Definitive Proof for the Operation of Isotopically Sensitive Branching (‘Metabolic Switching’) in FeI-Mediated C?H Bond Activation in the Gas Phase Short Communication

Rigorous regio- and stereospecific labeling experiments are performed to demonstrate the operation of the previously suggested operation of ‘isotopically sensitive branching’ in Fe^I-mediated C? H bond activation. For the hexane-1,6-diol/Fe⁺-complex, it is shown that dehydrogenation involves specifically the central C(3)/C(4) position, and the study of the stereospecifically labeled D ,L - and meso-[3,4-D₂]-isotompomers 1e and 1f demonstrates that dehydrogenation proceedes via two competing pathways (i.e. ‘anti’- vs. ‘syn’-route). The contribution of these routes to the product formation is – due to a kinetic isotope effect – controlled by the relative configuration at the labeled positions C(3)/C(4). For the D ,L -form 1e , we estimate a ratio of 49:1 in favor of the ‘anti’-route; due to an isotope effect, this ratio drops to 4.3:1 for the meso-form 1f .     

Synthesen von Xyluron- und Riburonsäurederivaten

Zusammenfassung Durch acylierende Dehydratisierung von 1,2-Isopropyliden-d-xylo-und-d-ribo-pentodialdo-furanoseoxim bzw. aus Furanuronsäureestern und-amiden werden über eine Reihe von Zwischenstufen verschiedene 3-O-Acyl-pentofuranuronsäurenitrile synthetisiert und deren Reaktionen untersucht.

---

Synthesis of xyluronic and riburonic acid derivatives

Various 3-O-acyl-pentofuranurononitrils were synthesized by acylating dehydration of 1,2-isopropylidene-d-xylo- andd-ribo-pentodialdo-furanose oximes, or pentofuranuronic acids via intermediates. Their reactions were investigated.

---

---

Mit 1 Abbildung

---

Aus den DissertationenH. W. Oberwalder (1970) undE. Wildschek (1967), Technische Hochschule in Graz.     

Orientation effects in reactions of allenyl cations with styrene

Allenyl cations, generated $\text{in}$$\text{situ}$ from allenyl or alkynyl halides and Ag⁺, attack styrene at the side chain or at the aromatic nucleus. The allenyl/alkynyl product ratio is dependent on the structure of the precursor halide except for highly substituted systems.     

Amperometric determination of hydrogen peroxide with a manganese dioxide film-modified screen printed carbon electrode

A carbon thick film electrode modified with an MnO₂-film is investigated as an amperometric detector for hydrogen peroxide in flow-injection analysis (FIA). At an operating potential of +0.48 V vs. Ag/AgCl catalytic oxidation of the analyte is exploited for amperometric monitoring. Experimental parameters, such as pH of the carrier, working potential, flow rate and injection volume, are optimized. The amperometric signals are linearly proportional to the concentration of H₂O₂ in the range from 0.005 to 10 mg/L, showing a detection limit (3σ) of 2.3 μg/L. The method is applied to the determination of H₂O₂ in rain water and to a simple assay to quantify glucose in human plasma.     

Tetragonal low-temperature structure of LiAl

The cubic face-centered structure of LiAl (, at ) transforms into a tetragonal body-centered structure (I4₁/amd, , at ). This first-order phase transition at about during heating is probably the reason for the so-called “ anomalies” in some physical properties like specific heat, electrical resistivity and nuclear-spin lattice relaxation. This transition seems to be correlated with the composition Li:Al of the alloy and the amount of Li vacancies.     

