The level structure of92Ru up to high spin values

The level structure of⁹²Ru has been studied by means of γ-ray spectroscopy. The nucleus was produced by the⁵⁸Ni(⁴⁰Ca, α2p)⁹²Ru reaction at beam energies of 147 and 187 MeV. The NORDBALL detector system including particle selection was used. A large number of new levels with excitation energies up to 11.3 MeV and spin values up to 22 or 23 units of angular momentum have been established. The level scheme is compared with recent shell model calculations using¹⁰⁰Sn as a core. Some systematics of the g ₉ ^2/?2 configuration is discussed and a strong correlation between the levels in⁹⁰Mo and⁹²Ru is found.     

Syntheses of Theaspirone and Vitispirane via Palladium(II)-Catalyzed Oxaspirocyclization

Total syntheses of theaspirone (A and B) and vitispirane (A and B) are described. The key step in the syntheses is the palladium(II)-catalyzed intramolecular oxaspirocyclization of diene alcohol 4 to either vitispirane or the allylic alcohol 9. The outcome of the oxaspirocyclization is very much dependent on the solvent employed. In water-acetic acid (4:1) a 1:1 mixture of the diastereomeric alcohols 9A and 9B was exclusively formed. In water with 8 equiv of a strong non-nucleophilic acid, vitispiranes A and B (1:1) were obtained. An alternative procedure to obtain vitispirane with the use of LiCl and K(2)CO(3) is described. In the latter reaction vitispirane B is formed preferentially. This result is explained by an equilibrium between the two possible pi-allyl complexes 5A and 5B, the kinetically favored 5B being transformed into vitispirane 3B before isomerization to 5A occurs.     

Flow-through microdispenser for interfacing micro-HPLC to Raman and mid-IR spectroscopic detection

A flow-through microdispenser has been coupled to a micro HPLC separation system and used as a solvent elimination interface for Fourier transform infrared (FTIR) and Raman spectroscopic detection of the separated compounds. Using the microdispenser picoliter sized droplets can be generated and deposited on an appropriate target placed on a computerized x, y-stage. Evaporation of volatile solvent and buffer is rapid and allows analysis of the obtained dry deposits by various techniques. Due to the destruction free character of Raman and FTIR spectroscopy they can be applied sequentially to interrogate the same deposit. In the reported application five phenolic acids typically present in wine have been separated on a C-18 column technique using a mixture of water, methanol and acetic acid as mobile phase. For spectrum acquisition infrared and Raman microscopes have been used. The spectra recorded from the dried deposits of the separated compounds agreed well with the reference spectra of corresponding components.     

Comparison of denuder and impinger sampling for determination of gaseous toluene diisocyanate (TDI)

An air-sampling method employing denuders coated inside with a chemisorptive stationary phase has been evaluated for analysis of the hazardous gaseous 2,4 and 2,6 isomers of toluene diisocyanate (TDI). The denuder stationary phase consisted of polydimethylsiloxane (SE-30) to which dibutylamine (DBA) was added as a reagent for derivatization of TDI. The accuracy and precision of sampling by means of denuders were shown to differ only slightly from those of the established impinger method. The denuder method was, however, also shown to be suitable for long-term measurements (up to 8 h). The limit of determination (LOD) of the method, including LC-APCI-MS-MS analysis, was found to be 1.9 microg m(-3) and 1.2 microg m(-3) for 2,4- and 2,6-TDI, respectively, for short-term measurements (15 min). Significant lower LOD was obtained for long-term measurements. This is well below the Occupational Safety and Health Administration (OSHA) 8-h TWA (time-weighted average) exposure limit, which is 40 microg m(-3) for the sum of the TDI isomers. The denuder method was also found to be robust and easy to handle. The samplers can be prepared several days before sampling with no loss in performance. The contents of denuders should, on the other hand, be extracted immediately after sampling to prevent degradation of the isocyanate derivatives formed.     

Comparison of different strains of the yeastYarrowia lipolytica for citric acid production from glucose hydrol

Four commercial strains and two mutants of the yeast species Yarrowia lipolytica were screened using batch fermentation. Strain Y. lipolytica A-101-1.14 (induced with UV irradiation) was found to be the most suitable for citric acid production from glucose hydrol (39.9% glucose and 2.1% other sugars), a byproduct of glucose production from potato starch. The specific rate of total citric and isocitric acid production was 0.138 g/g.h, the yield on consumed glucose 0.93 g/g, and the productivity achieved was as high as 1.25 g/L.h. All of the tested yeast strains were able to utilize only the glucose from the glucose hydrol medium. Thus, some residual higher oligosaccharides remained in the process effluent.     

