A study of the Arrhenius behavior of the co-precipitation of radium, barium and strontium sulfate

Co-precipitation of radium, barium and strontium is an important process in many contexts, such as uranium mining, oil extraction and in the safety assessment of a final repository for used nuclear fuel. Co-precipitation to a solid solution is possible since radium, barium and strontium act as chemical analogues. In this work the co-precipitation of radium, barium and strontium was studied and the kinetic behavior of the co-precipitation process was investigated. It was shown that radium, barium and strontium co-precipitate congruently and that the precipitation followed an Arrhenius behavior and the Arrhenius parameters for the systems was determined. When studying the differences of the Arrhenius constants by using a student t test (95 % confidence interval) it was observed that the only significant difference in the activation energy, E _a, is between radium and barium and between radium and strontium respectively, the pure strontium having the larger activation energy in comparison. This is most likely coupled to the metal ion size; since the hydration waters are more strongly bound, which leads to them having a slower exchange rate, which in turn effects the rate of co-precipitation to the metal these reactions will be slower.     

The vane method and kinetic modeling: shear rheology of nanofibrillated cellulose suspensions

We conduct rheological characterization of nanofibrillated cellulose (NFC) suspensions, a highly non-Newtonian complex fluid, at several concentrations. Special care is taken to cope with the prevalent problems of time scale issues, wall depletion and confinement effects. We do this by combining the wide-gap vane geometry, extremely long measurement times, and modeling. We take into account the wide-gap related stress heterogeneity by extending upon mainstream methods and apply a gap correction. Furthermore, we rationalize the experimental data through a simple viscous structural model. With these tools we find that, owing to the small size of the particles subjected to Brownian motion, the NFC suspensions exhibit a critical shear rate, where the flow curve experiences a turning point. This makes the steady state of these suspensions at low shear rates non-unique. To optimize various mixing and pumping applications, such history dependent tendency of NFC suspensions to shear band needs to be taken into account.     

[B(O–C6H4–CN)4]– based Silver and Copper Coordination Polymers

A series of new coordination polymers bearing the [B(O–C₆H₄–CN)₄]^– anion was synthesized. Two new, one dimensional coordination frameworks of the type M[B(O–C₆H₄–CN)₄] (M = Ag, Cu) were obtained by salt metathesis. The reactivity towards organic Lewis‐bases was studied. The reaction with bidentate ligands yielded two dimensional networks with the general formula [M(L)][B(O–C₆H₄–CN)₄] {L = 2,2′‐bipyridine, 4,4′‐bipyridine, 1,2‐bis(pyridyl)ethane, 1,4‐diazabicyclo[2.2.2]octane}. The synthesis, properties and single crystal structure are reported.     

The role of MFC/NFC swelling in the rheological behavior and dewatering of high consistency furnishes

The influence of swelling on the rheological and dewatering properties of high consistency nanocellulose based furnishes is considered. Different consistencies of suspensions (1–4 %) and furnishes (5–15 %) were prepared made of two distinctly different grades of nanocellulose containing, micro fibrillated (MFC) and nanofibrillated (NFC) cellulose, and systematic comparison between the rheological and dewatering parameters was conducted. The characterization of the rheological and dewatering properties was performed with a stress controlled rheometer combined with an immobilization cell in parallel plate geometry, as well as with an independent gravimetric dewatering device. The surface charge of nanofibrillated cellulose was found to influence the rheological and dewatering properties of the evaluated suspensions and furnishes due to its impact on swelling and effectively bound water. Due to the complex behavior of the novel materials, the immobilization times were difficult to determine from the changes in the damping factor, as often used for coating colors. Instead, we propose a modified method for determination of immobilization times based on a rheological analysis adopting the rate of change in viscoelastic loss factor over time, d(tan δ = G′′/G′)/dt, describing the critical point(s) in the ratio of the viscous to elastic stress response moduli. With this approach we show that it is possible to characterize immobilization of these materials incorporating the concept of the combined physical interactions of the components and the non-removable bound water, without requiring a direct measure of the nanocellulose surface swelling. Based on the results, we hypothesize that fibrillar swelling impacts the dewatering of MFC and NFC suspensions, and furnishes containing them, by an interfiber pore connectivity blocking/sealing mechanism, which effectively defines the immobilization of the material matrix at the end point of free water extraction caused by the physical blocking imposed by the remaining bound water.     

Recrystallization of 223Ra with barium sulfate

In this work, the kinetics of barium sulfate recrystallization has been studied in acidic 0.01 mol dm^?3 sodium sulfate solution using ²²³Ra and ¹³³Ba tracers at very low total radium concentration, i.e. less than 10^?13 mol dm^?3. It was found that the system follows the homogeneous recrystallization model and that recrystallization rates, inferred by the decrease of ²²³Ra and ¹³³Ba in the aqueous solution, are fast. Therefore, even at very low concentrations, below the solubility limit, radium will be retained by barium sulfate—a mineral present in the deep underground repository.     

Graphene screen‐printed radio‐frequency identification devices on flexible substrates

Despite the great promise of printed flexible electronics from 2D crystals, and especially graphene, few scalable applications have been reported so far that can be termed roll‐to‐roll compatible. Here we combine screen printed graphene with photonic annealing to realize radio‐frequency identification devices with a reading range of up to 4 meters. Most notably our approach leads to fatigue resistant devices showing less than 1% deterioration of electrical properties after 1000 bending cycles. The bending fatigue resistance demonstrated on a variety of technologically relevant plastic and paper substrates renders the material highly suitable for various printable wearable devices, where repeatable dynamic bending stress is expected during usage. All applied printing and post‐processing methods are compatible with roll‐to‐roll manufacturing and temperature sensitive flexible substrates providing a platform for the scalable manufacturing of mechanically stable and environmentally friendly graphene printed electronics.

     

A Comprehensive Study on the Full Series of Alkali-Metal Selenocyanates AI[SeCN] (AI=Li−Cs)

The full series of quasibinary alkali-metal selenocyanates was synthesized either by oxidation of the respective cyanides (A=Li−Rb) or by metathesis (A=Cs). For Li[SeCN] only ball-milling and subsequent annealing led to the isolation of the quasibinary selenocyanate. Their structures were refined from single-crystal and powder X-ray data. The respective solid-state IR and Raman spectra were interpreted with the aid of solid-state quantum-mechanical calculations and DSC-TGA measurements allowed for extraction of melting points. Only for Li[SeCN] a possible phase transition was observed that is discussed on the basis of VT-PXRD experiments. It is also the only quasibinary selenocyanate to form a hydrate (Li[SeCN] ⋅ 2H₂O).