On the use of AES data analysis to determine local enrichments of conversion coating elements at intermetallic particles on rolled Al

In this paper, the behaviour of the industrial applied Ti/Zr conversion coating (CC) pretreatment on rolled automotive aluminium samples (AA5182) is analysed. Due to its nanometre lateral and depth resolution, Auger electron spectroscopy (AES) is used to analyse the CC distribution at surface cathodic intermetallic particles. As a result of its high surface sensitivity, the AES technique is very susceptible to differences in the top contamination layer thickness. It is demonstrated that AES point measurements performed on aluminium model samples coated with 1.5 and 3 nm of Ti (oxide) layer cannot differentiate the two-layer thicknesses if a difference in the top contamination thickness is not taken into account. A data analysis methodology is introduced, based on the ratio of normalized peak areas (enrichment ratios), to eliminate the effect of the contamination layer thickness. The experimental validation of the methodology is performed on the model samples, demonstrating errors of 2% on the enrichment ratios on similar samples with different contamination layer thicknesses, while the conventional spectra quantification results in errors of 49%. The methodology is also theoretically substantiated within certain constraints. By the use of the AES methodology, an enriched Ti and Zr deposition is confirmed at the cathodic intermetallic particles at the surface of the industrial no-rinse CC sprayed automotive aluminium sheet samples.     

Rapid micromachining of high aspect ratio holes in fused silica glass by high repetition rate picosecond laser

We present multiple methods of high aspect ratio hole drilling in fused silica glass, taking advantage of high power and high repetition rate picosecond lasers and flexible beam delivery methods to excise deep holes with minimal collateral damage. Combinations of static and synchronous scanning of laser focus were explored over a range of laser repetition rates and burst-train profiles that dramatically vary laser plume interaction dynamics, heat-affected zone, and heat accumulation physics. Chemically assisted etching of picosecond laser modification tracks are also presented as an extension from femtosecond laser writing of volume nanograting to form high aspect ratio (77) channels. Processing windows are identified for the various beam delivery methods that optimize the laser exposure over energy, wavelength, and repetition rate to reduce microcracking and deleterious heating effects. The results show the benefits of femtosecond laser interactions in glass extend into the picosecond domain, where the attributes of higher power further yield wide processing windows and significantly faster fabrication speed. High aspect ratio holes of 400 μm depth were formed over widely varying rates of 333 holes per second for mildly cracked holes in static-focal positioning through to one hole per second for low-damage and taper free holes in synchronous scanning.     

Pattern transfer and photoluminescence damage assessment of deep-submicrometer features etched by photon-induced cryoetching

We present a study of pattern-transfer and etch-induced damage in photon-induced cryoetching. Features with effective radii as small as 100 nm have been formed in both bulk and layered GaAs/AlGaAs materials. A measurement of the photoluminescence of etch-defined deep- submicrometer structures material suggests that this form of etching results in minimal process-induced damage. Modeling of the luminescence vs feature size for these features shows that the luminescence is limited only by carrier diffusion and non-radiative surface recombination.     

Online stochastic UAV mission planning with time windows and time-sensitive targets

In this paper we simultaneously consider three extensions to the standard Orienteering Problem (OP) to model characteristics that are of practical relevance in planning reconnaissance missions of Unmanned Aerial Vehicles (UAVs). First, travel and recording times are uncertain. Secondly, the information about each target can only be obtained within a predefined time window. Due to the travel and recording time uncertainty, it is also uncertain whether a target can be reached before the end of its time window. Finally, we consider the appearance of new targets during the flight, so-called time-sensitive targets, which need to be visited immediately if possible. We tackle this online stochastic UAV mission planning problem with time windows and time-sensitive targets using a re-planning approach. To this end, we introduce the Maximum Coverage Stochastic Orienteering Problem with Time Windows (MCS-OPTW). It aims at constructing a tour with maximum expected profit of targets that were already known before the flight. Secondly, it directs the planned tour to predefined areas where time-sensitive targets are expected to appear. We have developed a fast heuristic that can be used to re-plan the tour, each time before leaving a target. In our computational experiments we illustrate the benefits of the MCS-OPTW planning approach with respect to balancing the two objectives: the expected profits of foreseen targets, and expected percentage of time-sensitive targets reached on time. We compare it to a deterministic planning approach and show how it deals with uncertainty in travel and recording times and the appearance of time-sensitive targets.     

Potentiometric DNA Sensor Based on Electropolymerized Phenothiazines for Protein Detection

Novel method of potentiometric detection of DNA‐protein interactions has been proposed. For this purpose, polymeric phenothiazine dyes, methylene blue (MB) and methylene green (MG), were electrochemically deposited onto the glassy carbon electrode and covered with double stranded DNA (dsDNA) as a target for antibodies (DNA‐sensor) or DNA aptamer specific to human α‐thrombin (aptasensor). The biosensors were consecutively incubated at pH 7.5 and 3.0 and the difference in potentials, ΔE, was used as a measure of protein concentration. The potentiometric DNA‐sensors were tested in standard serum of autoimmune disease patients (systemic lupus erythemathosus (SLE) and autoimmune thyroidites). It was shown, that the ΔE value of DNA‐sensor depends on the dilution of serum in the range from 1 : 1 to 1 : 100. Nonthermostated serum exhibited bell‐shape dependence of ΔE on serum dilution due to interfering effect of serine proteins at maximum dilution between 1 : 20 and 1 : 50. For SLE serum thermostated at 56 °C the ΔE linearly decreased as a function of serum dilution and reached saturation at dilution 1 : 20. Similarly the changes in the potential of aptasensor allowed us to determine the α‐thrombin in the range from 1 nM to 1 μM. The Faradic impedance spectra measured at presence of redox probe [Fe(CN)₆]^4?/3? revealed changes in the resistance and capacitance attributed to the shielding effect of anti‐DNA antibodies and an increase in the electron transfer. The developed potentiometric biosensors can be used for preliminary diagnostics of autoimmune diseases and thrombin detection with sensitivity comparable to traditional methods. The developed assay is, however simpler and cheaper in comparison with commonly used methods.     

