Salt crystallization as damage mechanism in porous building materials--a nuclear magnetic resonance study

Salts can damage building materials by chemical reactions or crystallization, which is a serious threat to cultural heritage. In order to develop better conservation techniques, more knowledge of the crystallization processes is needed. In a porous material, the size of a salt crystal is limited by the sizes of the pores. It has been predicted that as a consequence, the solubility of a salt increases with decreasing pore size. This increase seems to be related to an increase of the stress generated by a crystal on the pore wall. It has been suggested that the resulting stress could become high enough to induce failure. We have studied the crystallization of salts in porous materials with well-defined pore sizes. Samples were saturated at 40 degrees C with saturated Na2SO4 and Na2CO3 solutions. Next we have cooled the samples to 0 degrees C and waited for nucleation. After nucleation occurred, the solubility in the porous material was measured with nuclear magnetic resonance (NMR) as a function of the temperature. The measurements on Na2CO3 indeed show an increase in solubility with a decrease in pore size. For Na2SO4, we did not observe a pore size-dependent solubility. However, we have to remark that these results show a metastable crystal phase. The results can be used to calculate the actual pressure exerted by the crystals onto the pore wall.     

Weakly dispersive band near the fermi level of GaMnAs due to Mn interstitials

The nature of the weakly dispersive electronic band near the Fermi level observed in photoemission experiments on the diluted magnetic semiconductor GaMnAs is investigated theoretically. The combination of experimental features appears puzzling. We show that the formation of the band is closely related to the presence of the Mn interstitial impurities. The states forming the band have predominantly minority-spin Mn-3d character. The low experimental Mn-3d intensity is explained by the low content of the interstitial Mn impurities. The features of the band are robust with respect to the calculational technique [local density approximation (LDA), LDA + U].     

Singular Sturm-Liouville problems whose coefficients depend rationally on the eigenvalue parameter

Let −Dω(·,z)D+q be a differential operator in L²(0,∞) whose leading coefficient contains the eigenvalue parameter z. For the case that ω(·,z) has the particular form

     

Noise annoyance from stationary sources: relationships with exposure metric day-evening-night level (DENL) and their confidence intervals

Relationships between exposure to noise [metric: day-evening-night levels (DENL)] from stationary sources (shunting yards, a seasonal industry, and other industries) and annoyance are presented. Curves are presented for expected annoyance score, the percentage "highly annoyed" (%HA, cutoff at 72 on a scale from 0 to 100), the percentage "annoyed" (%A, cutoff at 50 on a scale from 0 to 100), and the percentage "(at least) a little annoyed" (%LA, cutoff at 28 on a scale from 0 to 100). The estimates of the parameters of the relations are based on the data from a field study (N=1875) at 11 locations (2 shunting yards, 1 seasonal industry, 8 other industries) in the Netherlands. With the same (yearly) DENL, the seasonal industry causes less annoyance than the other industries, while the other industries cause less annoyance than the shunting yards. It appears that annoyance caused by vibrations from shunting yards and annoyance caused by noise from through trains are (partly) responsible for the relatively high annoyance from shunting yards. The relatively low annoyance from the seasonal industry presumably is related to the presence of a relatively quiet period. Results for the two shunting yards and the seasonal industry are based on fewer data than the other industrial sources, and are indicative. The same patterns of influence of age and noise sensitivity that are generally found are also found in this study. For comparison, results regarding transportation sources are also given, including previously unpublished results for expected annoyance.     

Microbial adhesion to poly(ethylene oxide) brushes: influence of polymer chain length and temperature

Glass surfaces were modified by end-grafting poly(ethylene oxide) (PEO) chains having molecular weights of 526, 2000, or 9800 Da. Characterization using water contact angles, ellipsometry, and X-ray photoelectron spectroscopy confirmed the presence of the PEO brushes on the surface with estimated lengths in water of 2.8-, 7.5-, and 23.7-nm, respectively. Adhesion of two bacterial (Staphylococcus epidermidis and Pseudomonas aeruginosa) and two yeast (Candida albicans and Candida tropicalis) strains to these brushes was studied and compared to their adhesion to bare glass. For the bacterium P. aeruginosa and the yeast C. tropicalis, adhesion to the 2.8-nm brush was comparable to their adhesion on bare glass, whereas adhesion to the 7.5- and 23.7-nm brushes was greatly reduced. For S. epidermidis, adhesion was only slightly higher to the 2.8-nm brush than that to the longer brushes. Adhesion of the yeast C. albicans to the PEO brushes was lower than that to glass, but no differences in adhesion were found between the three brush lengths. After passage of an air bubble, nearly all microorganisms adhering to a brush were removed, irrespective of brush length, whereas retention of the adhering organisms on glass was much higher. No significant differences were found in adhesion nor retention between experiments conducted at 20 and those conducted at 37 degrees C.     

Spatial separation of the traveling and evanescent parts of dipole radiation

Electric dipole radiation consists of traveling and evanescent plane waves. When radiation is detected in the far field, only the traveling waves will contribute to the intensity distribution, as the evanescent waves decay exponentially. We propose a method to spatially separate the traveling and evanescent waves before detection. It is shown that when the radiation passes through an interface, evanescent waves can be converted into traveling waves and can subsequently be observed in the far field. Let the radiation be observed under angle theta(t) with the normal. Then there exists an angle theta(ac) such that for 0 < or = theta(t) < theta(ac) all intensity originates in traveling waves, whereas for theta(ac) < theta(t) < pi/2 only evanescent waves contribute. It is shown that with this technique and under the appropriate conditions almost all far-field power can be provided by evanescent waves.     

Absence of zero-bias anomaly in spin-polarized vacuum tunneling in Co(0001)

In a joint experimental and theoretical study, we investigate the bias-voltage dependence of the tunnel magnetoresistance (TMR) through a vacuum barrier. The TMR observed by spin-polarized scanning tunneling microscopy between an amorphous magnetic tip and a Co(0001) sample is almost independent of the bias voltage at large tip-sample separations. Whereas qualitative understanding is achieved by means of the electronic surface structure of Co, the experimental findings are compared quantitatively with bias-voltage dependent first-principles calculations for ballistic tunneling. At small tip-sample separations, a pronounced minimum in the experimental TMR was found at +200 mV bias.     

Application of partial observability for analysis and design of synchronized systems

Synchronization in identical drive-response systems is a problem that can be cast in an observer design framework. In this paper we extend this approach by studying the analysis/design of partial synchronization by means of observer theory. In doing so, we introduce the concept of partial observer--an observer to reconstruct a part of the system state vector. It is also shown how the observability condition can be utilized to analyze the dynamics in an array of coupled identical systems.     

Synthesis of 2,6-bridged piperazine-3-ones by N-acyliminium ion chemistry

Several 2-substituted and 2,5-disubstituted piperazine-3,6-diones were synthesized starting from readily available alpha-amino acids. After activation of a lactam carbonyl via introduction of a methoxycarbonyl group onto nitrogen, this carbonyl was selectively reduced. Treatment of the resulting urethane with protic acid generated the corresponding N-acyliminium ion, which was trapped by a nucleophilic C2-side chain to provide 2,6-bridged piperazine-3-ones. Several aromatic, heteroaromatic, and nonaromatic side chains were used as pi-nucleophiles. In addition, the effect of the presence of a C5-methyl group on the stereochemical outcome of the cyclization was examined.