An environmentally friendly reflectometric method for ranitidine determination in pharmaceuticals and human urine

This paper describes an environmentally friendly method for quantitative determination of ranitidine using diffuse reflectance spectroscopy. This method is based on the reflectance measurements of the colored product produced from the spot test reaction between ranitidine and p-dimethylaminocinnamaldehyde (p-DAC), in acid medium, using filter paper as solid support. Experimental design methodologies were used to optimize the optimal conditions. All reflectance measurements were carried out at 590 nm and the linear range was from 1.42x10(-3) to 3.42x10(-2) mol L(-1), with a correlation coefficient of 0.997. The limit of detection was estimated to be 1.09x10(-3) mol L(-1) (R.S.D.=1.9%). The proposed method was successfully applied to the determination of ranitidine in commercial brands of pharmaceuticals and no interferences were observed from the common excipients in formulations. The results obtained by the proposed method were favorably compared with those obtained by an official procedure at 95% confidence level. Additionally, the method was also applied to the determination of ranitidine in human urine showing excellent recoveries (99.6-100.3%).     

Molecular modeling and dynamics studies with explicit inclusion of electronic polarizability: theory and applications

A current emphasis in empirical force fields is on the development of potential functions that explicitly treat electronic polarizability. In the present article, the commonly used methodologies for modeling electronic polarization are presented along with an overview of selected application studies. Models presented include induced point-dipoles, classical Drude oscillators, and fluctuating charge methods. The theoretical background of each method is followed by an introduction to extended Lagrangian integrators required for computationally tractable molecular dynamics simulations using polarizable force fields. The remainder of the review focuses on application studies using these methods. Emphasis is placed on water models, for which numerous examples exist, with a more thorough discussion presented on the recently published models associated with the Drude-based CHARMM and the AMOEBA force fields. The utility of polarizable models for the study of ion solvation is then presented followed by an overview of studies of small molecules (e.g., CCl₄, alkanes, etc.) and macromolecule (proteins, nucleic acids and lipid bilayers) application studies. The review is written with the goal of providing a general overview of the current status of the field and to facilitate future application and developments.     

Development and validation of a stability-indicative agar diffusion assay to determine the potency of linezolid in tablets in the presence of photodegradation products

Linezolid (LNZ) is one of the first commercially available (and most widely used) oxazolidinone antibiotics. This study describes the development and validation of a microbiological assay, applying the cylinder-plate method, for the determination of the antibiotic linezolid, as well as the evaluation of the ability of the method in determining the stability of linezolid in tablets. The validation method yielded good results and included linearity, precision, accuracy, robustness and selectivity. The assay is based on the inhibitory effect of LNZ upon the strain of Bacillus subtilis ATCC 9372 used as the test microorganism. The results of the assay were treated statistically by analysis of variance (ANOVA) and were found to be linear (r² = 0.9998) in the range of 20-80 μg mL⁻¹, precise (inter-assay: R.S.D. = 0.61) and accurate (R.S.D. = 1.7). The method developed and validated proved to be indicative of stability and capable of determining the decay of linezolid in the presence of photodegradation products. Comparison of bioassay and liquid chromatography by ANOVA showed no significant difference between methodologies. The results demonstrated the validity of the proposed bioassay, which is a simple and useful alternative methodology for LNZ determination in routine quality control.     