Solid‐Contact Potentiometric Sensor Based on Polyaniline and Unsubstituted Pillar[5]Arene

A novel potentiometric sensor based on screen‐printed carbon electrode covered with electropolymerized polyaniline (PANI) and unsubstituted pillar[5]arene as ionophore has been developed and tested in potentiometric measurements of pH and metal ions. The introduction of pillar[5]arene improved the reversibility of the pH response in the range from 2.0 to 9.0 with the slope of 45 mV/pH. Among metal cations, the response to Fe³⁺ and Ag⁺ ions was referred to PANI redox conversion whereas the signal toward Cu²⁺ in the range from 1.0×10^?6 to 1.0×10^?2 M (limit of detection (LOD) 3.0×10^?7 M) to specific interaction with the macrocycle.     

Comparing Cyclophellitol N‐Alkyl and N‐Acyl Cyclophellitol Aziridines as Activity‐Based Glycosidase Probes

The synthesis and evaluation as activity‐based probes (ABPs) of three configurationally distinct, fluorescent N‐alkyl cyclophellitol aziridine isosteres for profiling GH1 β‐glucosidase (GBA), GH27 α‐galactosidase (GLA) and GH29 α‐fucosidase (FUCA) is described. In comparison with the corresponding acyl aziridine ABPs reported previously, the alkyl aziridine ABPs are synthesized easily and are more stable in mild acidic and basic media, and are thus easier to handle. The β‐glucose‐configured alkyl aziridine ABP proves equally effective in labeling GBA as its N‐acyl counterpart, whereas the N‐acyl aziridines targeting GLA and FUCA outperform their N‐alkyl counterparts. Alkyl aziridines can therefore be an attractive alternative in retaining glycosidase ABP design, but in targeting a new retaining glycosidase both N‐alkyl and N‐acyl aziridines are best considered at the onset of a new study.     

β-Octafluorinated tetrakis(ethoxycarbonyl)porphyrin

Tetrakis(alloxycarbonyl)porphyrin and its β-octafluoro-substituted derivatives were synthesized via Lindsey method and transformed to their zinc complexes.Single crystal X-ray structures of corresponding Zn(Ⅱ) porphyrins revealed that β-octafluorination will give more compactness of porphyrin moieties in the crystal structure owing to the hydrogen bonding interactions involving β-fluorine atoms.An unusual six-coordinated Zn(Ⅱ) was found via intramolecular coordination of oxygen atom of meso-substituents with central Zn(Ⅱ).     

Mesoporous silica hybridized by ordered mesoporous carbon for in‐tube solid‐phase microextraction

To enhance the extraction performance, a mesoporous silica was modified with ordered mesoporous carbon for solid‐phase microextraction. Three stainless‐steel wires coated with the mesoporous material were placed in a polyetheretherketone tube for getting an extraction tube. The tube was coupled to high‐performance liquid chromatography with diode array detector, and the online analysis system was constructed. Then its extraction performance was evaluated using hydrophobic polycyclic aromatic hydrocarbons, phthalates, and hydrophilic neonicotinoids. The best selectivity was presented for polycyclic aromatic hydrocarbons. Several main conditions were optimized such as sampling volume, sampling rate, methanol concentration in the sample, and desorption time, a rapid and sensitive analytical method was established toward polycyclic aromatic hydrocarbons. The analytical method exhibited wide linear range from 0.017 to 15 µg/L with acceptable correlation coefficients more than 0.9990, limits of detection in 0.005‐0.020 µg/L, limits of quantification ranging from 0.017 to 0.066 µg/L as well as large enrichment factors of 377‐2314. It was successfully applied to detect trace polycyclic aromatic hydrocarbons in some real water samples including tap water, snow water, and domestic sewage.     

Single Quality Factor for Enthalpy-Entropy Compensation,Isoequilibrium and Isokinetic Relationships

Enthalpy-entropy compensation (EEC) is very often encountered in chemistry, biology and physics. Its origin is widely discussed since it would allow, for example, a very accurate tuning of the thermodynamic properties as a function of the reactants. However, EEC is often discarded as a statistical artefact, especially when only a limited temperature range is considered. We show that the likeliness of a statistical origin of an EEC can be established with a compensation quality factor (CQF) that depends only on the measured enthalpies and entropies and the experimental temperature range. This is directly derived from a comparison of the CQF with threshold values obtained from a large number of simulations with randomly generated Van ‘t Hoff plots. The value of CQF is furthermore a direct measure of the existence of a genuine isoequilibrium or isokinetic relationship.