PHOTOSENSITIZED REACTIONS OF POLY(U) WITH TRIS(2,2'' BIPYRIDYL)RUTHENIUM(II) AND PEROXYDISULFATE

The reactions of polyuridylic acid [poly(U)] with Ru(bpy)3(3+) [Ru(III)] and SO4.-, following UV and visible light irradiation of Ru(bpy)3(2+) [Ru(II)] in the presence of S2O8(2-), were studied in an argon-saturated aqueous solution using time-resolved absorption and conductivity methods. The kinetics of the Ru(III) conversion to Ru(II) in the presence of poly(U) was monitored spectroscopically either in the absence of SO4.- [rapid mixing with Ru(III)] or in its presence (after laser flash excitation, lambda exc = 353 nm). The conversion of Ru(III) to Ru(II) is complete at a [nucleotide]/[sensitizer] (N/S) ratio greater than or equal to 10 (rate constant k = 12 s-1) for rapid mixing and at N/S greater than or equal to 6 (k = 15 s-1 at N/S = 10) after laser pulsing. Conductivity measurements following the laser pulse revealed a fast conductivity increase (risetime less than 10 micros), due to the formation of charged species and protons. A slower increase in the 0.1-0.5 s range was observed for poly(U) but it is considerably smaller for poly(dU) and absent in uracil containing monounits. The slow increase is unaffected by pH changes in the 3.5-7 range, markedly reduced in the 7-9 range and is replaced by a slight decrease in conductivity in buffered solutions. An explanation is that poly(U)-bound excited Ru(II) reacts with S2O8(2-) forming Ru(III) and SO4.- as oxidizing species both of which react with poly(U) bases. The resulting base radicals react with Ru(III) or the ligands in the ruthenium complex, producing protons which give rise to the slow conductivity increase (k = 15 s-1 at N/S = 10). The formation of single-strand breaks and the ensuing release of condensed counterions does not appear to contribute significantly to the slow conductivity signal. At N/S less than 10 the observed rate and extent of Ru(III)--Ru(II) conversion and of the slow proton production vary markedly with the N/S ratio.     

Electrochemical formation and clevage of bis-imidazolyls

Bis-(2,4,5-triphenylimidazolyls) result from the dimerization of 2,4,5-triphenylimidazolyls and from the nucleophilic attack of 2,4,5-triphenylimidazole anions upon 2,4,5-triphenylimidazolylium cations. The isomeric bis-imidazolyls consist of imidazole and isoimidazole systems. Imidazoles undergo only anodic oxidation, isoimidazoles only cathodic reduction. Therefore the bis-imidazolyls may be analyzed from their electrochemical behaviour. Bis-(2,4,5-triphenylimidazolyl)-1,2′ and bis-(2,4,5-triphenylimidazolyl)-1,4′ undergo reductive bond cleavage in an ē.c?.ē. mechanism from which 2,4,5-triphenyl-imidazole anions result. The electrochemical properties of one of the bis-imidazolyls agree with that of 1,4,5-triphenyl-2-(2,4,5-triphenylisoimidazolyl-4)-imidazole and not with that of bis-(2,4,5-triphenylimidazolyl)-2,4′ as reported in literature.     

Nucleoside 5'-triphosphates: self-association, acid-base, and metal ion-binding properties in solution

Adenosine 5'-triphosphate (ATP(4-)) and related nucleoside 5'-triphosphates (NTP(4-)) serve as substrates in the form of metal ion complexes in enzymic reactions taking part thus in central metabolic processes. With this in mind, the coordination chemistry of NTPs is critically reviewed and the conditions are defined for studies aiming to describe the properties of monomeric complexes because at higher concentrations (>1 mM) self-stacking may take place. The metal ion (M(2+)) complexes of purine-NTPs are more stable than those of pyrimidine-NTPs; this stability enhancement is attributed, in accord with NMR studies, to macrochelate formation of the phosphate-coordinated M(2+) with N7 of the purine residue and the formation degrees of the resulting isomeric complexes are listed. Furthermore, the formation of mixed-ligand complexes (including also those with buffer molecules), the effect of a reduced solvent polarity on complex stability and structure (giving rise to selectivity), the use of nucleotide analogues as antiviral agents, and the effect of metal ions on group transfer reactions are summarized.     

ExplicitN-polynomials of 2-power degree over finite fields,I

For an odd prime powerq the infinite field GF(q ² )= _n0 GF (q ²ⁿ ) is explicitly presented by a sequence (f _n)₁ ofN-polynomials. This means that, for a suitably chosen initial polynomialf ₁, the defining polynomialsf _nGF(q)[x] of degrees2 ⁿ are constructed by iteration of the transformation of variablexx+1/x and have linearly independent roots over GF(q). In addition, the sequences are trace-compatible in the sense that the relative traces map the corresponding roots onto each other. In this first paper the caseq1 (mod 4) is considered and the caseq3 (mod 4) will be dealt with in a second paper. This specific construction solves a problem raised by A. Scheerhorn in [11].