Transfer reaction of the polystyrene radical with electron-acceptor molecules of tetrachlorophthalanhydride

The transfer constants (C_s) of the polystyrene radical with some derivatives of phthalic acid have been determined. Among the agents used, tetrachlorophthalanhydride (TCPA) differs distinctly from other compounds by its value of C_s 3·1 × 10^?3 for thermal and 3·4 × 10^?3 for initiated polymerization of styrene. The values of C_s for phthalanhydride, dimethyl phthalate, and tetrachlorodimethyl phthalate are lower by two decimal orders. The considerable decrease in the degree of polymerization of styrene prepared in the presence of TCPA is mainly attributed to the increased reactivity of chlorine atoms in TCPA induced by the acceptor effect of anhydride ring. Participation of a TCPA-styrene complex in transfer reaction has been assumed but not proved.     

Polychlorinated polyamides—III. Synthesis and characterization of polyamides derived from perchloroterephthaloyl dichloride

Six new polyamides have been prepared either by polymerization in solution or by interfacial polymerization by reacting perchloroterephthaloyl dichloride with aromatic diamines. The polymers were characterized by i.r. spectroscopy, elemental analysis, DSC, and TGA. The glass transition temperature, the melting temperature, and the thermal decomposition temperature have been determined. In order to estimate the molecular weights, intrinsic viscosities were determined. Some of the polymers showed high thermal stability.     

Synthesis,characterization and a thermogravimetric study of copper,cobalt and tin mono- and bis-adducts with ethyleneurea,ethylenethiourea and propyleneurea

This paper describes the synthesis, characterization and a thermogravimetric (t.g.) study of 11 adducts of general formula MCl₂·nL (M = Cu, Co and Sn; n = 1 and 2 for Sn, and 2 for Cu and Co; L = ethyleneurea eu, ethylenethiourea etu, and propyleneurea pu). The i.r. results shows that the eu and pu adducts are coordinated through oxygen, whereas for etu nitrogen is the coordination site. The (C=O) or (C=S) trend is: Cu > Co > Sn. The t.g. curves show that the adducts release ligand molecules in a single mass loss step. As regards considering adducts with the same stoichiometry, the observed thermal stability trend is: etu > pu > eu.     

Quantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam

A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam necessary for complete extraction, conditions for the separation of zinc from cadmium, influence of other cations and anions on the zinc sorption by PU foam, and required conditions for back extraction of zinc from the PU foam. The results show that zinc traces can be separated from large amounts of cadmium at pH 3.0±0.50, with the range of thiocyanate concentration from 0.15 to 0.20 mol l⁻¹, and the shaking time of 5 min. The back extraction of zinc can be done by shaking it with water for 10 min. Calcium, barium, strontium, magnesium, aluminum, nickel and iron(II) are efficiently separated. Iron(III), copper(II) and cobalt(II) are extracted simultaneously with zinc, but the iron reduction with ascorbic acid and the use of citrate to mask copper(II) and cobalt(II) increase the selectivity of the zinc extraction. The anions nitrate, chloride, sulfate, acetate, thiosulphate, tartarate, oxalate, fluoride, citrate, and carbonate do not affect the zinc extraction. Phosphate and EDTA must be absent. The method proposed was applied to determine zinc in cadmium salts using 4-(2-pyridylazo)-resorcinol (PAR) as a spectrophotometric reagent. The result achieved did not show significant difference in the accuracy and precision (95% confidence level) with those obtained by ICP–AES analysis.     

Corpuscular diagnostics of a hollow-cathode discharge-III. The metal-ions-regime evolution

The variations in time of mass spectra of ions, extracted from the hollow-cathode discharge in the regime of the intensive sputtering of the cathode material were measured. The mass spectrum changes in time conspicuously. From the results of measurements a distinct anisotropy of ion beam is inferred. The discharge turns into a metal-ions regime.The helpful discussions with Dr. J. Musil are gratefully acknowledged.     

Periodic solutions of a nonlinear propagation equation via a fixed point argument

In this work the initial value problem for the equation $$u_t + \beta u_x + yf(u)_x - \delta u_{xxt} = g,\forall x \in R, \forall t \in [0,T],$$ with periodic boundary conditions is interpreted in the sense of periodic distributions and studied via fixed point arguments. Weak solutions exist iff∈C ⁰ (R) andg∈L ^∞(L ²(0,1)). Moreover, regularity inf, g and the initial data implies regularity of solutions.     

Interdiffusion in the Co-Ni system-I concentration penetration curves and interdiffusion coefficients

The interdiffusion in the Co-Ni system has been investigated in the temperature range of 950 to 1150 °C, by means of diffusion specimens of pure Co and Ni. The concentration curvesN(x, t) obtained with the aid of an JXA-3 A JEOL electron microprobe were evaluated using the smoothing cubic spline method by means of the Boltzmann-Matano equation. The obtained interdififusion coefficient values ¯D increase with the increasing Ni concentration and satisfy the Arrhenius equation at temperaturesH 990 °C. At lower temperatures the influence of high diffusivity paths may be effective, resulting in higher ¯D values. No expressive influence of atomic (Ni₃Co) or magnetic order on the interdiffusion has been detected. The activation enthalpyH values were found almost concentration independent. A Kirkendall effect study has been carried out with positive results which are presented in Part II of this paper. A new method for the determination of diffusants concentration in the Kirkendall plane was proposed. With the use of this method and of Darken equations the intrinsic diffusion coefficients were calculated. These results are given in Part III.     

A model of oxide film originating at thermal oxidation of GaAs

In this paper an approximative procedure to determine of the most probable model of oxide film originating at thermal oxidation of GaAs single-crystal samples within the temperature range 480–530 °C is proposed. It is shown that the system presented is more complicated if compare with that presumed previously.     

Solubility and Flory Huggins parameters of SBES, poly(styrene-b-butene/ethylene-b-styrene) triblock copolymer, determined by intrinsic viscosity

Solubility parameter and Flory Huggins interaction parameter of a triblock SBES have been obtained from intrinsic viscosity measurements. The solubility of the block copolymer in all solvents (methyl-cyclohexane, cyclohexane, cyclopentane, toluene and benzene) was found good except in the case of n-hexane. The results obtained are similar to other found in literature for SBR and SBS rubbers, and indicate that cyclohexane and cyclopentane and methylcyclohexane are the most compatible solvents for this kind of polymer.     

Iron(III)-catalyzed Prins-type cyclization using homopropargylic alcohol: a method for the synthesis of 2-alkyl-4-halo-5,6-dihydro-2H-pyrans

[reaction: see text] A new Prins-type cyclization between homopropargylic alcohol and aldehydes in the presence of FeX(3) to obtain 2-alkyl-4-halo-5,6-dihydro-2H-pyrans in good yield is described. Osmium-catalyzed cis dihydroxylation provided direct access to trans-2-alkyl-3-hydroxy-tetrahydro-pyran-4-ones. Anhydrous ferric halides are also shown to be excellent catalysts for the standard Prins cyclization using homoallylic alcohol. Isolation of an intermediate acetal provides substantiation of a proposed mechanism.