Synthesis,spectroscopy and thermal properties of the nickel(II), palladium(II) and copper(II) complexes of oxalyldihydrazide

Summary The new complexes K₂[ML₂]·2H₂O (M=Ni, Cu), K₂[PdL₂]·H₂O, K₂[CuL₂(H₂O)₂]·H₂O, [Ni(LH₂)Cl₂]_x ·xH₂O and [Ni(LH₂)Br₂]_x·1,5xH₂O, where LH₂= oxalyldihydrazide, have been prepared. Emphasis has been put on determining the conditions for the synthesis of both deprotonated and non-deprotonated Ni^II complexes. They were characterized by analyses, conductivity measurements, thermogravimetry, magnetic susceptibility and spectroscopic methods like i.r. and far-i.r., diffuse reflectance u.v. vis, and e.s.r. Monomeric square planar and distorted octahedral structures were found for the deprotonated complexes in the solid state while the non-deprotonated Ni^II complexes appeared to be pseudo-tetrahedral polymers. The doubly deprotonated L²-ion exhibits a bidentate N(amide), N(amide)-coordination, while the neutral LH₂ molecule behaves as a N(amino), N(amino)-bidentate ligand forming polymeric structures. Vibrational analysis of the complexes was carried out, using hydrogen and metal isotopic substitution.     

A modular strategy toward the synthesis of heparin-like oligosaccharides using monomeric building blocks in a sequential glycosylation strategy

A novel flexible assembly strategy is described for the modular synthesis of heparin and heparan sulfates. The reported strategy uses monomeric building blocks to construct the oligosaccharide chain to attain a maximum degree of flexibility. In the assembly, 1-hydroxyl glucosazido- and 1-thio uronic acid donors are combined in a sequential glycosylation protocol using sulfonium triflate activator systems. The key 1-thio uronic acids were obtained in an efficient manner from diacetone glucose employing a chemo- and regioselective oxidation of partially protected glucose and idose thioglycosides.     

Nonadiabatic surface hopping Herman-Kluk semiclassical initial value representation method revisited: applications to Tully's three model systems

The nonadiabatic surface hopping Herman-Kluk (HK) semiclassical initial value representation (SC-IVR) method for nonadiabatic problems is reformulated. The method has the same spirit as Tully's surface hopping technique [J. Chem. Phys. 93, 1061 (1990)] and almost keeps the same structure as the original single-surface HK SC-IVR method except that trajectories can hop to other surfaces according to the hopping probabilities and phases, which can be easily integrated along the paths. The method is based on a rather general nonadiabatic semiclassical surface hopping theory developed by Herman [J. Chem. Phys. 103, 8081 (1995)], which has been shown to be accurate to the first order in h and through all the orders of the nonadiabatic coupling amplitude. Our simulation studies on the three model systems suggested by Tully demonstrate that this method is practical and capable of describing nonadiabatic quantum dynamics for various coupling situations in very good agreement with benchmark calculations.     

Water Relaxation Measurements on Semiquinones of Various Flavoproteins

The water relaxation rates of several flavoproteins in the semiquinone state have been investigated by the spin echo technique. The results indicate a rather unspecific interaction between water and the protein-bound flavosemiquinones. An average interaction distance of 0.3-0.5 nm has been estimated. From the temperature dependence of the rate constants the free energy of activation for proton exchange is calculated to be about 17 kJ/mol. The rate of proton exchange is around 10¹¹ s?¹ for the flavosemiquinones investigated are accessible to water regardless of their ionic state. The large difference in relaxation rates of water protons between D - and L - amino-acid oxidases is noticeable. Oxynitrilase exhibits the highest whereas Azotobacter vinelandii flavodoxin shows the lowest water relaxation rate of the flavoproteins studied. The results are discussed in relation to the visible-light absorption properties of the flavoproteins.     

A noncarbohydrate based approach to polyhydroxylated pyrrolidizines: total syntheses of the natural products hyacinthacine A1 and 1-epiaustraline

[reaction: see text] A flexible route to polyhydroxylated pyrrolizidine alkaloids is described, starting from commercially available N-Boc pyrrole and using a partial reduction as the key step. Tactics for varying the stereochemistry around the ring by choice of partial reduction conditions are discussed and methods for constructing the bicyclic ring system of the pyrrolizidine targets are examined. Intramolecular S(N)2 type displacement reactions were found to be an efficient way of forming the requisite bicyclo ring systems while iodine-promoted cyclizations proved unsuitable. A first synthesis of hyacinthacine A1 is described that also confirmed the structure of the natural product, and a short stereoselective synthesis of 1-epiaustraline is also discussed in detail.     

