In this work, the kinetics of barium sulfate recrystallization has been studied in acidic 0.01 mol dm?3 sodium sulfate solution using 223Ra and 133Ba tracers at very low total radium concentration, i.e. less than 10?13 mol dm?3. It was found that the system follows the homogeneous recrystallization model and that recrystallization rates, inferred by the decrease of 223Ra and 133Ba in the aqueous solution, are fast. Therefore, even at very low concentrations, below the solubility limit, radium will be retained by barium sulfate—a mineral present in the deep underground repository. 相似文献
A small and very simple electromembrane extraction probe (EME-probe) was developed and coupled directly to electrospray ionization mass spectrometry (ESI-MS), and this system was used to monitor in real time in vitro metabolism by rat liver microsomes of drug substances from a small reaction (incubation) chamber (37 °C). The drug-related substances were continuously extracted from the 1.0 mL metabolic reaction mixture and into the EME-probe by an electrical potential of 2.5 V. The extraction probe consisted of a 1-mm long and 350-μm ID thin supported liquid membrane (SLM) of 2-nitrophenyl octyl ether. The drugs and formed metabolites where extracted through the SLM and directly into a 3 μL min?1 flow of 60 mM HCOOH inside the probe serving as the acceptor solution. The acceptor solution was directed into the ESI-MS-system, and the MS continuously monitored the drug-related substances extracted by the EME-probe. The extraction efficiency of the EME-probe was dependant on the applied electrical potential and the length of the SLM, and these parameters as well as the volume of the reaction chamber were set to the values mentioned above to avoid serious depletion from the reaction chamber (soft extraction). Soft extraction was mandatory in order not to affect the reaction kinetics by sample composition changes induced by the EME-probe. The EME-probe/MS-system was used to establish kinetic profiles for the in vitro metabolism of promethazine, amitriptyline and imipramine as model substances. 相似文献
Designing and evaluating novel dye concepts is crucial for the development of the field of dye-sensitized solar cells (DSSCs). In our recent report, the novel concept of tethering the anti-aggregation additive chenodeoxycholic acid (CDCA) to dyes for DSSC was introduced. Based on the performance improvements seen for this modification, the aim of this study is to see if a simplified anti-aggregation unit could achieve similar results. The following study reports the synthesis and photovoltaic characterization of two novel dyes decorated with the steric ethyladamantyl moiety on the π-spacer, and on the triarylamine donor. This modification is demonstrated to be successful in increasing the photovoltages in devices employing copper-based electrolytes compared to the non-modified reference dye. The best photovoltaic performance is achieved by a device prepared with the adamantyl decorated donor dye and CDCA, this device achieves a power conversion efficiency of 6.1 % (Short-circuit current=8.3 mA cm−2, Open-circuit voltage=1054 mV, Fill factor=0.69). The improved photovoltaic performance seen for the adamantyl decorated donor demonstrate the potential of ethyladamantyl side chains as a tool to ensure surface protection of TiO2. 相似文献
The measurement uncertainty of illuminance and, consequently, luminous flux and luminous efficacy of LED lamps can be reduced with a recently introduced method based on the predictable quantum efficient detector (PQED). One of the most critical factors affecting the measurement uncertainty with the PQED method is the determination of the aperture area. This paper describes an upgrade to an optical method for direct determination of aperture area where superposition of equally spaced Gaussian laser beams is used to form a uniform irradiance distribution. In practice, this is accomplished by scanning the aperture in front of an intensity-stabilized laser beam. In the upgraded method, the aperture is attached to the PQED and the whole package is transversely scanned relative to the laser beam. This has the benefit of having identical geometry in the laser scanning of the aperture area and in the actual photometric measurement. Further, the aperture and detector assembly does not have to be dismantled for the aperture calibration. However, due to small acceptance angle of the PQED, differences between the diffraction effects of an overfilling plane wave and of a combination of Gaussian laser beams at the circular aperture need to be taken into account. A numerical calculation method for studying these effects is discussed in this paper. The calculation utilizes the Rayleigh–Sommerfeld diffraction integral, which is applied to the geometry of the PQED and the aperture. Calculation results for various aperture diameters and two different aperture-to-detector distances are presented. 相似文献
Despite the great promise of printed flexible electronics from 2D crystals, and especially graphene, few scalable applications have been reported so far that can be termed roll‐to‐roll compatible. Here we combine screen printed graphene with photonic annealing to realize radio‐frequency identification devices with a reading range of up to 4 meters. Most notably our approach leads to fatigue resistant devices showing less than 1% deterioration of electrical properties after 1000 bending cycles. The bending fatigue resistance demonstrated on a variety of technologically relevant plastic and paper substrates renders the material highly suitable for various printable wearable devices, where repeatable dynamic bending stress is expected during usage. All applied printing and post‐processing methods are compatible with roll‐to‐roll manufacturing and temperature sensitive flexible substrates providing a platform for the scalable manufacturing of mechanically stable and environmentally friendly graphene printed electronics.
