Determination of iron at ng/ml level by solid phase spectrophotometry after preconcentration on cation exchange filters

A cationic exchanger paper is used to retain analytes in solution and, after drying, to analyze directly by measuring the UV-Vis absorbance of the paper. The method was applied to determination of iron using its known 1,10-phenanthroline complex. Using 100 ml of sample the applicable concentration range was between 1.0 and 10.0 ng/ml with a detection limit of 0.2 ng/ml and a RSD around 2%. The method was applied to determination of iron total in snow, human serum and wine.     

Synthesis and photoluminescent properties of 1,1'-binaphthyl-based chiral phenylenevinylene dendrimers

New chiral, soluble binaphthyl derivatives that incorporate stilbenoid dendrons at the 6,6'-positions have been prepared. The synthesis of the new enantiopure dendrimers was performed in a convergent manner by Horner-Wadsworth-Emmons (HWE) reaction of the appropriately functionalized 1,1'-binaphthyl derivative (R)-1 and the appropriate dendrons (R)(2n)G(n)-CHO. Different electroactive units were incorporated in the peripheral positions of the dendrons in order to tune both the optical and electrochemical behavior of these systems. Fluorescence measurements on the chiral dendrimers reveal a strong emission with maxima between 409 and 508 nm depending upon the substitution pattern. Finally, the redox properties of the dendrimers were determined by cyclic voltammetry, showing the influence of the functional groups at the peripheral positions of the dendrimer on the redox behavior of these systems.     

On-line preconcentration of inorganic mercury and methylmercury in sea-water by sorbent-extraction and total mercury determination by cold vapour atomic absorption spectrometry

A comparative study of three mercury chelate forming reagents [diethyldithiocarbamate, pyrrolidin-1-yldithioformate and diphenylthiocarbazone (dithizone)] has been carried out for the preconcentration of ultratrace amounts of inorganic mercury and methylmercury in silica C(18) minicolumns as the solid sorbent. Sample flow injection in-line sorbent extraction was coupled with continuous cold vapour atomic absorption spectrometry (CVAAS) for detection. Results showed the superiority of the carbamate type reagents over the dithizone for the on-line formation and preconcentration of the corresponding mercury chelates. Using diethyldithiocarbamate (DDC) as reagent, aqueous sample volumes of 100 ml can be preconcentrated with 100% efficiency for both inorganic mercury and methylmercury. Quantitative release of the retained DDC chelates was obtained for volumes of eluent (ethanol) of 50 microl. Following the proposed procedure, detection limits of 16 ng/l. of mercury were achieved for sample volumes of 25 ml. The relative standard deviation was +/- 3.4% at 0.5 microg/l. Hg(II) levels. The method has been successfully applied to the determination of low levels of mercury in sea-water.     

On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

Direct electrochemical synthesis and characterization of copper(II), iron(II) and iron(III) complexes with 1- and 2-substituted pyridines

Summary The electrochemical oxidation of anodic metals (iron and copper) in MeCN solutions of 2-pyridinone (HOPy), 1-hydroxy-2-pyridinethione (HPT), 2-pyridinemethanethiol-1-oxide (HPMTO) or its dimer 2,2-dithiodimethyldipyridine-1,1-dioxide (PMTO)₂, gave the simple complexes Fe(OPy)₂ · H₂O, Cu(OPy)₂ · 3H₂O, Fe(PT)₂ · 3H₂O, Fe(PT)₃, Cu(PT)₂, Fe(PMTO)₂·3H₂O and Cu(PMTO)₂·H₂O, respectively. When 1,10-phenanthroline (phen) was added to the electrolytic phase, only two mixed complexes were obtained: Cu(OPy)₂phen·3H₂O and Fe(PT)₂phen·2H₂O. The possible molecular structures of the complexes were studied on the basis of their i.r. spectra and magnetic properties.     

Type-D vacuum solutions with cosmological constant

All type-D vacuum (nonnull orbit and null orbit) solutions with are exhibited in canonical coordinates. The nonnull orbit metrics with contain four families of solutions: the static Levi-Cività metrics, the nondivergingD's, the divergingD's, and the diverging and twisting solutions. The null orbit metrics subdivide into two subclasses of solutions: the divergenceless null orbitD's, and the diverging and twisting null orbit solution.     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

Pentacoordinate nickel(II) complexes double bridged by phosphate ester or phosphinate ligands: spectroscopic, structural, kinetic, and magnetic studies

