Thermal decomposition of peroxy acetyl nitrate CH3C(O)OONO2

The thermal decomposition of peroxy acetyl nitrate (PAN) is investigated by low pressure flash thermolysis of PAN highly diluted in noble gases and subsequent isolation of the products in noble gas matrices at low temperatures and by density functional computations. The IR spectroscopically observed formation of CH3C(O)OO and H2CCO (ketene) besides NO2, CO2, and HOO implies a unimolecular decay pathway for the thermal decomposition of PAN. The major decomposition reaction of PAN is bond fission of the O-N single bond yielding the peroxy radical. The O-O bond fission pathway is a minor route. In the latter case the primary reaction products undergo secondary reactions whose products are spectroscopically identified. No evidence for rearrangement processes as the formation of methyl nitrate is observed. A detailed mapping of the reaction pathways for primary and secondary reactions using quantum chemical calculations is in good agreement with the experiment and predicts homolytic O-N and O-O bond fissions within the PAN molecule as the lowest energetic primary processes. In addition, the first IR spectroscopic characterization of two rotameric forms for the radical CH3C(O)OO is given.     

Rearrangement reactions of the transient lewis acids (CF(3))(3)B and (CF(3))(3)BCF(2): an experimental and theoretical study

Short-lived (CF(3))(3)B and (CF(3))(3)BCF(2) are generated as intermediates by thermal dissociation of (CF(3))(3)BCO and F(-) abstraction from the weak coordinating anion [B(CF(3))(4)](-), respectively. Both Lewis acids cannot be detected because of their instability with respect to rearrangement reactions at the B-C-F moiety. A cascade of 1,2-fluorine shifts to boron followed by perfluoroalkyl group migrations and also difluorocarbene transfer reactions occur. In the gas phase, (CF(3))(3)B rearranges to a mixture of linear perfluoroalkyldifluoroboranes C(n)()F(2)(n)()(+1)BF(2) (n = 2-7), while the respective reactions of (CF(3))(3)BCF(2) result in a mixture of linear (n = 2-4) and branched monoperfluoroalkyldifluoroboranes, e.g., (C(2)F(5))(CF(3))FCBF(2). For comparison, the reactions of [CF(3)BF(3)](-) and [C(2)F(5)BF(3)](-) with AsF(5) are studied, and the products in the case of [CF(3)BF(3)](-) are BF(3) and C(2)F(5)BF(2) whereas in the case of [C(2)F(5)BF(3)](-), C(2)F(5)BF(2) is the sole product. In contrast to reports in the literature, it is found that CF(3)BF(2) is too unstable at room temperature to be detected. The decomposition of (CF(3))(3)BCO in anhydrous HF leads to a mixture of the new conjugate Br?nsted-Lewis acids [H(2)F][(CF(3))(3)BF] and [H(2)F][C(2)F(5)BF(3)]. All reactions are modeled by density functional calculations. The energy barriers of the transition states are low in agreement with the experimental results that (CF(3))(3)B and (CF(3))(3)BCF(2) are short-lived intermediates. Since CF(2) complexes are key intermediates in the rearrangement reactions of (CF(3))(3)B and (CF(3))(3)BCF(2), CF(2) affinities of some perfluoroalkylfluoroboranes are presented. CF(2) affinities are compared to CO and F(-) affinities of selected boranes showing a trend in Lewis acidity, and its influence on the stability of the complexes is discussed. Fluoride ion affinities are calculated for a variety of different fluoroboranes, including perfluorocarboranes, and compared to those of the title compounds.     

1H-NMR-spektroskopische Analyse von 2-Chlor-1.3.2-dioxarsolan

The¹H-NMR-spectral data of 2-chloro-1.3.2-dioxarsolane are presented and discussed. The protons of the methylene groups form in concentrated solutions by rapide chlorine exchange anAAAA spin system. In dilute solutions the protons form anAABB spin system, which is changed to anAAAA system by addition of chlorine ions.The vicinal H–C–C–H-coupling constants indicate a twist-envelope conformation.

---

---

Mit 1 Abbildung     

Color Bricks: Building Highly Organized and Strongly Absorbing Multicomponent Arrays of Terpyridyl Perylenes on Metal Oxide Surfaces

Terpyridine‐substituted perylenes containing cyclic anhydrides in the peri position were synthesized. The anhydride group served as an anchor for assembly of the terpyridyl‐crowned chromophores as monomolecular layers on metal oxide surfaces. Further coordination with Zn²⁺ ions allowed for layer‐by‐layer formation of supramolecular assemblies of perylene imides on the solid substrates. With properly selected anchor and linker molecules it was possible to build high quality structures of greater than ten successive layers by a simple and straightforward procedure. The prepared films were stable and had a broad spectral coverage and high absorbance. To demonstrate their potential use, the synthesized dyes were employed in solid‐state dye‐sensitized solar cells, and electron injection from the perylene antennas to titanium dioxide was observed.     

