环境水中甲基对硫磷、对硫磷和辛硫磷农药残留的SPE-HPLC分析

采用离线固相萃取 (SPE)富集 -高效液相色谱(HPLC)分离和紫外分光光度法检测 ,对环境水中甲基对硫磷、对硫磷和辛硫磷3种有机磷农药进行分析;固相萃取用C18 萃取柱 ,用甲醇洗脱 ,高效液相色谱分离以Shim_PackCLCODS柱(150mm×4.6mmid,5μm)为分离柱 ,流动相为甲醇 -水(体积比70∶30) ,紫外检测波长为280nm;该法稳定可靠 ,回收率高     

The evolution of poly(lactic acid) degradability by dielectric spectroscopy measurements

Dielectric spectroscopy is a powerful method that allows the study of the dynamics of polymers in a wide frequency range. The different regimes of the dielectric spectra can be observed and the dynamics of the primary and secondary relaxations can be found.In this work, the systems investigated included industrial and purified poly(lactic acid), PLA. This is an aliphatic polyester, one of the most important biocompatible and biodegradable material that has received increasing attention in the last 10 years.Thermal analyses indicated that the glass transition temperature of the polymer was about 320 K.The β relaxation was observed between −150 °C and −30 °C, depending on the measurement frequency (1 Hz-100 kHz), and was assigned to the secondary relaxation in the glassy state. We studied the changes that are connected with the water penetration in the polymer, and directly affect that relaxation process. Water molecules confined by polymer chains and in the polymer networks play an important role in the degradation of the matrix, and then we can observe the evolution of that degradation during some weeks, in a controlled humidity environment. It is accepted that water preferentially enters in the amorphous zones, but also affects the crystalline regions. It is observed a clear evolution of the relaxation activation energy during the degradation of the polymer.The dielectric relaxation results are complemented with molar mass measurements during the degradation process with time.     

Synthesis,renal vasodilator and dopamine-sensitive adenylate cyclase activities of O-Methyl derivatives of 6-chloro-2,3,4,5-tetr ahydro-1-(4-hydroxyphenyl)-1H-3-benzazepin-7,8-diol (SK&F 82526)

The three possible mono-O-methyl derivatives of 6-chloro-2,3,4,5-tetrahydro-1-(4-hydroxyphenyl)-1H-3-benzazepin-7,8-diol (SK&F 82526) ( 1 ) have been synthesized to facilitate the isolation and characterization of metabolites of this compound and for biological testing. The syntheses generally involved preparation of appropriately substituted benzaldehydes, conversion of these to phenylacetic acids and use of these to N-acylate arylethanolamines. The phenylacetamides thus formed were reduced to amines and these were deprotected and cyclized to the desired final products. In one case deprotection followed cyclization. These compounds were tested as activators of dopamine-sensitive adenylate cyclase (a measure of DA-1 agonist activity) and as renal vasodilators. All three O-methyl derivatives were much less potent than 1 in cyclase activation and as renal vasodilators. Weak inhibition of adenyl cyclase was also observed for all three compounds and one showed weak renal vasoconstrictor activity. Preliminary investigation of the metabolism of 1 disclosed that two of the three monomethoxy compounds were formed in trace amounts in the rat and the dog. In a related investigation, the trimethoxy derivative of 1 was subjected to acid-catalyzed hydrolysis conditions. The relative ease of cleavage of methoxy groups was 7 > > 4′ > 8.     

Colorful Friedel-Crafts chemistry of meso-tetraarylporphyrins. An unexpected route to porphyrinic spiro dimers

Under Friedel-Crafts conditions, meso-tetraarylporphyrins give porphyrin spiro dimers in good yield. This reaction involves acylation, acid-catalyzed cyclization, and dimerization. A stable dimer possessing three additional six-membered rings could be isolated and its structure determined. By modifying the substrate and reagents, intermediates could be isolated and characterized. The reactivity of the substrates, the side-reactions, and the concentration requirements to form the dimers, all explain why this reaction remained apparently unexplored in the widely used meso-tetraarylporphyrin series. [reaction: see text]     

Shot noise sets the limit of quantification in electrochemical measurements

Detection of single molecules, particles, and rapid redox events is a challenge of electrochemical investigations and requires either an amplification strategy or significant averaging for the electrochemical current to exceed the noise level. We consider the minimum number of electrons required to reach the limit of quantification in these electrochemical measurements. A survey of the literature indicates that the state-of-the-art limit in current detection for different types of measurements (e.g. voltammetry, single-molecule redox cycling, ion channel recordings of single molecules, metal nanoparticle collision, and phase nucleation) is independent of the nature of the measurement and increases linearly with reciprocal response time, Δt^?1, over ～5 orders of magnitude (from ～10 to ～10⁶ s^?1). We demonstrate that the practical limit of quantification requires cumulative measurement of ～2100 electrons during Δt and is determined by statistics of counting electrons, that is, the shot noise in the current.     

Acid-Catalyzed Amine-Borane Reduction of Nitrite

The rate of reduction of nitrite by trimethylamine-borane was followed by observing the decrease in nitrite absorbance under pseudo-first-order conditions. The reaction is acid-catalyzed and exhibits a first-order dependence on both amine-borane and total nitrite concentration. The molar equivalence of NaNO(2) to (CH(3))(3)NBH(3) = 2:1. Equimolar amounts of hydrogen and nitrous oxide are formed, and the molar ratio of nitrite reacted to N(2)O produced is 2:1. In concentrated HCl or H(2)SO(4), a correlation of rate with the Hammett acidity function, h(o), is observed. The reaction is subject to a pronounced inversesolvent isotope effect (k(D)()2(O)/k(H)()2(O) approximately 2.7) and a modest normal substrate effect (k((CH)()3())()3(N.BH)()3/k((CH)()3())()3(N.BD)()3 approximately 1.4). The reaction is first-order in H(3)O(+) in the region pH 0.7-2.7, but a second-order dependence is observed above pH 4 with the transition occurring at pH approximately pK(a) for HNO(2). Results are consistent with a mechanistic model involving preequilibration protonation of molecular nitrous acid followed by rate-limiting hydride attack on H(2)ONO(+) or free NO(+) to produce nitrosyl hydride as a reactive intermediate.     

Chemical markup,XML, and the World Wide Web. 4. CML schema

A revision to Chemical Markup Language (CML) is presented as a XML Schema compliant form, modularized into nonchemical and chemical components. STMML contains generic concepts for numeric data and scientific units, while CMLCore retains most of the chemical functionality of the original CML 1.0 and extends it by adding handlers for chemical substances, extended bonding models and names. We propose extension via new namespaced components for chemical queries, reactions, spectra, and computational chemistry. The conformance with XML schemas allows much greater control over datatyping, document validation, and structure.     

Ground states of molecules. 53.MNDO calculations for molecules containing chlorine

MNDO calculations of heats of formation, dipole moments, ionization potentials, and structures are reported for a wide range of compounds containing chlorine in its characteristic valence state (Cl^I) and one or more of the elements H, B, Be, C, N, O, and F. The calculated errors in the heats of formation and the dipole moments are not significantly greater than those previously reported for compounds containing no chlorine. First vertical ionization potentials were on average 0.95 eV too high. The ordering of higher cationic states was found to be correct, even for species such as Cl₂O, Cl₂, and HOCl, where ab initio–Koopmans' theorem calculations predict the incorrect ordering. The calculated energies and geometries of compounds such as CIF₃ are qualitatively incorrect, probably because of the lack of 3d atomic orbitals in the orbital basis set.