Equilibrium distribution of permeants in polyelectrolyte microcapsules filled with negatively charged polyelectrolyte: the influence of ionic strength and solvent polarity

The effects of ionic strength and solvent polarity on the equilibrium distribution of fluorescein (FL) and FITC-dextran between the interior of polyelectrolyte multilayer microcapsules filled with negatively charged strong polyelectrolyte and the bulk solution were systematically investigated. A negatively charged strong polyelectrolyte, poly(styrene sulfonate) (PSS), used for CaCO3 core fabrication, was entrapped inside the capsules. Due to the semipermeability of the capsule wall, a Donnan equilibrium between the inner solution within the capsules and the bulk solution was created. The equilibrium distribution of the negatively charged permeants was investigated by means of confocal laser scanning microscopy as a function of ionic strength and solvent polarity. The equilibrium distribution of the negatively charged permeants could be tuned by increasing the bulk ionic strength to decrease the Donnan potential. Decreasing the solvent polarity also could enhance the permeation of FL, which induces a sudden increase of permeation when the ethanol volume fraction was higher than 0.7. This is mainly attributed to the precipitation of PSS. A theoretical model combining the Donnan equilibrium and Manning counterion condensation was employed to discuss the results.     

Thermal behavior of polyelectrolyte multilayer microcapsules: 2. Insight into molecular mechanisms for the PDADMAC/PSS system

Polyelectrolyte multilayer capsules consisting of poly(diallyldimethylammonium chloride) (PDADMAC) and poly(styrene sulfonate) (PSS) were used as a model system to study the temperature-dependent behavior of polyelectrolyte multilayer films in aqueous media. Shells terminated with PSS shrink upon heating, whereas PDADMAC-terminated ones swell, independent of the nature of the first layer, as measured by means of confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Elemental analysis shows that the initial exponential layer growth of the film leads to a nearly neutral overall charge in the first case or a high positive excess charge in the latter. Depending on this overall charge either surface tension, due to an unfavorable polymer-solvent interaction, or electrostatics dominates, resulting in a shrinkage or expansion of capsules, respectively. Thus, it is possible to swell temperature-shrunk capsules by coating them with an additional PDADMAC layer. Micro-DSC measurements prove that polyelectrolyte multilayers undergo a glass transition in water at which the wall material softens, allowing the rearrangements to occur. It is found that the thermal history has an influence on the temperature behavior of capsules, especially on those ones terminated with PDADMAC. Also, the molecular weight of the polyelectrolytes affects the rearrangement of capsules. The lower the molecular weight and thus the smaller the entanglement of chains, the easier polyelectrolytes can rearrange.     

Research reactors as sources of atmospheric radioxenon

Radioxenon emissions of the TRIGA Mark II research reactor in Vienna were investigated with respect to a possible impact on the verification of the Comprehensive Nuclear Test-Ban-Treaty. Using the Swedish Automatic Unit for Noble Gas Acquisition (SAUNA II), five radioxenon isotopes ¹²⁵Xe, ^131mXe, ^133mXe, ¹³³Xe and ¹³⁵Xe were detected, of which ¹²⁵Xe is solely produced by neutron capture in stable atmospheric ¹²⁴Xe and hence acts as an indicator for neutron activation processes. The other nuclides are produced in both fission and neutron capture reactions. The detected activity concentrations ranged from 0.0010 to 190 Bq/m³. The source of the radioxenon is not yet fully clarified, but it could be micro-cracks in the fuel cladding, fission of ²³⁵U contaminations on the outside of the fuel elements or neutron activation of atmospheric Xe. Neutron deficient ¹²⁵Xe with its highly complex decay scheme was seen for the first time in a SAUNA system. In many experiments the activity ratios of the radioxenon nuclides carry the signature of nuclear explosions, if ^131mXe is omitted. Only if ^131mXe is included into the calculations of the isotopic activity ratios, the majority of the measurements revealed a “civil” signature (typical for a NPP). A significant contribution of the TRIGA Vienna to the global or European radioxenon inventory can be excluded. Due to the very low activities, the emissions are far below any concern for human health.     

Encapsulation, release and applications of LbL polyelectrolyte multilayer capsules

Ever since their invention in 1998, polyelectrolyte multilayer micro- and nano-capsules have impacted various areas of biology, chemistry and physics. Here we highlight progress achieved since the millennium in the areas of encapsulation in and release from microcapsules, describe various structures including multicompartment and anisotropic constructs, and provide examples of several applications in biology. We also describe application areas such as drug delivery, intracellular trafficking, enzyme-catalyzed reactions, mechano-biology which benefited from recent developments in the area of polyelectrolyte multilayer capsules.     

