Polypropylene/Cellulosic Fiber Composites Chemical Treatment of the Cellulose Assuming Compatibilization Between the Two Materials

Abstract

The present work deals with the realization of composites with a polypropylene (PP) matrix and cellulosic fibers as reinforcement. In order to achieve a good adhesion with the PP matrix, the modification of different cellulosic fibers has been performed with various chemical functions: carboxylic anhydrides, isocyanates, vinylsulfone, and chlorotriazine systems. All these compatibilizing agents carry an alkyl chain or a PP chain. Grafting is evidenced by infrared and ESCA spectroscopies, and the grafting rates for the different chemicals are determined by microweighing measurements. Modification of the surface characteristics is followed by wettability tests and inverse gas chromatography. Determination of the water sorption isotherm for the treated fibers shows an important decrease in water regain in the case of isocyanate treatments in swelling medium. Enhancement of adhesion between fibers and the matrix is demonstrated by mechanical tests: the interfacial shear stress obtained by the microbond test increases by 70% for cellulosic fibers treated with maleated PP. This may be the result of entanglements between PP chains, but for macrocomposites the effect is much more limited due to the predominance of external factors during development of the composite.     

Development and characterization of a small electromembrane extraction probe coupled with mass spectrometry for real-time and online monitoring of in vitro drug metabolism

A small and very simple electromembrane extraction probe (EME-probe) was developed and coupled directly to electrospray ionization mass spectrometry (ESI-MS), and this system was used to monitor in real time in vitro metabolism by rat liver microsomes of drug substances from a small reaction (incubation) chamber (37 °C). The drug-related substances were continuously extracted from the 1.0 mL metabolic reaction mixture and into the EME-probe by an electrical potential of 2.5 V. The extraction probe consisted of a 1-mm long and 350-μm ID thin supported liquid membrane (SLM) of 2-nitrophenyl octyl ether. The drugs and formed metabolites where extracted through the SLM and directly into a 3 μL min^?1 flow of 60 mM HCOOH inside the probe serving as the acceptor solution. The acceptor solution was directed into the ESI-MS-system, and the MS continuously monitored the drug-related substances extracted by the EME-probe. The extraction efficiency of the EME-probe was dependant on the applied electrical potential and the length of the SLM, and these parameters as well as the volume of the reaction chamber were set to the values mentioned above to avoid serious depletion from the reaction chamber (soft extraction). Soft extraction was mandatory in order not to affect the reaction kinetics by sample composition changes induced by the EME-probe. The EME-probe/MS-system was used to establish kinetic profiles for the in vitro metabolism of promethazine, amitriptyline and imipramine as model substances.     

Structure‐Based Design of Inhibitors of the Aspartic Protease Endothiapepsin by Exploiting Dynamic Combinatorial Chemistry

Structure‐based design (SBD) can be used for the design and/or optimization of new inhibitors for a biological target. Whereas de novo SBD is rarely used, most reports on SBD are dealing with the optimization of an initial hit. Dynamic combinatorial chemistry (DCC) has emerged as a powerful strategy to identify bioactive ligands given that it enables the target to direct the synthesis of its strongest binder. We have designed a library of potential inhibitors (acylhydrazones) generated from five aldehydes and five hydrazides and used DCC to identify the best binder(s). After addition of the aspartic protease endothiapepsin, we characterized the protein‐bound library member(s) by saturation‐transfer difference NMR spectroscopy. Cocrystallization experiments validated the predicted binding mode of the two most potent inhibitors, thus demonstrating that the combination of de novo SBD and DCC constitutes an efficient starting point for hit identification and optimization.     

Seeding Molecular Rotators on a Passivated Silicon Surface

Thermally activated rotation of single molecules adsorbed on a silicon‐based surface between 77 and 150 K has been successfully achieved. This remarkable phenomenon relies on a nanoporous supramolecular network, which acts as a template to seed periodic molecule rotors on the surface. Thermal activation of rotation has been demonstrated by STM experiments and confirmed by theoretical calculations.     

Development of ion-conducting polymer electrolytes for use in high-energy lithium rechargeable batteries

Polymers based on poly(thylene oxide) (PEO) are a very promising new type of stable electrolytes for lithium rechargeable batteries. Their relatively low ionic conductivities can be more than compensated by the very small electrolyte thicknesses that can be used. Specific energies of 100 Wh/kg at sustained specific powers of 70 W/kg, have been obtained at Hydro-Québec with 100 μm of PEO electrolyte at 100°C. In an electric vehicle, this would give a driving range of over 300 km at 80 km/h, more than three times as much as lead-acid batteries. PEO-related polymers have been developed for lower temperature applications such as computers or portable appliances. Advantages over competitive Ni-Cd batteries are higher energy densities and absence of self-discharge, with expected shell lifes of 10 years. Laboratory prototypes (3600 cm², 10 Wh) demonstrate the absence of scale-up effects and excellent cycling capability (over 300 charge-discharge cycles).     

STM images of a large organic molecule adsorbed on a bare metal substrate or on a thin insulating layer: Visualization of HOMO and LUMO

An isomer of the methylterrylene molecule was adsorbed both on Cu(111) and on a NaCl bilayer deposited on Cu(111) and imaged by ultra high vacuum scanning tunneling microscopy at low temperature (5 K). On the bare metal surface, the STM images do not reveal any intramolecular resolution and do not depend on the applied tunnel bias. On the contrary, the images acquired at specific bias voltages for the molecule on the salt layer show a striking similarity with the spatial distribution of the electronic probability density in the highest occupied molecular orbital (HOMO) and in the lowest unoccupied molecular orbital (LUMO) of free methylterrylene. They are well reproduced by elastic scattering quantum chemistry calculations. These data provide a direct view of the hyperconjugative interaction between the methyl group and the frontier orbitals of terrylene.     

A data-driven,high-throughput methodology to determine tissue-specific differentially methylated regions able to discriminate body fluids

Tissue-specific differentially methylated regions (tDMRs) are regions of the genome with methylation patterns that modulate gene expression in those tissue types. The detection of tDMRs in forensic evidence can permit the identification of body fluids at trace levels. In this report, we have performed a bioinformatic analysis of an existing array dataset to determine if new tDMRs could be identified for use in body fluid identification from forensic evidence. Once these sites were identified, primers were designed and bisulfite modification was performed. The relative methylation level for each body fluid at a given locus was then determined using qPCR with high-resolution melt analysis (HRM). After screening 127 tDMR's in multiple body fluids, we were able to identify four new markers able to discriminate blood (2 markers), vaginal epithelia (1 marker) and buccal cells (1 marker). One marker for each target body fluid was also tested with pyrosequencing showing results consistent with those obtained by HRM. This work successfully demonstrates the ability of in silico analysis to develop a novel set of tDMRs capable of being differentiated by real time PCR/HRM. The method can rapidly determine the body fluids left at crime scenes, assisting the triers of fact in forensic casework.