邻硝基酚醚上的异常取代反应

以2-(2-硝基苯氧基)-1-溴乙烷或3-(2-硝基苯氧基)-1-溴丙烷为原料分别在氢化钠作用下与N-Boc-4-羟基哌啶反应,得到了与预期结构不同的产物.该产物的结构经1H NMR,13C NMR,LC-MS分析表明,其并非为原料2-(2-硝基苯氧基)-1-溴乙烷与N-Boc-4-羟基哌啶发生Williamson反应生成预期的混合醚,而是芳环上的烷氧基被取代的异常产物.根据这个实验结果,推测上述反应的可能机理是发生了芳环上的亲核取代反应.     

The study on the dynamic response performance of PEMFC with electrodeposited RuO_2·xH_2O-Pt/C electrode

Dynamic response performance of proton exchange membrane (PEM) fuel cells affects its durability and reliability significantly. In this study, electrodeposited RuO2 xH2O-Pt/C was prepared to promote the PEM fuel cell dynamic response performance. The prepared RuO2 xH2O-Pt/C was characterized by scanning electron microscopy (SEM) equipped with energy disperse spectroscopy (EDS), which shows that RuO2 xH2O was electrodeposited on the surface of Pt/C. Performance of single cells with and without RuO2 xH2O-Pt/C at the cathode under a certain operating condition was studied using cyclic voltammetry, electrochemical impedance spectra (EIS) and polarization curve techniques. When the fuel cell modified with RuO2 xH2O-Pt/C was operated at lower pressure, a faster and more stable dynamic response could be found. Modifying with RuO2 xH2O-Pt/C composite material not only slightly increases the single cell performance but also dramatically improves the dynamic response performance, revealing that RuO2 xH2O-Pt/C can buffer the voltage undershoot whenever the current increases instantly.     

Doubly and triply linked porphyrin-perylene monoimides as near IR dyes with large dipole moments and high photostability

Doubly and triply linked porphyrin-perylene monoimides 3 and 4, with extraordinary stability, large dipole moments, and strong near IR absorption, were prepared by means of one-pot oxidative cyclodehydrogenation promoted by FeCl(3).     

Simultaneous determination of fumonisins B1, B2 and B3 contaminants in maize by ultra high-performance liquid chromatography tandem mass spectrometry

The present work developed an analytical method for simultaneous determination of fumonisins B(1), B(2) and B(3) residues in maize by ultra high-performance liquid chromatography combined with electrospray ionization triple quadrupole tandem mass spectrometry (UHPLC-MS/MS) under the multiple reaction monitoring (MRM) mode, and especially focused on the optimization of extraction, clean-up, UHPLC separation and MS/MS parameters. The method involves addition of fumonisins isotope internal standards, extraction with a mixture of acetonitrile and water and clean-up with solid-phase extraction (SPE) cartridges before UHPLC-MS/MS analysis. A single-laboratory method validation was conducted by testing three different spiking levels for repeatability and recovery according to International Union of Pure and Applied Chemistry (IUPAC) guidelines. The LOQ of FB(1), FB(2) and FB(3) were 1.50, 1.65 and 0.4 μg kg(-1), respectively, which were lower than the criteria of EU, USA and other countries regarding minimum residue limits of fumonisins in foods including baby foods and feedstuffs. Recoveries of three fumonisins ranged from 80.9% to 97.0% with RSD values of 2.4-11.1%.The advantages of this method include simple pretreatment, rapid determination and high sensitivity, and it fulfills the requirements for food analysis with respect to minimum residue limits of fumonisins in various countries.     

Ultra-high capacity liquid chromatography chip/quadrupole time-of-flight mass spectrometry for pharmaceutical analysis

Nanoflow liquid chromatography/mass spectrometry (nano-LC/MS) has attracted increasing interest in virtue of high sensitivity, low sample consumption, and minimal matrix effect. In this work a HPLC-Chip/quadrupole time-of-flight (Q-TOF) MS device with a new ultra-high capacity small molecule chip (UHC-Chip) which features a 500 nL enrichment column and a 150 mm × 75 μm analytical column, was evaluated with a drug mixture covering a wide range of polarities. Excellent chromatographic precision with 0.1-0.5% RSD for retention time and 1.7-9.0% RSD for peak area, low limit of detection, good chip-to-chip reproducibility and linearity were obtained by using this UHC-Chip. Compared with the standard HPLC-Chip with 40 nL trapping column, the UHC-Chip showed higher enrichment capability and hence gave a higher response in signal detection. Additionally, 4-30 times increase in sensitivity was obtained compared with conventional LC/MS, which indicated that UHC-Chip/MS was a valuable tool for the quantitative analysis of low level impurities and degradation products in pharmaceuticals. Moreover, satisfactory results obtained from trace drug analysis of serum samples further proved its practicality and potential for use in drug testing and development.     