Gas chromatography-mass spectrometry as a tool for estimating odour concentrations of biofilter effluents at aerobic composting and rendering plants

The relationship between chemical concentrations (gas chromatography–mass spectrometry analysis) and odour concentrations (olfactometry) was studied for biofilter emissions from four aerobic vegetable, fruit and garden waste (VFG) composting plants and one animal rendering plant. For the VFG composting plants, the study revealed a good linear relationship of the odour concentration with the total volatile organic compounds (VOC) concentration (R²=0.97, n=16) as well as with the concentration of esters and ketones (R²=0.9, n=19). For biofilter emissions of the animal rendering plant, the total VOC concentration was a poor estimator for odour concentration. However, for this type of odour, concentrations of organic sulphur containing compounds correlated well with odour concentrations (R²=0.94, n=8). The results of the study also showed that the relationship between chemical and odour concentrations is specific for each type of odour and cannot be generalized.     

Electrochemical activity of various types of aqueous In(III) species at a mercury electrode

An interpretation framework is presented which provides a straightforward means to characterise the electrochemical reactivity of aqueous ions together with their various hydrolysed counterparts. Our novel approach bypasses the more laborious strategy of solving rigorously, for all relevant species, the complete set of Butler-Volmer equations coupled to diffusion differential equations. Specifically, we consider the spatial variable via a Koutecký-Koryta type of differentiation between nonlabile and labile zones adjacent to the electrode. The theory is illustrated by an assessment of the electrochemical reactivity of aqueous In(III) species based upon proper comparison between relevant time scales of the involved interfacial processes, i.e. diffusion, (de)protonation of inner-sphere water, dissociation/release of H₂O and OH⁻, and electron transfer. The analysis reveals that whilst all In(III) species are labile on the experimental timescale with respect to (de)protonation and (de)hydration, there are large differences in the rates of electron transfer between \( \mathrm{In}{\left({\mathrm{H}}_2\mathrm{O}\right)}_6^{3+} \) and the various hydroxy species. Specifically, in the case of \( \mathrm{In}{\left({\mathrm{H}}_2\mathrm{O}\right)}_6^{3+} \), the rate of electron transfer is so slow that it replaces the traditional Eigen rate-limiting water release step in the overall passage from hydrated In³⁺ to its reduced metallic form; in contrast, the In(III) hydroxy species display electrochemically reversible behaviour.

     

Accurate mass determination,quantification and determination of detection limits in liquid chromatography–high-resolution time-of-flight mass spectrometry: Challenges and practical solutions

Uniform guidelines for the data processing and validation of qualitative and quantitative multi-residue analysis using full-spectrum high-resolution mass spectrometry are scarce.     

On the use of AES data analysis to determine local enrichments of conversion coating elements at intermetallic particles on rolled Al

In this paper, the behaviour of the industrial applied Ti/Zr conversion coating (CC) pretreatment on rolled automotive aluminium samples (AA5182) is analysed. Due to its nanometre lateral and depth resolution, Auger electron spectroscopy (AES) is used to analyse the CC distribution at surface cathodic intermetallic particles. As a result of its high surface sensitivity, the AES technique is very susceptible to differences in the top contamination layer thickness. It is demonstrated that AES point measurements performed on aluminium model samples coated with 1.5 and 3 nm of Ti (oxide) layer cannot differentiate the two-layer thicknesses if a difference in the top contamination thickness is not taken into account. A data analysis methodology is introduced, based on the ratio of normalized peak areas (enrichment ratios), to eliminate the effect of the contamination layer thickness. The experimental validation of the methodology is performed on the model samples, demonstrating errors of 2% on the enrichment ratios on similar samples with different contamination layer thicknesses, while the conventional spectra quantification results in errors of 49%. The methodology is also theoretically substantiated within certain constraints. By the use of the AES methodology, an enriched Ti and Zr deposition is confirmed at the cathodic intermetallic particles at the surface of the industrial no-rinse CC sprayed automotive aluminium sheet samples.