Simultaneous Anodic Stripping Voltammetric Determination of Pb and Cd,Using a Vibrating Gold Microwire Electrode,Assisted by Chemometric Techniques

Simultaneous anodic stripping voltammetric determination of Pb and Cd is restricted on gold electrodes as a result of the overlapping of these two peaks. This work describes the quantitative determination of a binary mixture system of Pb and Cd, at low concentration levels (up to 15.0 and 10.0 µg L^?1 for Pb and Cd, respectively) by differential pulse anodic stripping voltammetry (DPASV; deposition time of 30 s), using a green electrode (vibrating gold microwire electrode) without purging in a chloride medium (0.5 M NaCl) under moderate acidic conditions (HCl 1.0 mM), assisted by chemometric tools. The application of multivariate curve resolution alternating least squares (MCR‐ALS) for the resolution and quantification of both metals is shown. The optimized MCR‐ALS models showed good prediction ability with concentration prediction errors of 12.4 and 11.4 % for Pb and Cd, respectively. The quantitative results obtained by MCR‐ALS were compared to those obtained with partial least squares (PLS) and classical least squares (CLS) regression methods. For both metals, PLS and MCR‐ALS results are comparable and superior to CLS. For Cd, as a result of the peak shift problem, the application of CLS was unsuitable. MCR‐ALS provides additional advantage compared to PLS since it estimates the pure response of the analytes signal. Finally, the built up multivariate calibration models, based either in MCR‐ALS or PLS regression, allowed to quantify concentrations of Pb and Cd in surface river water samples, with satisfactory results.     

Offline and online capillary electrophoresis enzyme assays of β-N-acetylhexosaminidase

Enzyme assays of β-N-acetylhexosaminidase from Aspergillus oryzae using capillary electrophoresis in the offline and online setup have been developed. The pH value and concentration of the borate-based background electrolyte were optimized in order to achieve baseline separation of N,N′,N″-triacetylchitotriose, N,N′-diacetylchitobiose, and N-acetyl-d-glucosamine. The optimized method using 25 mM tetraborate buffer, pH 10.0, was evaluated in terms of repeatability, limits of detection, quantification, and linearity. The method was successfully applied to the offline enzyme assay of β-N-acetylhexosaminidase, which was demonstrated by monitoring the hydrolysis of N,N′,N″-triacetylchitotriose. The presented method was also utilized to study the pH dependence of enzyme activity. An online assay with N,N′-diacetylchitobiose as a substrate was developed using the Transverse Diffusion of Laminar Flow Profiles model to optimize the injection sequence and in-capillary mixing of substrate and enzyme plugs. The experimental results were in good agreement with predictions of the model. The online assay was successfully used to observe the inhibition effect of N,N′-dimethylformamide on the activity of β-N-acetylhexosaminidase with nanoliter volumes of reagents used per run and a high degree of automation. After adjustment of background electrolyte pH, an online assay with N,N′,N″-triacetylchitotriose as a substrate was also performed.

Development and validation studies for determination of phenylpropanoid‐substituted flavan‐3‐ols in semipurified extract of Trichilia catigua by high‐performance liquid chromatography with photodiode array detection

The phenolic compounds are the main phytochemical constituents of the bark of Trichilia catigua and are commonly used for medicinal purposes. An HPLC method for the simultaneous quantification of phenolic compounds (procyanidin B2 (PB2), epicatechin (EPC), chinchonains Ia, Ib, IIa, IIb, catechin, and chrologenic acid) in T. catigua extract was developed and validated. A suitable chromatographic system was selected, which uses a gradient elution with methanol/ACN (75:25), and water both with 0.05% TFA, as mobile phase, column Luna, 280 nm, and flow 0.4 mL/min. Validation of the analytical method was based on the parameters: linearity, precision, LODs and LOQs, accuracy, robustness, and stability. The method showed linearity for PB2 and EPC, in the range 10–120 μg/mL with good correlation coefficients (>0.996). For precision, the repeatability ranged from 1.89 to 3.23%, and the values for accuracy for PB2 and EPC were 95 and 89%, respectively. The LODs and LOQs for PB2 were 1.36 and 4.12 μg/mL, and for EPC were 2.18 and 6.61 μg/mL, respectively. The method was robust under the conditions employed. The proposed method could be employed for quality assessment of T. catigua, as well as pharmaceutical products.     

Simple Reduction of Heteroaromatic Esters to Alcohols Using a Sodium Borohydride–Methanol System

Some heteroaromatic esters were reduced to the corresponding alcohols by using a sodium borohydride–methanol system. The reduction was completed within 0.15–2.0 h in refluxing THF. The alcohol products were isolated after aqueous workup in moderate to excellent yield (48–97%).     

Selective Sulfenylative Desulfonylation or Decarbalkoxylation of α-Sulfonyl Malonates with DABCO or Bu3N: Reactivity and Conformational Analysis

The study on reactivity of several α-substituted α-sulfonyl malonates toward 1,4-diazabicyclo[2.2.2]octane (DABCO) and Bu₃N is described. The reactivity with DABCO revealed the possible competition between decarbalkoxylation and unexpected desulfonylation, depending on the α-substituent, because of sterical hindrance around the electrophilic centers (SO₂ and CO₂R). The derivatives with crowded α-substituents suffer selective desulfonylation, and a novel and efficient desulfonylation method can be proposed. The dependence of the reactivity of α-sulfonyl malonates on the sterical hindrance around the electrophilic centers is confirmed by conformational analysis (Macromodel/MM2? and Mopac/MP3). The carbanionic mechanism is proved because the corresponding protonated, deuterated, and sulfenylated products were obtained by addition of the corresponding electrophilic agents. Bu₃N showed itself to be a novel selective decarbalkoxylation agent for any α-substituted α-sulfonyl malonate.     