Binders present an important part of the powder metallurgy technology as they are vital to provide efficient powder agglomeration and/or lubrication during shaping. At the same time, they have to be easily removed from the compacts during initial stages of sintering without any harmful effect for the base material, as well as for the environment. Therefore, behavior of gelatin as a binder for stainless- and tool-steel gas-atomised powder compacts was studied by thermal analysis and electron microscopy. Thermal analysis showed that peak mass-loss occurred in the range between 340 and 370 °C, depending on the base powder and heating rate. Risk for base powder oxidation at temperatures below 425 °C was detected. Based on the obtained results, it is recommended to perform debinding at ~425 °C after applying a heating rate of around 7.5 °C min?1. Only in this way efficient enough binder removal can be obtained concurrently to avoiding base powder oxidation. 相似文献
Three dimensional hierarchical materials are widespread in nature but are difficult to synthesize by using self‐assembly/organization. Here, we employ a gel–liquid interface to obtain centimeter‐long ~100 μm diameter tubes with complex mineral wall structures that grow from the interface into solution. The gel, made from gelatin, is loaded with metal chloride salt, whereas the solution is a high pH anion source. Tubes were obtained with a range of cations (Ca2+, Sr2+, Ba2+, Cu2+, and Zn2+) and anions (CO32? and PO43?). The crystalline phases found in the tube walls corresponded to expectations from solution chemistries and phase solubilities. The growth mechanism is found to be akin to that of chemical gardens. The divalent cations modify the strength of the gelatin gel in a manner that involves not only simple electrostatic screening, but also ion‐specific effects. Thus, tubes were not obtained for those ions and/or concentrations that significantly changed the gel’s mechanical structure. At high Cu2+ loading, for example, vertical convection bands, not Liesegang bands, were observed in the gels. 相似文献
We present a robust protocol based on iterations of free energy perturbation (FEP) calculations, chemical synthesis, biophysical mapping and X-ray crystallography to reveal the binding mode of an antagonist series to the A2A adenosine receptor (AR). Eight A2AAR binding site mutations from biophysical mapping experiments were initially analyzed with sidechain FEP simulations, performed on alternate binding modes. The results distinctively supported one binding mode, which was subsequently used to design new chromone derivatives. Their affinities for the A2AAR were experimentally determined and investigated through a cycle of ligand-FEP calculations, validating the binding orientation of the different chemical substituents proposed. Subsequent X-ray crystallography of the A2AAR with a low and a high affinity chromone derivative confirmed the predicted binding orientation. The new molecules and structures here reported were driven by free energy calculations, and provide new insights on antagonist binding to the A2AAR, an emerging target in immuno-oncology. 相似文献
Recently fast lithium ion conductors were discovered in compounds containing tetrahedral SiP48– and GeP48– units. In the context of material development for all solid state batteries the ternary Li/Ge/P phase system has been further investigated and two new lithium phosphidogermanates were discovered on the lithium poor side of the ternary composition diagram. Li2GeP2 crystallizes in space group I41/acd with unit cell parameters of a = 12.3069(1) Å and c = 19.0306(4) Å, consists of a framework of Ge4P10 supratetrahedra, and exhibits an ionic conductivity of 1.5(3)×10–7 S · cm–1 at 27 °C. LiGe3P3 crystallizes in Pbam with a = 9.8459(5) Å, b = 15.7489(7) Å, and c = 3.5995(2) Å. In LiGe3P3 Ge and P atoms form a two dimensional polyanion. The slabs consist of five- and six-membered heteroatomic rings comprising GeP4 and Ge(P3Ge) tetrahedra including homoatomic Ge–Ge bonds. A semiconducting behavior with an electronic conductivity of ∼10–4 S · cm–1 and a remarkable stability vs. air and moisture is observed. 相似文献