Stereoselective syntheses of 1,4-dideoxy-1,4-imino-octitols and novel tetrahydroxyindolizidines

A new route for the preparation of four new indolizidines, (1R,2S,6S,7S,8aS)- and (1R,2S,6R,7R,8aS)-1,2,6,7-tetrahydroxyindolizidine (30 and 32) and (1S,2R,7S,8S,8aR)- and (1S,2R,7R,8R,8aR)-1,2,7,8-tetrahydroxyindolizidine (44 and 46), is reported. The synthesis is based on Knoevenagel homologation of the readily available enantiomerically pure pyrrolidin-carbaldehydes 13 and 37followed by asymmetric dihydroxylation of the subsequent alkenyl pyrrolidines and cyclization of the corresponding imino-octitols. The new indolizidines and their precursors (imino-octitols 20, 25, 26) and indolizidinones 28a and 28b have been tested for inhibitory activities toward 26 glycosidases. The enzymatic inhibition of trans-7-hydroxy-d-(-)-swainsonine (44) toward alpha-mannosidases is similar to that described for trans-7-hydroxy-l-(+)-swainsonine (11b) toward naringinase (alpha-l-rhamnosidase from Penicillium decumbens).     

Ligand adsorption on an activated carbon for the removal of chromate ions from aqueous solutions

The results presented in this work are related to the design of a guideline to develop specific properties at the surface of an activated carbon (AC). For this, two model aromatic compounds have been synthesized and their electrolytic behavior in aqueous solutions was studied by a potentiometric method. The textural characteristics of the activated carbon were determined by porosimetry methods. The nature of oxygen-carrying functions and the acid-base behavior of the AC surface were characterized by TPD and potentiometric titration methods, respectively. The adsorption and desorption equilibria of the aromatic compounds on activated carbon were measured in aqueous solutions, and the hysteresis between adsorption and desorption, which reveals irreversible adsorption, was discussed on the basis of the frontier orbital theory. HOMO and LUMO orbitals of the adsorbent and adsorbates were calculated, and irreversible adsorption was attributed to the small energy difference between HOMO and LUMO of the aromatic adsorbates and the adsorbent. Adsorption equilibria of K2CrO4 in aqueous solution on the AC alone and on the AC-aromatic ligand adsorbents, respectively, prove the efficient development of specific chemical functions at the carbon surface provided by the adsorbed aromatic compounds.     

Synthesis and characterization of trifluoromethyl fluoroformyl peroxycarbonate,CF3OC(O)OOC(O)F

The synthesis of CF(3)OC(O)OOC(O)F is accomplished by the photolysis of a mixture of (CF(3)CO)(2)O, FC(O)C(O)F, CO, and O(2) at -15 degrees C using a low-pressure mercury lamp. The new peroxide is obtained in pure form in low yield after repeated trap-to-trap condensation and is characterized by NMR, IR, Raman, and UV spectroscopy. Geometrical parameters were studied by ab initio methods [B3LYP/6-311+G(d)]. At room temperature, CF(3)OC(O)OOC(O)F is stable for many days in the liquid or gaseous state. The melting point is -87 degrees C, and the boiling point is extrapolated to 45 degrees C from the vapor pressure curve log p = 8.384 - 1715/T (p/mbar, T/K). A possible mechanism for the formation of CF(3)OC(O)OOC(O)F is discussed, and its properties are compared with those of related compounds.     

The first immobilization of pyridine-bis(oxazoline) chiral ligands

[formula: see text] A chiral pyridine-bis(oxazoline) ligand, functionalized with a vinyl group in the pyridine ring, can be polymerized with styrene and divinylbenzene to obtain supported chiral ligands. As proof of the usefulness of this supported ligands, the corresponding ruthenium complexes are catalysts for the cyclopropanation reaction of styrene with ethyl diazoacetate with up to 85% ee.     

Catalytic asymmetric addition of alkylzinc and functionalized alkylzinc reagents to ketones

We describe our full report of the catalytic asymmetric addition of simple and functionalized dialkylzinc reagents to a broad range of saturated ketones and enones. The functionalized organozinc reagents contain esters, silyl ethers, alkyl chlorides, and alkyl bromides. In general, the resulting tertiary alcohol products are isolated with high ee's. With some substrates, yields are low as a result of the formation of aldol byproducts. Most substrates undergo additions with good yields reaching as high as 91%.     

Proton induced P-H and Mo-H bond activation at the phosphide bridged dimolybdenum complexes [Mo2Cp2(mu-H)(mu-PHR)(CO)4](R = Cy, 2,4,6-C6H2R'3; R'= H, Me, tBu)

