Flow Search Approach and New Bounds for the m-Step Linear Conjugate Gradient Algorithm

A flow search approach is presented in this paper. In the approach, each iterative process involves a subproblem, whose variables are the stepsize parameters. Every feasible solution of the subproblem corresponds to some serial search stages, the stepsize parameters in different search stages may interact mutually, and their optimal values are determined by evaluating the total effect of the interaction. The main idea of the flow search approach is illustrated via the minimization of a convex quadratic function. Based on the flow search approach, some properties of the m-step linear conjugate gradient algorithm are analyzed and new bounds on its convergence rate are also presented. Theoretical and numerical results indicate that the new bounds are better than the well-known ones.     

Magnetotransport and magnetic properties of InAs/Mn digital alloys

We have investigated the magnetic and magneto-transport properties of a systematic sequence of five InAs/Mn digital alloys grown by a combination of molecular beam epitaxy and atomic layer epitaxy. The samples consist of 30 periods of Mn fractional monolayers (ML) (0.17–0.5 ML) separated by 14 ML thick InAs spacer layers in a superlattice configuration. Four samples show n-type electrical conduction while the fifth (0.25 ML Mn) is p-type. Squid magnetization measurements performed on these samples show remnant magnetization above room temperature, which is apparently related to a second phase.     

Geometric modeling of homoepitaxial CVD diamond growth: I. The {1 0 0}{1 1 1}{1 1 0}{1 1 3} system

Plasma-assisted CVD homoepitaxial diamond growth is a process that must satisfy many stringent requirements to meet industrial applications, particularly in high-power electronics. Purity control and crystalline quality of the obtained samples are of paramount importance and their optimization is a subject of active research. In the process of such studies, we have obtained high purity CVD diamond monocrystals with unusual morphologies, namely with apparent {1 1 3} stable faces. This phenomenon has led us to examine the process of CVD diamond growth and build up a 3D geometrical model, presented here, describing the film growth as a function of time. The model has been able to successfully describe the morphology of our obtained crystals and can be used as a predictive tool to predetermine the shape and size of a diamond crystal grown in a given process configuration. This renders accessible control of desirable properties such as largest usable diamond surface area and/or film thickness, before the cutting and polishing manufacture steps take place. The two latter steps are more sensitive to the geometry of the growth sectors, which will be addressed in a companion paper.Our model, applicable to the growth of any cubic lattice material, establishes a complete mapping of the final morphology state of growing diamond, as a function of the growth rates of the crystalline planes considered, namely {1 0 0}, {1 1 1}, {1 1 0}, and {1 1 3} planes, all of which have been observed experimentally in diamond films. The model makes no claim as to the stability of the obtained faces, such as the occurrence of non-epitaxial crystallites or twinning. It is also possible to deduce transient behavior of the crystal morphology as growth time is increased. The model conclusions are presented in the form of a series of diagrams, which trace the existence (and dominance) boundaries of each face type, in presence of the others, and where each boundary crossing represent a topology change in terms of number of faces, edges and vertices. We validate the model by matching it against crystals published in the literature and illustrate its predictive value by suggesting ways to increase usable surface area of the diamond film.     

Simultaneous determination of cloramphenicol, salicylic acid and resorcinol by capillary zone electrophoresis and its application to pharmaceutical dosage forms

This study demonstrates the separation of active ingredients in acne formulations (salicylic acid, cloramphenicol and resorcinol in presence of azulene) by capillary zone electrophoresis. Factors affecting their separations were the buffer pH and concentration, applied voltage, sample preparation, and presence of additives. Optimun results were obtained with a 50 mM sodium tetraborate-50 mM sodium phosphate, pH 9.0. The carrier electrolyte gave baseline separation with good resolution, short migration times (<6 min), great reproducibility and accuracy. Calibration plots were linear over at least three orders of magnitude of analyte concentrations, the lower limits of detection being within the range 0.39-1.25 μg ml⁻¹. The procedure was fast and reliable and commercial pharmaceuticals could be analysed without prior sample clean-up procedure.     

Terahertz wave tomographic imaging with a Fresnel lens

We demonstrate three-dimensional tomographic imaging using a Fresnel lens with broadband terahertzpulses.Objects at various locations along the beam propagation path are uniquely imaged on the sameimaging plane using a Fresnel lens with different frequencies of the imaging beam.This procedure allowsthe reconstruction of an object's tomographic contrast image by assembling the frequency-dependentimages.     

Synthesis of poly(arylene disulfide)-vermiculite nanocomposites via in situ ring-opening reaction of cyclic oligomers

An exfoliated poly(4,4^′-oxybis(benzene)disulfide) (POBDS)/vermiculite (VMT) nanocomposite was prepared by using cyclo(4,4^′-oxybis(benzene)disulfide) (COBDS) oligomers and cetyltrimethyl ammonium bromide exchanged VMT. The POBDS/VMT nanocomposites were fabricated in two steps. First, the COBDS oligomers were used to swell and exfoliate organo VMT to afford COBDS-VMT nanocomposite precursor. Subsequently, the exfoliated POBDS-VMT nanocomposite can be made via in situ and instant melt ring-opening polymerization of the COBDS-VMT nanocomposite precursor. High molecular weight POBDS polymer can be formed in a few minutes. The nano scale dispersion of VMT layers within POBDS polymer was confirmed by both the X-ray diffraction patterns and TEM examinations. This methodology provides a potential approach to synthesize high performance polymer nanocomposite.     

A comparison of a theoretical model for quasi-statically and dynamically induced environmental vibration from trains with measurements

This paper presents comparisons between a theoretical ground vibration model and measured data at three sites. The model, which is briefly outlined here, encompasses both the quasi-static and dynamic mechanisms of excitation. The vertical dynamics of a number of vehicles travelling at a constant speed on an infinite track are coupled to a semi-analytical model for a three-dimensional layered ground. This model is also used to demonstrate the roles of the two components of vibration at different frequencies and for train speeds below and above the lowest ground wave speed. It is found that, in most practical cases, the dynamic component gives rise to the higher level of vibration.     

The structure of multi-electrode-pair pulse laser and discharge pulse time selection

Applying multi-electrode-pair pulse TEA CO₂ laser to one optical resonance cavity will have several advantages over traditional method, including higher gain, shorter pulse discharge time interval, and in particular, continuous adjustable time interval of multi-pulse laser output can be achieved without high vacuum condition. To improve laser's working stabilization, we proposed new approaches to optimize laser structure design and discharge pulse time interval selection.     

Active control and a simple estimation method for the onset of Rayleigh-Bénard convection in temperature-dependent-viscosity liquids

Active feedback control for the onset of Rayleigh-Bénard Convection in temperature-dependent-viscosity liquids is investigated. In this paper, three major problems are addressed: (1) The results of Tang-Bau control are improved by considering the effects of temperature-dependent viscosity; (2) A more efficient two-plate control strategy is presented. A phenomenon of coalescence of the unstable modes is observed as the controller gain is large enough; (3) A simple way to estimate the critical Rayleigh number under the effects of temperature-dependent viscosity is described. Numerical results show that the effects of temperature-dependent viscosity on the critical Rayleigh number should be taken into account in some cases and the onset of Rayleigh-Bénard convection can be effectively delayed or advanced by the active feedback control strategies studied here.