Fabrication of three-dimensional photonic crystals with tunable photonic properties by biotemplating

Photonic crystals with tunable D-surface structures for possible high-temperature gas- and temperature-sensing applications were prepared by a biotemplating method. This included infiltrating colored scales of the beetle Entimus imperialis with an organopolysiloxane mixture followed by simultaneous combustion of the template and calcination of the cured organopolysiloxane. A high-yield inorganic silica-based replica of the original structure was obtained, which is capable of withstanding temperatures up to 600 °C. Light- and scanning electron microscopy combined with focused ion beam milling showed a precise replication of the whole scales and their internal D-surface structure. Fourier-transform infrared spectroscopy and X-ray diffraction analysis confirmed the complete curing of the organopolysiloxanes and their transformation into amorphous silica during calcination. The dielectric constant of the manufactured materials determined by Abbé refractometry was ? = 2.3180 and used to perform band structure calculations utilizing the plane wave expansion method. By changing the chain length and degree of crosslinking of the organopolysiloxane precursor mixture, the lattice parameters and filling factors, and therefore the photonic properties of the replicas, could be tuned.     

An Anthracene-Based Metal-Organic Framework for Selective Photo-Reduction of Carbon Dioxide to Formic Acid Coupled with Water Oxidation

A Zr-based metal-organic framework has been synthesized and employed as a catalyst for photochemical carbon dioxide reduction coupled with water oxidation. The catalyst shows significant carbon dioxide reduction property with concomitant water oxidation. The catalyst has broad visible light as well as UV light absorption property, which is further confirmed from electronic absorption spectroscopy. Formic acid was the only reduced product from carbon dioxide with a turn-over frequency (TOF) of 0.69 h⁻¹ in addition to oxygen, which was produced with a TOF of 0.54 h⁻¹. No external photosensitizer is used and the ligand itself acts as the light harvester. The efficient and selective photochemical carbon dioxide reduction to formic acid with concomitant water oxidation using Zr-based MOF as catalyst is thus demonstrated here.     

Concentration of Eigenvalues for Skew-Shift Schr?dinger Operators

I analyze the microscopic behavior of the eigenvalues of skew-shift Schr?dinger operators, and show that their statistics must resemble the one of the Anderson model rather than the one of quasi-periodic Schr?dinger operators.     

Direct Evidence of Significantly Different Chemical Behavior and Excited‐State Dynamics of 1,7‐ and 1,6‐Regioisomers of Pyrrolidinyl‐Substituted Perylene Diimide

Novel bay‐functionalized perylene diimides with additional substitution sites close to the perylene core have been prepared by the reaction between 1,7(6)‐dibromoperylene diimide 6 (dibromo‐PDI) and 2‐(benzyloxymethyl)pyrrolidine 5 . Distinct differences in the chemical behaviors of the 1,7‐ and 1,6‐regioisomers have been discerned. While the 1,6‐dibromo‐PDI produced the corresponding 1,6‐bis‐substituted derivative more efficiently, the 1,7‐dibromo‐PDI underwent predominant mono‐debromination, yielding a mono‐substituted PDI along with a small amount of the corresponding 1,7‐bis‐substituted compound. By varying the reaction conditions, a controlled stepwise bis‐substitution of the bromo substituents was also achieved, allowing the direct synthesis of asymmetrical 1,6‐ and 1,7‐PDIs. The compounds were isolated as individual regioisomers. Fullerene (C₆₀) was then covalently linked at the bay region of the newly prepared PDIs. In this way, two separate sets of perylene diimide–fullerene dyads, namely single‐bridged (SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀) and double‐bridged (DB‐1,7‐PDI‐C₆₀ and DB‐1,6‐PDI‐C₆₀), were synthesized. The fullerene was intentionally attached at the bay region of the PDI to achieve close proximity of the two chromophores and to ensure an efficient photoinduced electron transfer. A detailed study of the photodynamics has revealed that photoinduced electron transfer from the perylene diimide chromophore to the fullerene occurs in all four dyads in polar benzonitrile, and also occurs in the single‐bridged dyads in nonpolar toluene. The process was found to be substantially faster and more efficient in the dyads containing the 1,7‐regioisomer, both for the singly‐ and double‐bridged molecules. In the case of the single‐bridged dyads, SB‐1,7‐PDI‐C₆₀ and SB‐1,6‐PDI‐C₆₀, different relaxation pathways of their charge‐separated states have been discovered. To the best of our knowledge, this is the first observation of photoinduced electron transfer in PDI‐C₆₀ dyads in a nonpolar medium.