Effect of charge order on the plasmon dispersion in transition-metal dichalcogenides

We investigate the dispersion of the charge carrier plasmon in the three prototypical charge-density wave bearing transition-metal dichalcogenides 2H-TaSe(2), 2H-TaS(2), and 2H-NbSe(2) employing electron energy-loss spectroscopy. For all three compounds the plasmon dispersion is found to be negative for small momentum transfers. This is in contrast with the generic behavior observed in simple metals as well as the related system 2H-NbS(2), which does not exhibit charge order. We present a semiclassical Ginzburg-Landau model which accounts for these observations, and argue that the vicinity to a charge ordered state is thus reflected in the properties of the collective excitations.     

Nanoparticle modification by weak polyelectrolytes for pH-sensitive pickering emulsions

The affinity of weak polyelectrolyte coated oxide particles to the oil-water interface can be controlled by the degree of dissociation and the thickness of the weak polyelectrolyte layer. Thereby the oil in water (o/w) emulsification ability of the particles can be enabled. We selected the weak polyacid poly(methacrylic acid sodium salt) and the weak polybase poly(allylamine hydrochloride) for the surface modification of oppositely charged alumina and silica colloids, respectively. The isoelectric point and the pH range of colloidal stability of both particle-polyelectrolyte composites depend on the thickness of the weak polyelectrolyte layer. The pH-dependent wettability of a weak polyelectrolyte-coated oxide surface is characterized by contact angle measurements. The o/w emulsification properties of both particles for the nonpolar oil dodecane and the more polar oil diethylphthalate are investigated by measurements of the droplet size distributions. Highly stable emulsions can be obtained when the degree of dissociation of the weak polyelectrolyte is below 80%. Here the average droplet size depends on the degree of dissociation, and a minimum can be found when 15 to 45% of the monomer units are dissociated. The thickness of the adsorbed polyelectrolyte layer strongly influences the droplet size of dodecane/water emulsion droplets but has a less pronounced impact on the diethylphthalate/water droplets. We explain the dependency of the droplet size on the emulsion pH value and the polyelectrolyte coating thickness with arguments based on the particle-wetting properties, the particle aggregation state, and the oil phase polarity. Cryo-SEM visualization shows that the regularity of the densely packed particles on the oil-water interface correlates with the degree of dissociation of the corresponding polyelectrolyte.     

Electroactive multilayer assemblies of bilirubin oxidase and human cytochrome C mutants: insight in formation and kinetic behavior

Here, we report on cytochrome c/bilirubin oxidase multilayer electrodes with different cytochrome c (cyt c) forms including mutant forms of human cyt c, which exhibit different reaction rates with bilirubin oxidase (BOD) in solution. The multilayer formation via the layer-by-layer technique and the kinetic behavior of the mono (only cyt c) and biprotein (cyt c and BOD) multilayer systems are studied by SPR and cyclic voltammetry. For the layer construction, sulfonated polyaniline is used. The only cyt c containing multilayer electrodes show that the quantity of deposited protein and the kinetic behavior depend on the cyt c form incorporated. In the case of the biprotein multilayer with BOD, it is demonstrated that the catalytic signal chain from the electrode via cyt c to BOD and oxygen can be established with all chosen cyt c forms. However, the magnitude of the catalytic current as well as the kinetic behavior differ significantly. We conclude that the different cytochrome c forms affect three parameters, identified here, to be important for the functionality of the multilayer system: the amount of molecules per layer, which can be immobilized on the electrodes, the cyt c self-exchange rate, and the rate constant for the reaction with BOD.     

Supramolecular Templates for Nanoflake–Metal Surfaces

A sustainable method for the fabrication of metallic surfaces with flower‐like fractal morphology was developed by using a three‐dimensional supramolecular assembly as a template. Modifying Au nanoflakes with self‐assembled monolayers or polymers allows the surface wettability to be adjusted from superhydrophobic to superhydrophilic (see figure). Furthermore, Au nanoflakes present excellent substrates for surface‐enhanced Raman spectroscopy (SERS).

     

Complexes of poly(ethylene oxide)-block-poly(L-glutamate) and diminazene

Nanoparticles with a mean hydrodynamic radius of 16 nm and low polydispersity (P.I. = 0.1) were spontaneously formed by the complexation of poly(ethylene oxide)-block-poly(L-glutamate) (PEO-b-PLGlu) with diminazene. Only one of two possible binding sites of each diminazene molecule was involved in complexation. As determined by UV-vis difference spectra measurements, the complex binding constant is on the order of 1-2 x 10(4) M(-1). Circular dichroism measurements showed that the highly water-soluble diminazene can induce and stabilize the alpha-helical secondary structure of a PLGlu block.