Low-temperature destruction of carbon tetrachloride over lanthanide oxide-based catalysts: from destructive adsorption to a catalytic reaction cycle

The catalytic destruction of carbon tetrachloride in the presence of steam, CCl(4) + 2 H(2)O-->4 HCl + CO(2), was investigated at 200-350 degrees C over a series of lanthanide (La, Ce, Pr and Nd) and alkaline-earth metal (Mg, Ca, Sr and Ba) oxide-based catalysts with kinetic experiments, Raman spectroscopy, X-ray photoelectron spectroscopy, IR spectroscopy, X-ray diffraction, and DFT calculations. This new catalytic reaction was achieved by combining destructive adsorption of CCl(4) on a basic oxide surface and concurrent dechlorination of the resulting partially chlorinated solid by steam. The combination of the two noncatalytic reactions into a catalytic cycle provided a rare opportunity in heterogeneous catalysis for studying the nature and extent of surface participation in the overall reaction chemistry. The reaction is proposed to proceed over a terminal lattice oxygen site with stepwise donation of chlorine atoms from the hydrocarbon to the surface and formation of the gas-phase intermediate COCl(2), which is readily readsorbed at the catalyst surface to form CO(2). In a second step, the active catalyst surface is regenerated by steam with formation of gas-phase HCl. Depending on the reaction conditions, the catalytic material was found to transform dynamically from the metal oxide state to the metal oxide chloride or metal chloride state due to the bulk diffusion of oxygen and chlorine atoms. A catalyst obtained from a 10 wt % La(2)O(3)/Al(2)O(3) precursor exhibited the highest destruction rate: 0.289 g CCl(4) h(-1) g(-1) catalyst at 350 degrees C, which is higher than that of any other reported catalyst system.     

Limit of detection estimator for second-order bilinear calibration

A new approach is developed for estimating the limit of detection in second-order bilinear calibration with the generalized rank annihilation method (GRAM). The proposed estimator is based on recently derived expressions for prediction variance and bias. It follows the latest IUPAC recommendations in the sense that it concisely accounts for the probabilities of committing both types I and II errors, i.e. false positive and false negative declarations, respectively. The estimator has been extensively validated with simulated data, yielding promising results.     

Linear dependence in basis-set calculations for extended systems

The problem of linear dependence in basis-set calculations for extended systems is discussed. We show that the problem is intrinsic in three-dimensionally extended systems, but is not as serious in systems with extension in fewer dimensions. The possibility of choosing suitable basis sets that avoid linear dependence is discussed. It is shown that for systems extended in three dimensions in which the orbitals near the Fermi-level are well described by plane waves a mixed atomicorbital/plane-wave (AO –PW ) basis set with tight orbitals to describe the cores avoids the problem in the most efficient way. Numerical experiments with 1s Slater-type orbitals and plane waves on a simple cubic lattice are presented for illustration. © 1992 John Wiley & Sons, Inc.     

Osmium(II)-Phthalocyanine: Darstellung und Eigenschaften von Di(acido)phthalocyaninatoosmaten(II)

Osmium(II) Phthalocyanines: Preparation and Properties of Di(acido)phthalocyaninatoosmates(II) “H[Os(X)₂Pc^2?]” (X = Br, Cl) reacts in basic medium or in the melt with (ⁿBu₄N)X forming less stable, diamagnetic, darkgreen (ⁿBu₄N)₂[Os(X)₂Pc^2?]. Similar dicyano and diimidazolido(Im) complexes are formed by the reaction of “H[Os(Cl)₂Pc^2?]” with excess ligand in the presence of [BH₄]^?. The cyclic voltammograms show up to three quasireversible redoxprocesses: E_1/2(I) = 0.13 V (X = CN), ?0.03 V (Im), ?0.13 V (Br) resp. ?0.18 V (Cl) is metal directed (Os^II/III), E_1/2(II) = 0.69 V (Cl), 0.71 V (Br), 0.83 V (CN), 1.02 V (Im) is ligand directed (Pc^2?/?) and E_1/2(III) = 1.17 V (Cl) resp. 1.23 V (Br) is again metal directed (Os^III/IV). Between the typical “B” (～16.2 kK) and “Q” (～29.4 kK), “N regions” (～34.1 kK) up to seven strong “extra bands” of the phthalocyanine dianion (Pc^2?) are observed in the uv-vis spectrum. Within the row CN > Im > Br > Cl, most of the bands are shifted slightly, the “extra bands” considerably more to lower energy in correlation with E_1/2(I). The vibrational spectra are typical for the Pc^2? ligand with D_4h symmetry. M.i.r. bands at 514, 909, 1 173 and 1 331 cm^?1 are specific for hexa-coordinated low spin Os^II phthalocyanines. In the resonance Raman (r.r.) spectra polarized, depolarized or anomalously polarized deformation and stretching vibrations of the Pc^2? ligand will be selectively enhanced, if the excitation frequency coincides with “extra bands”. With excitation at ～19.5 kK the intensity of the symmetrical Os? X stretching vibration at 295 cm^?1 (X = Cl), 252 cm^?1 (X = Im) and 181 cm^?1 (X = Br) is r.r. enhanced, too. The asymmetrical Os? X stretching vibration is observed in the f.i.r. spectrum at 345 cm^?1 (X = CN), 274 cm^?1 (X = Cl), 261 cm^?1 (X = Im) and 200 cm^?1 (X = Br).     