A Convenient Method for the Preparation of 6,7-Methyl-Enedioxy-3-Alkyl-2-Hydroxy-1,4-Naphthoquinones from Natural Safrole and Carboxylic Acids

As part of our program to prepare substituted rtaphthoquinones with potential biological activity¹ we have synthetized 6, 7-methyleriedioxy-3-alky 1 lawsones (5a-g) from natural safrole (1) and carboxylic' acids (～50% overall yield).     

Cleansing contaminated seawaters using marine cyanobacteria: evaluation of trace metal removal from the medium

The use of microbial biomass in biosorption is already being studied as a potential alternative to (or combined with) conventional processes, where several algae and microorganisms have already shown promising ability to uptake metals. Cyanobacteria (blue-green algae) are widespread organisms, with specific properties, such as high nutrient removal capacity and tolerance to highly variable conditions which make them well-suited for wastewater and remediation purposes. The main aim of this work was to evaluate the use of a marine cyanobacterium LEANCYA 21 (Synechocystis sp.), collected from the Portuguese southern border, for the removal of selected trace metals when in natural seawater culture medium. It was observed, for the first time, that this particular strain is capable of uptaking Pb, Ni and Zn (at nM levels) from seawater solutions using small amounts of biomass. Uptake values for Pb were up to 90% (0.75 mg g^?1 biomass) in 6 h. The specific biosorption curves of Ni and Zn showed that these metals follow a first order kinetics biosorption in batch conditions. Solutions containing multimetals have revealed that Ni uptake is affected by the presence of Pb and Zn. The calculated specific absorption values were high enough to predict a possible application in aquaculture where such low levels of metals may inhibit microalgae growth.     

Synthesis of C 2 Symmetric Potential Inhibitors of HIV-1 Protease From D-Mannitol

ABSTRACT

D-Mannitol was used as precursor for the synthesis of acyclic C ₂ symmetric potential HIV-1 protease inhibitors. The 1- and 6-hydroxy groups of D-mannitol were substituted by -NHBoc, -NHValZ, -SAr, -SOAr and -SO₂Ar and the 2-and 5-hydroxy groups were benzylated. In some products one of the central hydroxyl groups was either inverted or deoxygenated. Despite a close structural similarity to previously published inhibitors none of the products showed significant inhibitory activity against HIV-1 protease.

     

Mercerized cellulose biocomposites: a study of influence of mercerization on cellulose supramolecular structure, water retention value and tensile properties

In this study the effect of the mercerization degree on the water retention value (WRV) and tensile properties of compression molded sulphite dissolving pulp was evaluated. The pulp was treated with 9, 10, or 11 % aqueous NaOH solution for 1 h before compression molding. To study the time dependence of mercerization the pulp was treated with 12 wt% aqueous NaOH for 1, 6 or 48 h. The cellulose I and II contents of the biocomposites were determined by solid state cross polarization/magic angle spinning carbon 13 nuclear magnetic resonance (CP/MAS ¹³C NMR) spectroscopy. By spectral fitting of the C6 and C1 region the cellulose I and II content, respectively, could be determined. Mercerization decreased the total crystallinity (sum of cellulose I and cellulose II content) and it was not possible to convert all cellulose I to cellulose II in the NaOH range investigated. Neither increased the conversion significantly with 12 wt% NaOH at longer treatment times. The slowdown of the cellulose I conversion was suggested as being the result from the formation of cellulose II as a consequence of coalescence of anti-parallel surfaces of neighboring fibrils (Blackwell et al. in Tappi 61:71–72, 1978; Revol and Goring in J Appl Polym Sci 26:1275–1282, 1981; Okano and Sarko in J Appl Polym Sci 30:325–332, 1985). Compression molding of the partially mercerized dissolving pulps yielded biocomposites with tensile properties that could be correlated to the decrease in cellulose I content in the pulps. Mercerization introduces cellulose II and disordered cellulose and lowered the total crystallinity reflected as higher water sensitivity (higher WRV values) and poorer stiffness of the mercerized biocomposites.     

Electrochemical derivatization‐capillary electrophoresis‐contactless conductivity detection: A versatile strategy for simultaneous determination of cationic,anionic, and neutral analytes

The simultaneous determination of cationic, anionic, and neutral analytes in a real sample was demonstrated by coupling electrochemical (EC) derivatization with counter‐EOF CE‐C⁴D. An EC flow cell was used to oxidize alcohols from an antiseptic mouthwash sample into carboxylic acids at a platinum electrode in acid medium. The carboxylates formed in the derivatization process and other sample ingredients, such as benzoate, saccharinate, and sodium ions, were separated in counter‐flow mode and detected in one run in Tris‐HCl buffer, pH 8.6. Fewer than 5 min were needed to complete each analysis with the automated flow system comprising solenoid pumps for the management of solutions. Insights into the electrochemistry of benzoic acid, present in the sample matrix, were also gained by EC‐CE‐C⁴D; more specifically, by applying potentials higher than 1.47 V to the platinum electrode, some formiate and minute amounts of salicylate were detected.