A batch modelling approach to monitor a freeze-drying process using in-line Raman spectroscopy

Freeze-drying or lyophilisation is a batch wise industrial process used to remove water from solutions, hence stabilizing the solutes for distribution and storage. The objective of the present work was to outline a batch modelling approach to monitor a freeze-drying process in-line and in real-time using Raman spectroscopy. A 5% (w/v) d-mannitol solution was freeze-dried in this study as model. The monitoring of a freeze-drying process using Raman spectroscopy allows following the product behaviour and some process evolution aspects by detecting the changes of the solutes and solvent occurring during the process. Herewith, real-time solid-state characterization of the final product is also possible.The timely spectroscopic measurements allowed the differentiation between batches operated in normal process conditions and batches having deviations from the normal trajectory. Two strategies were employed to develop batch models: partial least squares (PLS) using the unfolded data and parallel factor analysis (PARAFAC). It was shown that both strategies were able to developed batch models using in-line Raman spectroscopy, allowing to monitor the evolution in real-time of new batches. However, the computational effort required to develop the PLS model and to evaluate new batches using this model is significant lower compared to the PARAFAC model. Moreover, PLS scores in the time mode can be computed for new batches, while using PARAFAC only the batch mode scores can be determined for new batches.     

Aristolactams and Alkamides of Aristolochia gigantea

A new aristolactam, aristolactam 9-O-β-D-glucopyranosyl-(1→2)-β-D-glucoside, and two alkamides, N-cis- and N-trans-p-coumaroyl-3-O-methyldopamine, were isolated from stems of Aristolochia gigantea, together with the known compounds allantoin, E-nerolidol, β-sitosterol, (+)-kobusin, (+)-eudesmin, trans-N-feruloyltyramine, trans-N-coumaroyltyramine, trans-N-feruloyl-3-O-methyldopamine, aristolactam Ia-N-β-D-glucoside, aristolactam Ia 8-β-D-glucoside, aristolactam IIIa, and magnoflorine. Their structures were determined by spectroscopic analyses.     

Characterisation of five coins from the archaeological heritage of Portugal

This paper reports a study carried out on three Roman and two Portuguese coins found in the archaeological site of São Pedro, in Fronteira (Alentejo, Portugal). The three Roman coins have been identified as a Follis, an AE 2 and an AE 3 (bronze alloys), while the Portuguese coins have been identified as a Ceitil (copper) and the “6 vinténs” (Ag–Cu alloy). Scanning electron microscopy (SEM) coupled to energy dispersive spectroscopy (EDS) has allowed the semi-quantitative determination of the elemental composition of both the corrosion products and the alloy used in the manufacture of the coins. The crystalline corrosion products constituents of the patinas were identified by X-ray powder diffraction spectroscopy (XRD). The more deteriorated coin, the AE 3, was submitted to electrochemical studies in Na₂SO₄ aqueous solution and the corresponding data analysed. After 3 weeks, the E _OCP was still quite stable, ranging between ?0.050 and ?0.070 V vs. SCE; the corrosion resistance, R _p, was of the order of 5 to 3?×?10³ Ω. Chemical treatment of the sample by 1-h immersion in 0.1 M NaOH produced a more active surface, with R _p showing a decrease of a factor of about ten. On the other hand, it was concluded from voltammetric data that polarisations of E _a?≥?0.050 V vs. SCE led to copper oxidation, with no reduction of the other corrosion products.     

Cardiolipin, a key component to mimic the E. coli bacterial membrane in model systems revealed by dynamic light scattering and steady-state fluorescence anisotropy

The phase transition temperatures of several lipidic systems were determined using two different techniques: dynamic light scattering (DLS) and steady-state fluorescence anisotropy, using two fluorescent probes that report different membrane regions (TMA-DPH and DPH). Atomic force microscopy (AFM) was used as a complementary technique to characterize different lipid model systems under study. The systems were chosen due to the increased interest in bacterial membrane studies due to the problem of antibiotic drug resistance. The simpler models studied comprised of mixtures of POPE and POPG lipids, which form a commonly used model system for Escherichia coli membranes. Given the important role of cardiolipin (CL) in natural membranes, a ternary model system, POPE/POPG/CL, was then considered. The results obtained in these mimetic systems were compared with those obtained for the natural systems E. coli polar and total lipid extract. DLS and fluorescence anisotropy are not commonly used to study lipid phase transitions, but it was shown that they can give useful information about the thermotropic behaviors of model systems for bacterial membranes. These two techniques provided very similar results, validating their use as methods to measure phase transitions in lipid model systems. The temperature transitions obtained from these two very different techniques and the AFM results clearly show that cardiolipin is a fundamental component to mimic bacteria membranes. The results suggest that the less commonly used ternary system is a considerably better mimic for natural E. coli membranes than binary lipid mixture.     