Direct immobilization of native yeast iso-1 cytochrome C on bare gold: fast electron relay to redox enzymes and zeptomole protein-film voltammetry

Cyclic voltammetry shows that yeast iso-1-cytochrome c (YCC), chemisorbed on a bare gold electrode via Cys102, exhibits fast, reversible interfacial electron transfer (k(0) = 1.8 x 10(3) s(-1)) and retains its native functionality. Vectorially immobilized YCC relays electrons to yeast cytochrome c peroxidase, and to both cytochrome cd(1) nitrite reductase (NIR) and nitric oxide reductase from Paracoccus denitrificans, thereby revealing the mechanistic properties of these enzymes. On a microelectrode, we measured nitrite turnover by approximately 80 zmol (49 000 molecules) of NIR, coadsorbed on 0.65 amol (390 000 molecules) of YCC.     

Aurophilicity-based one-dimensional arrays of gold(I) phenylene-1,3- and -1,4-dithiolates

Phenylene-1,3-dithiol is converted into a trinuclear gold complex by treatment with 1 equiv of [[(Ph(3)P)Au](3)O](+)BF(4)(-). In the product, the phenylene unit bears one gold thiolate and one di(gold)sulfonium function. These components aggregate into one-dimensional arrays through head-to-tail aurophilic contacts between the two functions. In the association process, the Au[bond]S[bond]Au angle of the sulfonium group is opened up to accommodate the incoming gold atom between its metal centers. A similar mode of aggregation is found for the triply aurated biphenylene-4,4'-dithiol obtained using the tri(gold)oxonium salt with tri(p-tolyl)phosphine ligands. Probably for steric reasons, in this oligomerization process, the gold(I) thiolate unit is attached side-on to the digold sulfonium unit with retention of the small Au[bond]S[bond]Au angle. Under similar reaction conditions, and with the same molar ratio of the components, phenylene-1,4-dithiol is converted into the bis-sulfonium salt: 1,4-[[(p-Tol)(3)PAu](2)S](2)C(6)H(4)(BF(4))(2), the dications of which also associate into chains. Along the chains, the phenylene spacers alternate with tetranuclear gold clusters which arise from intimate aggregation of pairs of gold atoms. Together with previous findings, the present results show that gold thiolate (-SAuL) and digold sulfonium functions [-S(AuL)(2)(+)] in proper orientation at an arene unit (alpha-omega) can be considered as "soldering" points which can be used for joining up the molecular units into one-dimensional arrays solely through metal-metal contacts, which appear to be operative even against Coulomb repulsion between cations. The reaction of biphenylene-4,4'-dithiol with 2 equiv of sodium methoxide and [tri(c-hexyl)phosphine]gold chloride gives only neutral digold dithiolate complex 4 which is not associated owing to the steric bulk of the tri(c-hexyl)phosphine ligands.     

Chemistry of phosphine-borane adducts at platinum centers: synthesis and reactivity of PtII complexes with phosphinoborane ligands

Reaction of [Pt(PEt(3))(3)] with the primary and secondary phosphine-borane adducts PhRPH x BH(3) (R=H, Ph) resulted in oxidative addition of a P-H bond at the Pt(0) center to afford the complexes trans-[PtH(PPhR x BH(3))(PEt(3))(2)] (1: R=H; 2: R=Ph). The products 1 and 2 were characterized by (1)H, (11)B, (13)C, (31)P, and (195)Pt NMR spectroscopy, and the molecular structures were verified by X-ray crystallography. In both cases, a trans arrangement of the hydride ligand with respect to the phosphidoborane ligand was observed. When 2 was treated with PhPH(2) x BH(3), a novel phosphidoborane ligand-exchange reaction occurred which yielded 1 and Ph(2)PH x BH(3). Treatment of 2 with one equivalent of depe (depe=1,2-bis(diethylphosphino)ethane) resulted in the formation of the complex cis-[PtH(PPh(2) x BH(3))(depe)] (3), in which the hydride ligand and the phosphidoborane ligand are in a cis arrangement. Treatment of 3 with PhPH(2) x BH(3) was found to result in an exchange of the phosphidoborane ligands to give the complex cis-[PtH(PPhH x BH(3))(depe)] (4) and Ph(2)PH x BH(3). Complex 4 was found to undergo further reaction in the presence of PhPH(2) x BH(3) to give meso-cis-[Pt(PPhH x BH(3))(2)(depe)] (5) and rac-cis-[Pt(PPhH x BH(3))(2)(depe)] (6).     

Asymmetric conjugate addition of thioglycolate to a range of chalcones using tetrahydroisoquinoline (TIQ) N,N′-dioxide ligands

A series of novel TIQ based N,N′-oxide ligands were synthesised and screened for their catalytic activity in the enantioselective conjugate addition of thioglycolate to chalcones. Bulky groups on the side chain of the TIQ backbone provided the highest enantioselectivity of up to 88% with 10 mol % catalyst loading. It was also observed that these reactions proceeded optimally in the presence of dichloromethane as a solvent. Screening of various metals emphasized La(OTf)₃ as the ideal pre-catalyst for this particular reaction.