Determination of per- and polyfluorinated substances in airborne particulate matter by microwave-assisted extraction and liquid chromatography-tandem mass spectrometry

A sensitive and confirmatory analytical method has been developed for the determination of 12 ionic per- and polyfluorinated alkyl substances (PFAS) in fine airborne particulate matter (PM2.5) at trace levels. The proposed method includes extraction of PM2.5-bound PFAS by microwave-assisted extraction (MAE) followed by centrifugation and injection into the liquid chromatograph coupled to a triple quadrupole tandem mass spectrometry system (LC-MS/MS). The main parameters affecting the performance of MAE were optimised using statistical design of experiments (DoE). Recoveries ranged from 83 to 120% and the method quantification limit (MQL) was 1.4 pg m(-3), when air volumes of 720 m(3) were sampled. This method was successfully applied to 41 samples collected from five stations of the monitoring network of the Valencian Regional Government (Spain) during April-July 2010. Eight out of 12 PFCs investigated were quantified in at least one sample (PFBA, PFPeA, PFHxS, 6:2 FTS, PFOA, PFNA, PFOS and PFDA). The measured concentrations ranged from 1.4 to 34.3 pg m(-3).     

The molecular structure of 2-methylbenzotriazole (2MeBzTr) in connection with the x-ray structure of 2MeBzTr.HBF4.H2O

The fluoroborate of 1H-2-methylbenzotriazolium monohydrate crystallizes in the Pbca space group [Z = 8, a = 16.734(3), b = 19.153(9), c = 6.937(1) Å], The hydrogen bond network between the three molecules, 2MeBzTr, HBF₄ and H₂O, corresponds to a situation intermediate between the fluoroborate of a protonated benzotriazole (BF4^?.2MeBzTrH⁺) and a neutral benzotriazole hydrogen-bonded to fluoroboric acid (HBF₄,2MeBzTr). The behaviour of the title compound in solution is also intermediate between these two extreme situations. Thus, the present compound is one of the rare examples of a proton solvated only by very weak hydrogen bond acceptors.     

A Comparative Study of Naproxen – Beta Cyclodextrin Complexes Prepared by Conventional Methods and Using Supercritical Carbon Dioxide

Naproxen is a poorly soluble anti-inflammatorydrug, the solubility of which canbe enhanced by complexation withbeta-cyclodextrin. Besides that, the inclusioncomplex reduces the incidence of gastrointestinal side effects of the drug. The aim of this work was to compare the physicochemical characteristics of the solid complexes prepared by traditional methods (kneading, freeze-drying and spray-drying) and using a supercritical fluid technology. The unusual solvent properties of carbon dioxide above their critical temperature and pressure were exploited in order to prepare inclusion compounds. Complexes prepared using supercritical fluid technology showed similar properties to those of freeze-drying andspray-drying complexes as proved by DSC, FT-IRand UV.     

Studies of the soluble part of oxidised coals

Soluble products obtained from the oxidation of four types of coal, each characterised by different degree of coalification and different degree of sulphur content, are studied. The coals are oxidised with peracetic acid (PAA) and nitric acid. Analyses are performed by Atmospheric Pressure-Temperature Programmed Reduction (AP-TPR) and Fourier Transform Infrared Spectroscopy (FTIR). The soluble products contain much more sulphur than the insoluble products of oxidation. The products obtained from the reaction with HNO₃ contain higher amounts of inorganic sulphur compounds, while those obtained from the reaction with PAA are characterised by an increased content of organic sulphur species.     

Studies on diastereoselective reduction of cyclic β-ketoesters with boron hydrides. Part 4: The reductive profile of functionalized cyclohexanone derivatives

Reduction of 2-allyl-2-carboalkoxycyclohexanones (3d-f), 2-propyl-2-carboethoxycyclohexanone (3g) and 2-benzyl-2-carboethoxycyclohexanone (3h) with boron hydrides in the presence and absence of several chelating agents were studied. Molecular modeling studies using semiempirical PM3 method were performed in order to find a suitable explanation of the diastereoselection of ketone carbonyl faces during the reductive process, which yielded trans-2-allyl-2-carboethoxycyclohexanol (6e) and cis-2-allyl-2-carboethoxycyclohexanol (7e) in good diastereomeric excess by using inexpensive sodium and tetrabutylammonium borohydrides.     

Optimisation of Supercritical Carbon Dioxide Systems for Complexation of Naproxen : Beta-Cyclodextrin

Supercritical carbon dioxide (scCO₂)offers several attractive scenarios for thepharmaceutical processing as an alternativeto aqueous and organic solvents. In thiswork naproxen, a widely used non steroidalanti-inflammatory drug with analgesic andanti-inflammatory properties, was chosenas a model drug. Its complexation with cyclodextrinsimproves the rate and extent of dissolutionof the drug, increase its rate of absorption and mayreduce the unpleasant side-effects of the drug.The interest in using this supercritical technologyled us to develop an experimental unit for the useof supercritical CO₂ as a processing medium forthe complexation of naproxen with beta cyclodextrin (CD).     

Uronic (hexenuronic) acid profile of ethanol–alkali delignification of giant reed Arundo donax L.