A review of power laws in real life phenomena

Power law distributions, also known as heavy tail distributions, model distinct real life phenomena in the areas of biology, demography, computer science, economics, information theory, language, and astronomy, amongst others. In this paper, it is presented a review of the literature having in mind applications and possible explanations for the use of power laws in real phenomena. We also unravel some controversies around power laws.     

Photomagnetism of a sym-cis-dithiocyanato iron(II) complex with a tetradentate N,N'-bis(2-pyridylmethyl)1,2-ethanediamine ligand

A comprehensive study of the magnetic and photomagnetic behaviors of cis-[Fe(picen)(NCS)(2) ] (picen = N,N'-bis(2-pyridylmethyl)1,2-ethanediamine) was carried out. The spin-equilibration was extremely slow in the vicinity of the thermal spin-transition. When the cooling speed was slower than 0.1?K min(-1), this complex was characterized by an abrupt thermal spin-transition at about 70?K. Measurement of the kinetics in the range 60-70?K was performed to approach the quasi-static hysteresis loop. At low temperatures, the metastable HS state was quenched by a rapid freezing process and the critical T(TIESST) temperature, which was associated with the thermally induced excited spin-state-trapping (TIESST) effect, was measured. At 10?K, this complex also exhibited the well-known light-induced excited spin-state-trapping (LIESST) effect and the T(LIESST) temperature was determined. The kinetics of the metastable HS states, which were generated from the freezing effect and from the light-induced excitation, was studied. Single-crystal X-ray diffraction as a function of speed-cooling and light conditions at 30?K revealed the mechanism of the spin-crossover in this complex as well as some direct relationships between its structural properties and its spin state. This spin-crossover (SCO) material represents a fascinating example in which the metastability of the HS state is in close vicinity to the thermal spin-transition region. Moreover, it is a beautiful example of a complex in which the metastable HS states can be generated, and then compared, either by the freezing effect or by the LIESST effect.     

Chemical composition, anti-inflammatory, molluscicidal and free-radical scavenging activities of the leaves of Ficus radicans 'Variegata' (Moraceae)

The methanol crude extract of the leaves of Ficus radicans Roxb. 'Variegata' (Moraceae) and the n-hexane, ethyl acetate and aqueous methanol fractions resulting from its fractionation were evaluated for their anti-inflammatory, molluscicidal and free-radical scavenging activities. The crude extract and fractions exhibited significant inhibition of inflammation in both croton oil (CO)-induced ear oedema in mice (p<0.001) and carrageenan-induced rat paw oedema models (p<0.01). The molluscicidal assay against Biomphalaria glabrata showed a weak activity for the n-hexane fraction (DL(50)=?400 μg mL(-1)). A moderated 1,1-diphenyl-1-picrylhydrazyl (DPPH) free-radical scavenging activity was observed for the ethyl acetate fraction (IC(50)=?66.2 μg mL(-1)). Fractionation of the extracts through chromatographic methods afforded the coumarins 7-methoxycoumarin, 7-hydroxy-6-methoxycoumarin and methoxy-3,4-dihydrocoumarin, the steroids β-sitosterol and β-sitosterol 3-O-β-glucopyranoside, as well as a cinnamic acid derivative and a flavonoid identified as trans-4-methoxy-2-β-D-glucopyranosyloxy cinnamic acid and quercetin 3-O-β-D-xylopyranosyl-(1?→?2)-α-L-rhamnopyranoside, respectively. The compounds were identified on the basis of their NMR spectral data and comparison with those previously reported in the literature.