The new hydride complexes [Mo2Cp2(mu-H)(mu-PHR)(CO)4] having bulky substituents (R = 2,4,6-C(6)H2tBu3= Mes*, R = 2,4,6-C6H2Me3= Mes) have been prepared in good yield by addition of Li[PHR] to the triply bonded [Mo2Cp2(CO)4] and further protonation of the resulting anionic phosphide complex [Mo2Cp2(mu-PHR)(CO)4]-. Protonation of the Mes* compound with either [H(OEt2)2][B{3,5-C6H3(CF3)2}4] or HBF4.OEt2 gives the cationic phosphinidene complex [Mo2Cp2(mu-H)(mu-PMes*)(CO)4]+ in high yield. In contrast, protonation of the analogous hydride compounds with Mes or Cy substituents on phosphorus give the corresponding unsaturated tetracarbonyls [Mo2Cp2(mu-PHR)(CO)4]+, which are unstable at room temperature and display a cis geometry. Decomposition of the latter give the electron-precise pentacarbonyls [Mo2Cp2(mu-PHR)(mu-CO)(CO)4]+, also displaying a cis arrangement of the metal fragments. In the presence of BF4- as external anion, fluoride abstraction competes with carbonylation to yield the neutral fluorophosphide hydrides [Mo2Cp2(mu-H)(mu-PFR)(CO)4]. Similar results were obtained in the protonation reactions of the hydride compounds having a Ph substituent on phosphorus. In that case, using HCl as protonation reagent gave the chloro-complex [Mo2ClCp2(mu-PHPh)(CO)4] in good yield. The structures and dynamic behaviour of the new compounds are analyzed on the basis of solution IR and 1H, 31P, 19F and 13C NMR data as well as the X-ray studies carried out on [Mo2Cp2(mu-H)(mu-PHMes)(CO)4](cis isomer), [Mo2Cp2(mu-H)(mu-PFMes)(CO)4](trans isomer), [Mo2Cp2(mu-PHCy)(mu-CO)(CO)4](BF4) and [Mo2ClCp2(mu-PHPh)(CO)4].     

Three-dimensional quantitative structure-activity relationships of steroid aromatase inhibitors

Summary Inhibition of aromatase, a cytochrome P450 that converts androgens to estrogens, is relevant in the therapeutic control of breast cancer. We investigate this inhibition using a three-dimensional quantitative structure-activity relationship (3D QSAR) method known as Comparative Molecular Field Analysis, CoMFA [Cramer III, R.D. et al., J. Am. Chem. Soc., 110 (1988) 5959]. We analyzed the data for 50 steroid inhibitors [Numazawa, M. et al., J. Med. Chem., 37 (1994) 2198, and references cited therein] assayed against androstenedione on human placental microsomes. An initial CoMFA resulted in a three-component model for log(1/K_i), with an explained variance r² of 0.885, and a cross-validated q² of 0.673. Chemometric studies were performed using GOLPE [Baroni, M. et al., Quant. Struct.-Act. Relatsh., 12 (1993) 9]. The CoMFA/GOLPE model is discussed in terms of robustness, predictivity, explanatory power and simplicity. After randomized exclusion of 25 or 10 compounds (repeated 25 times), the q² for one component was 0.62 and 0.61, respectively, while r² was 0.674. We demonstrate that the predictive r² based on the mean activity (Y_m) of the training set is misleading, while the test set Y_m-based predictive r² index gives a more accurate estimate of external predictivity. Using CoMFA, the observed differences in aromatase inhibition among C6-substituted steroids are rationalized at the atomic level. The CoMFA fields are consistent with known, potent inhibitors of aromatase, not included in the model. When positioned in the same alignment, these compounds have distinct features that overlap with the steric and electrostatic fields obtained in the CoMFA model. The presence of two hydrophobic binding pockets near the aromatase active site is discussed: a steric bulk tolerant one, common for C4, C6-alpha and C7-alpha substitutents, and a smaller one at the C6-beta region.     

Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Prediction of peak shape as a function of retention in reversed-phase liquid chromatography

Optimisation of the resolution of multicomponent samples in HPLC is usually carried out by changing the elution conditions and considering the variation in retention of the analytes, to which a standard peak shape is assigned. However, the change in peak shape with the composition of the mobile phase can ruin the optimisation process, yielding unexpected overlaps in the experimental chromatograms for the predicted optimum, especially for complex mixtures. The possibility of modelling peak shape, in addition to peak position, is therefore attractive. A simple modified-Gaussian model with a parabolic variance, which is a function of conventional experimental parameters: retention time (tR), peak height (H0), standard deviation at the peak maximum (sigma0), and left (A) and right (B) halfwidths, is proposed. The model is a simplification of a previous equation proposed in our laboratory. Linear and parabolic relationships were found between the peak shape parameters (sigma0), A and B) and tR, with a mean relative error of 1-5% in most cases. This error was partially due to variations in peak position and shape among injections, which in some cases were above 2%. Correlations between (sigma0, A and B) and the retention time, which is easily modelled as a function of mobile phase composition, allowed a simple and reliable prediction of chromatographic peaks. A parameter that depends on the slopes of the linear relationships for A and B versus tR is also proposed to evaluate column efficiency. The modified-Gaussian model was used to describe the peaks of six diuretics of diverse acid-base behaviour and polarity, which were eluted with 15 mobile phases where the composition was varied between 30 and 50% (v/v) acetonitrile and the pH between 3 and 7.     

Kováts' coefficients for predicting polarities in silicone stationary phases and their mixtures

Summary A correlation between the retention polarity and the Kováts' coefficient has been found for a number of commercial stationary phases used in gas chromatography. The correlation has been used to predict the polarity of a few mixed stationary phase columns prepared as binary mixtures of OV-101 with OV-25, DC-550 or Carbowax 20M, and also mixtures of OV-225 with SP-2340. A linear relationship was found between polarity and mixture composition. The temperature dependence of the Kováts' coefficient was investigated and found to increase linearly with temperature, the rate of increase depending on the polarity of the stationary phase, with greater increases for more polar stationary phases.