The effect of process variables on uronic acids (UAs) and hexenuronic acids (HexAs) in the annual crop Arundo donax L. during ethanol–alkali pulping has been examined. A substantial loss of UA moieties (up to 90%) was observed by the end of pulping (target kappa number 18) performed with 25% NaOH and 40% EtOH (by volume) within the temperature range of 130–150 °C. At the same time, the progressive formation of HexA in pulp was detected from the early phases of delignification. The proportion of HexA in the residual UA of the final pulp was found to be 84%, indicating almost complete conversion of 4-O-methylglucuronic acid side groups (MeGlcA) of heteroxylan into HexA. The kinetics of UA degradation and HexA formation has been described in terms of three consecutive first-order reaction stages. The overall rate of UA degradation was one order higher than the rate of UA conversion into HexA. The values of apparent activation energy were estimated as 68.6 and 94.7 kJ mol^–1, respectively. The reaction medium alkalinity was shown to be the controlling factor for UA and HexA stability during ethanol–alkali pulping. An increase in alkali charge from 5% to 35% (as NaOH) led to UA loss of 40%, but promoted HexA formation from 11.8 to 20.1 mol g^–1. The addition of organic solvent to the alkaline pulping solution had a similar effect, and about 10% of UA was lost and the content of HexA increased from 6.9 to 10.9 mol g^–1 with an increase in ethanol proportion in the liquor from 20% to 60%.     

A convenient purification and preconcentration of peptides with α‐cyano‐4‐hydroxycinnamic acid matrix crystals in a pipette tip for matrix‐assisted laser desorption/ionization mass spectrometry

Peptide samples derived from enzymatic in‐gel digestion of proteins resolved by gel electrophoresis often contain high amount of salts originating from reaction and separation buffers. Different methods are used for desalting prior to matrix‐assisted laser desorption/ionization (MALDI) mass spectrometry (MS), e.g. reversed‐phase pipette tip purification, on‐target washing, adding co‐matrices, etc. As a suitable matrix for MALDI MS of peptides, α‐cyano‐4‐hydroxycinnamic acid (CHCA) is frequently used. Crystalline CHCA shows the ability to bind peptides on its surface and because it is almost insoluble in acidic water solutions, the on‐target washing of peptide samples can significantly improve MALDI MS signals. Although the common on‐target washing represents a simple, cheap and fast procedure, only a small portion of the available peptide solution is efficiently used for the subsequent MS analysis. The present approach is a combination of the on‐target washing principle carried out in a narrow‐end pipette tip (e.g. GELoader tip) and preconcentration of peptides from acidified solution by passing it through small CHCA crystals captured inside the tip on a glass microfiber frit. The results of MALDI MS analysis using CHCA‐tip peptide preconcentration are comparable with the use of homemade POROS R2 pipette tip microcolumns. Advantages and limitations of this approach are discussed. Copyright © 2009 John Wiley & Sons, Ltd.     

Wavelength encoded analytical imaging and fiber optic sensing with pH sensitive CdTe quantum dots

CdTe quantum dots (QDs), capped with mercaptopropionic acid (MPA), were synthesized and the variation of their fluorescence properties (steady state and lifetime) with pH was assessed in solution and when immobilized in a sol-gel host. Three different sizes of CdTe QDs with excited state lifetimes ranging from 42 to 48 ns and with emission maximum at 540 nm (QD₅₄₀), 580 nm (QD₅₈₀) and 625 nm (QD₆₂₅) were selected. The solution pH affects the maximum emission wavelength (shifts to higher wavelengths of 23, 24 and 27 nm for QD₅₄₀, QD₅₈₀ and QD₆₂₅, respectively), the excited state lifetime and the fluorescence intensity in a reversible way. Linearization of the maximum emission wavelength variation with the pH allows the estimation of an apparent ionization constant (pK_a) for each QD: 6.5 ± 0.1 (QD₅₄₀), 6.1 ± 0.5 (QD₅₈₀) and 5.4 ± 0.3 (QD₆₂₅). The variation of the QDs fluorescence properties was further explored using confocal laser scanning microscopy allowing the implementation of a new calibration method for pH imaging in solution. QDs were successfully immobilized on the tip of an optical fiber by dip-coating using sol-gel procedure. The immobilized QDs showed a similar pH behaviour to the one observed in solution and an apparent lifetime of 80, 68 and 99 ns, respectively. The proposed QDs based methodology can be successfully used to monitor pH using wavelength encoded data in imaging and fiber optic sensing applications.     

Radiation processing of natural polymers: The IAEA contribution

Radiation processing offers a clean and additive-free method for preparation of value-added novel materials based on renewable, non-toxic, and biodegradable natural polymers. Crosslinked natural polymers can be used as hydrogel wound dressings, face cleaning cosmetic masks, adsorbents of toxins, and non-bedsore mats; while low molecular weight products show antibiotic, antioxidant, and plant-growth promoting properties. Recognizing the potential benefits that radiation technology can offer for processing of natural polymers into useful products, the IAEA implemented a coordinated research project (CRP) on “Development of Radiation-processed products of Natural Polymers for application in Agriculture, Healthcare, Industry and Environment”. This CRP was launched at the end of 2007 with participation of 16 MS to help connecting radiation technology and end-users to derive enhanced benefits from these new value-added products of radiation-processed natural materials. In this paper the results of activities in participating MS related to this work will be presented.