transformations is that zeolites share some underlying similarity in structure, most notably in cases pertaining to organic-free syntheses. Herein, we show for the first time that ZSM-5 (MFI) can be directly obtained from USY (FAU) through an interzeolite transformation between parent–daughter structures lacking common building units in the absence of a structure-directing agent and seeds. We show that interzeolite transformation leads to a crystalline product with fewer defects. Our findings also reveal that ZSM-5 is a metastable intermediate that undergoes further transformation to mordenite (MOR) and quartz. The MFI-to-MOR transition is counter to reported trends for which transformations lead to structures with reduced molar volume. Herein, we propose mechanistic arguments that suggest the driving force for interzeolite transformation is more complex than guidelines posited in the literature.     

Comparative study of separation and determination of triazines by micellar electrokinetic capillary chromatography and nonaqueous capillary electrophoresis: application to residue analysis in natural waters

The separation and determination of a mixture of chloro- and methylthiotriazines in water samples by both micellar electrokinetic capillary chromatography (MEKC) and nonaqueous capillary zone electrophoresis (NA-CZE) were compared. The characteristics of both methods proved to be very similar in terms of separation efficiency and analysis times, but application of these methods for the analysis of triazines in natural waters, with a prior preconcentration step, revealed significant differences. A preconcentration step by solid-phase extraction (SPE) with Oasis HLB cartridges was accomplished for the determination of triazines at sub-ppb levels in drinking and river waters; when NA-CZE was used after this SPE step, electropherograms with fewer interferences and more stable baselines were obtained than when separation was carried out using MEKC. Another aspect related to the application to real samples was the lack of precision encountered upon evaluating the electrophoretic signals generated when using SPE coupled with NA-CZE. Here, we demonstrate the importance of choosing an appropriate internal standard for analyte quantification. It is recommended that a triazine belonging to the same family as that of the triazine to be determined should be used as internal standard.     

Reactivity of amino acids in nitrosation reactions and its relation to the alkylating potential of their products

Nitrosation reactions of amino acids with an -NH(2) group [namely, six alpha-amino acids (glycine, alanine, alpha-aminobutyric acid, alpha-aminoisobutyric acid, valine, and norvaline); two beta-amino acids (beta-alanine and beta-aminobutyric acid), and one gamma-amino acid (gamma-aminobutyric acid)] were studied. Nitrosation was carried out in aqueous acid media, mimicking the conditions of the stomach lumen. The rate equation was r = k(3)(exp)[amino acid][nitrite](2), with a maximum k(3)(exp) value in the 2.3-2.7 pH range. The existence of an isokinetic relationship supports the argument that all the reactions share a common mechanism. A nitrosation mechanism is proposed, and the following conclusions are drawn: (i) Nitrosation reactions of amino acids with a primary amino group in acid media occur with dinitrogen trioxide as the main nitrosating agent. The finding that the nitrosation rate is proportional to the square of the nitrite concentration suggests that the yield of nitrosation products in the stomach would increase sharply with higher nitrate/nitrite intakes. (ii) Stomach hypochlorhydria could be a potential enhancer of in vivo amino acid nitrosation. (iii) The reactivity (k(3)()(exp)) [alpha-amino acids > beta-amino acids > gamma-amino acids] is the same as that found in a previous work for the alkylating potential of lactones formed from nitrosation products of the same amino acids. This implies that the nitrosation reactions of the most common natural amino acids are the most efficient precursors of the most powerful alkylating agents. (iv) The order of magnitude (10(7)-10(8) M(-1) s(-1)) of the bimolecular rate constants of nitrosation shows that such reactions occur through an encounter process.     

To Sandwich Technetium: Highly Functionalized Bis-Arene Complexes [99mTc(η6-arene)2]+ Directly from Water and [99mTcO4]−

The labeling of (bio)molecules with metallic radionuclides such as ^99mTc demands conjugated, multidentate chelators. However, this is not always necessary since phenyl rings can directly serve as integrated, organometallic ligands. Bis-arene sandwich complexes are generally prepared by the Fischer–Hafner reaction. In extension of this, we show that [^99mTc(η⁶-C₆R₆)₂]⁺-type complexes are directly accessible from water and [^99mTcO₄]⁻, even using arenes incompatible with Fischer–Hafner conditions. To unambiguously confirm the nature of these unprecedented ^99mTc complexes, their rhenium homologous have been prepared by substituting naphthalene ligands in [Re(η⁶-C₁₀H₈)₂]⁺ with the corresponding phenyl groups. The ease with which highly stable [^99mTc(η⁶-C₆R₆)₂]⁺ complexes are formed under standard labeling conditions enables a multitude of new potential imaging agents based on commercial pharmaceuticals or lead structures.     

Application of principal component regression to luminescence data for the screening of ciprofloxacin and enrofloxacin in animal tissues

A new screening method for the analysis of enrofloxacin and ciprofloxacin in edible animal tissues is described. The method is based on the application of principal component regression to luminescence measurements after reaction of quinolones with terbium(III) in a micellar medium. The method was used, first, to discriminate between quinolone-containing or quinolone-not-containing samples (concentration below the detection limit) and, then, to quantify the sum of both analytes. Standards in a pure-water matrix, using the first three principal components, were used for the determination. RRMSE range from 4 to 10% depending on the analyte. Calibration was successfully applied to the analysis of spiked chicken and trout muscle at concentrations between 10 and 50 micrograms kg-1.