The bis(phosphatediester)-bridged complexes [[Ni([12]aneN(3))(mu-O(2)P(OR)(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), 2,4,4-trimethyl-1,5,9-triazacyclododec-1-ene; R=Me (1), Bu (2), Ph (3), Ph-4-NO(2) (4); [12]aneN(3)=Me(4)[12]aneN(3), 2,4,4,9-tetramethyl-1,5,9-triazacyclododec-1-ene; R=Me (5), Bu (6), Ph (7), Ph-4-NO(2) (8)] were prepared by hydrolysis of the phosphate triester with the hydroxo complex [[Ni([12]aneN(3))(mu-OH)](2)](PF(6))(2) or by acid-base reaction of the dialkyl or diaryl phosphoric acid and the above hydroxo complex. The acid-base reaction was also used to synthesise the phosphinate-bridged complexes [[Ni([12]aneN(3))(mu-O(2)PR(2))](2)](PF(6))(2) [[12]aneN(3)=Me(3)[12]aneN(3), R=Me (9), Ph (10); [12]aneN(3)=Me(4)[12]aneN(3), R=Me (11), Ph (12)]. The molecular structures of complexes 2, 3 and 12 were established by single crystal X-ray diffraction studies. The eight-membered rings defined by the nickel atoms and the bridging ligands show distorted twist-boat, chair and boat-boat conformations in 2, 3 and 12, respectively. The experimental susceptibility data for compounds 2, 3 and 12 were fitted by least-squares methods to the analytical expression given by Ginsberg. The best fit was obtained with values of J=-0.11 cm(-1), D=-9.5 cm(-1) and g=2.20 for 2; J=-0.97 cm(-1), D=-9.3 cm(-1) and g=2.21 for 3; and J=-0.14 cm(-1), D=-11.9 cm(-1) and g=2.195 for 12. The magnetic-exchange pathways must involve the phosphate/phosphinate bridges, because these favour antiferromagnetic interactions. The observation of a higher exchange parameter for compound 3 is a consequence of a favourable disposition of the O-P-O bridges. The kinetics for the hydrolysis of TNP (tris(4-nitrophenyl)phosphate) with the dinuclear nickel(II) hydroxo complex [[Ni(Me(3)[12]aneN(3))(mu-OH)](2)](PF(6))(2) was studied by UV-visible spectroscopy. The proposed mechanism for TNP-promoted hydrolysis can be described as one-substrate/two-product, and can be fitted to a Michaelis-Menten equation.     

Water-soluble ruthenium(II) catalysts [RuCl2(eta6-arene)[P(CH2OH)3]] for isomerization of allylic alcohols and alkyne hydration

The novel water-soluble ruthenium(II) complexes [RuCl(2)(eta(6)-arene)[P(CH(2)OH)(3)]]2a-c and [RuCl(eta(6)-arene)[P(CH(2)OH)(3)](2)][Cl]3a-c have been prepared in high yields by reaction of dimers [[Ru(eta(6)-arene)(micro-Cl)Cl](2)](arene = C(6)H(6)1a, p-cymene 1b, C(6)Me(6)1c) with two or four equivalents of P(CH(2)OH)(3), respectively. Complexes 2/3a-c are active catalysts in the redox isomerization of several allylic alcohols into the corresponding saturated carbonyl compounds under water/n-heptane biphasic conditions. Among them, the neutral derivatives [RuCl(2)(eta(6)-C(6)H(6))[P(CH(2)OH)(3)]]2a and [RuCl(2)(eta(6)-p-cymene)[P(CH(2)OH)(3)]]2b show the highest activities (TOF values up to 600 h(-1); TON values up to 782). Complexes 2/3a-c also catalyze the hydration of terminal alkynes.     

Structural Study of Alkaline 1-Phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate Salts: An Example of Periodicity in Alkaline Cations

The alkaline 1-phenyl-1H-1, 2, 3, 4-tetrazole-5-thiolate salts, M[C₆H₅N₄CS] (M = Li ( 1 ), Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 )) were obtained and characterized by means of mass spectrometry (FAB⁺) and NMR (¹H; ¹³C) spectroscopy. The structures of Na ( 2 ), K ( 3 ), Rb ( 4 ) and Cs ( 5 ) compounds were determined by X-ray diffraction methods. The ligand shows a rich variety of coordination patterns with the alkaline cations. The formation of a four-membered ring MSCN in the compounds with heavier alkali cations (K, Rb and Cs) is shown. In all the cations the coordination number around it increases with the ionic radius. Compounds with Cs⁺ and Rb⁺ exhibited the formation of Cs-C and Rb-C interactions with the phenyl group.