Nucleic acids determination using the complex of eriochrome black T and silver nanoparticles in a resonance light scattering technique

A novel method for the determination of nucleic acids by using silver nanoparticle (AgNPs)-eriochrome black T (EBT) as a resonance light scattering (RLS) probe has been developed. Under optimum conditions, there are linear relationships between the quenching extent of RLS intensity and the concentration of nucleic acids in the range of 4.0×10(-9)-4.0×10(-7), 4.0×10(-7)-1.6×10(-6) g mL(-1) for fish sperm DNA (fsDNA) and 4.0×10(-8)-2.0×10(-6) g mL(-1) for yeast RNA (yRNA). Their detection limits (S/N=3) are 2.0 ng mL(-1) and 21 ng mL(-1), respectively. The results indicate that AgNPs can form wirelike aggregates and nanoslices in the presence of the EBT. Whereas, when nucleic acids are added into the AgNPs-EBT system, the dynamic balance of AgNPs-EBT system is destroyed and the nanoparticles undergo dispersion again, leading to the RLS intensity of AgNPs-EBT system quenching. Meanwhile, the conformation of fsDNA is changed by the synergistic effect of AgNPs and EBT.     

An iridium(III) complex of oximated 2,2'-bipyridine as a sensitive phosphorescent sensor for hypochlorite

The designed synthesis of a sensitive phosphorescent chemosensor [Ir(ppy)(2)(L1)](PF(6)) (1) (Hppy = 2-phenylpyridine, L1 = 4'-methyl-2,2'-bipyridyl-4-carbaldehyde oxime) was carried out for selective detection of hypochlorite (ClO(-)). Complex 1 is weakly emissive in solution at ambient temperature due likely to rapid isomerization of C=N-OH as an effective non-radiative decay process. When 1 reacts with ClO(-), however, the emission is remarkably enhanced, in which the oxime in L1 is converted to a carboxylic acid in L2 (4'-methyl-2,2'-bipyridine-4-carboxylic acid). The produced complex [Ir(ppy)(2)(L2)](PF(6)) (2) exhibits bright orange-yellow luminescence originating from [5d(Ir) → π*(bpy)] (3)MLCT and [π(ppy) → π*(bpy)] (3)LLCT triplet excited states as suggested from the DFT computational studies. The selective and competitive experiments reveal that complex 1 shows high sensing selectivity and sensitivity for ClO(-) over other reactive oxygen species (ROS) and metal ions.     

LiCoO(2) Concaved Cuboctahedrons from Symmetry-Controlled Topological Reactions

Morphology control of functional materials is generally performed by controlling the growth rates on selected orientations or faces. Here, we control particle morphology by "crystal templating": by choosing appropriate precursor crystals and reaction conditions, we demonstrate that a material with rhombohedral symmetry-namely the layered, positive electrode material, LiCoO(2)-can grow to form a quadruple-twinned crystal with overall cubic symmetry. The twinned crystals show an unusual, concaved-cuboctahedron morphology, with uniform particle sizes of 0.5-2 μm. On the basis of a range of synthetic and analytical experiments, including solid-state NMR, X-ray powder diffraction analysis and HRTEM, we propose that these twinned crystals form via selective dissolution and an ion-exchange reaction accompanied by oxidation of a parent crystal of CoO, a material with cubic symmetry. This template crystal serves to nucleate the growth of four LiCoO(2) twin crystals and to convert a highly anisotropic, layered material into a pseudo-3-dimensional, isotropic material.     

Accessing the long-lived emissive 3IL triplet excited states of coumarin fluorophores by direct cyclometallation and its application for oxygen sensing and upconversion

We studied four cyclometallated Pt(II) complexes, in which the thiazo-coumarin ligands (Pt-2, Pt-3 and Pt-4) or the phenylthiazo ligand (Pt-1) were directly cycloplatinated. Pt-2 shows intense absorption in visible region but other complexes show blue-shifted absorption. Room temperature phosphorescence was observed for all the complexes, and the emission wavelength is dependent on the size of the π-conjugation, not the intramolecular charge transfer (ICT) feature of the C^N ligands. Pt-2 shows longer phosphorescence lifetime (τ = 20.3 μs) than other complexes (below 2.0 μs). Furthermore, Pt-2 shows phosphorescence quantum yield Φ = 0.37, whereas Pt-3 and Pt-4 show much smaller Φ values (0.03 and 0.01, respectively). DFT/TDDFT calculations indicate (3)IL triplet excited states for the complexes. The complexes were used as for luminescence O(2) sensing and triplet-triplet-annihilation (TTA) based upconversion. Stern-Volmer quenching constant K(SV) = 0.026 Torr(-1) was observed for Pt-2, ca. 89-fold of that of Pt-3. TTA upconversion is achieved with Pt-2 (λ(em) = 400 nm with λ(ex) = 473 nm, anti-Stokes shift is 0.47 eV, excitation power density is at 70 mW cm(-2)). The upconversion quantum yield with Pt-2 as triplet sensitizer is up to 15.4%. The TTET efficiency (K(SV) = 1.33 × 10(5) M(-1), k(q) = 6.57 × 10(9) M(-1) s(-1). DPA as quencher) of Pt-2 is 34-fold of the model complex [Ru(dmb)(3)][PF(6)](2). Our results show that the (3)IL state can be readily accessed by direct cyclometallation of organic fluorophores and this approach will be useful for preparation and applications of transition metal complexes that show intense absorption in visible region and the long-lived emissive (3)IL excited states.