Study of cork (from Quercus suber L.)-wine model interactions based on voltammetric multivariate analysis

The cork from Quercus suber L. is the premium raw material used to produce wine-bottling stoppers; however, being a natural product, cork can be contaminated and attacked in different ways that could promote differences in its proprieties. A specific contamination is the defect known in the industry as “Mancha Amarela—Yellow spot” (MA). This cork shows modifications in its mechanical, structural and optical properties and is potentially able to cause off-flavours in wine. In this study, a new analytical approach is proposed for the rapid screening of cork-wine model interactions in order to determine if the cork were able to contaminate a wine. Cork samples classified as standard (S) and cork MA were put in contact with a wine model matrix. The model matrix was analysed by cyclic voltammetry and square wave voltammetry in function of different contact times. Considering that matrices in contact with cork S and MA exhibited different pH, the influence of this parameter on the distinction power was also evaluated. The data sets obtained from the different techniques were treated by principal component analysis (PCA) and PLS_Cluster. The major difference between samples S and MA is the occurrence of an important peak at ca. 580 mV in the MA voltammograms. This more positive peak may be assigned to lignin related phenolics; therefore, it can be proposed as a possible marker to follow lignin degradation.     

Sensitive spectrophotometric determination of gallium with eriochrome Cyanine R and cetyltrimethylammonium ions

Summary A new sensitive, spectrophotometric determination of gallium, based on the ternary gallium-Eriochrome Cyanine R-cetyltrimethylammonium system has been developed. At _max=588 nm the molar absorptivity is 1.20×10⁵l·mole^–1·cm^–1. The maximum absorbance is attained in 5 min in the presence of a 10-fold molar ratio of Eriochrome Cyanine R and an approx. 50-fold ratio of cetyltrimethylammonium bromide (to Ga). Citrate, EDTA and to a lesser extent tartrate, interfere. Interference by metals can be eliminated by a preliminary extraction of gallium with di-isopropyl ether from 7 M hydrochloric acid in the presence of ascorbic acid as reductant. The results for gallium (at a concentration level of 1×10^–4%) in aluminium metal and chloride indicate good precision and accuracy.

---

Empfindliche spektrophotometrische Bestimmung von Gallium mit Eriochromcyanin-R- und Cetyltrimethylammonium-Ionen

Zusammenfassung Ein neues, empfindliches spektrophotometrisches Verfahren zur Galliumbestimmung wurde ausgearbeitet. Es beruht auf der Verwendung des ternären Systems Gallium — EriochromcyaninR — Cetyltrimethylammonium. Bei _max=588 nm beträgt die molare Extinktion 1,20·10⁵ 1·Mol^–1·cm^–1. Die maximale Absorption wird innerhalb von 5 min bei Gegenwart der 10fachen molaren Menge EriochromcyaninR und der etwa 50fachen Menge Cetyltrimethylammoniumbromid erreicht. Citrat, ÄDTA und in geringerem Maß Tartrat stören. Störende Wirkung durch Metalle kann durch vorhergehende Extraktion des Galliums mit Diisopropyläther aus 7 M Salzsäure in Gegenwart von Askorbinsäure als Reduktionsmittel vermieden werden. Die Ergebnisse (im Konzentrationsbereich von 10^–4% Ga) in metallischem Aluminium und AICI₃ sind genau.

     

Regio- and Stereoselective Reactions of 17-Phenyl-18,19,20-trinorprostaglandin F(2)(alpha) Isopropyl Ester

Novel prostaglandin F(2)(alpha) derivatives, functionalized at C13 and C14, have been prepared. 17-Phenyl-18,19,20-trinorprostaglandin F(2)(alpha) isopropyl ester [(15S)-1] and its epimer [(15R)-1] were stereoselectively epoxidized, using Sharpless conditions, to produce each of the four diastereomeric epoxides (15S)-2, (15S)-3, (15R)-2, and (15R)-3. Treatment of the four epoxides with LiOH stereospecifically-produced the pentahydroxy substituted analogues 12 and 13. Alternatively, epoxides 2 and 3were allowed to react with thiophenolate ion. The attack of the sulfur nucleophile on the epoxide occurred at either C13 or C14 depending on the stereochemistry of the epoxide and of C15.