Reactivity of 2-halo-2H-azirines. 1. Reactions with nucleophiles.

Nucleophilic substitution reactions of 2-halo-2H-azirines 1a, 1b, 1d, and 1e with potassium phthalimide and aniline allowed the preparation of new substituted 2H-azirines 2-5. The reactions of 2-bromo-2H-azirine 1a with methylamine led to the synthesis of alpha-diimines 7 and 8. 2-Halo-2H-azirines were also established as building blocks for the synthesis of a range of heterocyclic compounds, namely, quinoxalines 10a-10d, 3-oxazoline 14, and 2H-[1,4]oxazines 18 and 20. X-ray crystal structures of alpha-diimine 7, 3-oxazoline 14, and 2H-[1,4]oxazine 18 are reported.     

Comparison of different strains of the yeastYarrowia lipolytica for citric acid production from glucose hydrol

Four commercial strains and two mutants of the yeast species Yarrowia lipolytica were screened using batch fermentation. Strain Y. lipolytica A-101-1.14 (induced with UV irradiation) was found to be the most suitable for citric acid production from glucose hydrol (39.9% glucose and 2.1% other sugars), a byproduct of glucose production from potato starch. The specific rate of total citric and isocitric acid production was 0.138 g/g.h, the yield on consumed glucose 0.93 g/g, and the productivity achieved was as high as 1.25 g/L.h. All of the tested yeast strains were able to utilize only the glucose from the glucose hydrol medium. Thus, some residual higher oligosaccharides remained in the process effluent.     

Study of cork (from Quercus suber L.)-wine model interactions based on voltammetric multivariate analysis

The cork from Quercus suber L. is the premium raw material used to produce wine-bottling stoppers; however, being a natural product, cork can be contaminated and attacked in different ways that could promote differences in its proprieties. A specific contamination is the defect known in the industry as “Mancha Amarela—Yellow spot” (MA). This cork shows modifications in its mechanical, structural and optical properties and is potentially able to cause off-flavours in wine. In this study, a new analytical approach is proposed for the rapid screening of cork-wine model interactions in order to determine if the cork were able to contaminate a wine. Cork samples classified as standard (S) and cork MA were put in contact with a wine model matrix. The model matrix was analysed by cyclic voltammetry and square wave voltammetry in function of different contact times. Considering that matrices in contact with cork S and MA exhibited different pH, the influence of this parameter on the distinction power was also evaluated. The data sets obtained from the different techniques were treated by principal component analysis (PCA) and PLS_Cluster. The major difference between samples S and MA is the occurrence of an important peak at ca. 580 mV in the MA voltammograms. This more positive peak may be assigned to lignin related phenolics; therefore, it can be proposed as a possible marker to follow lignin degradation.     

Sensitive spectrophotometric determination of gallium with eriochrome Cyanine R and cetyltrimethylammonium ions

Summary A new sensitive, spectrophotometric determination of gallium, based on the ternary gallium-Eriochrome Cyanine R-cetyltrimethylammonium system has been developed. At _max=588 nm the molar absorptivity is 1.20×10⁵l·mole^–1·cm^–1. The maximum absorbance is attained in 5 min in the presence of a 10-fold molar ratio of Eriochrome Cyanine R and an approx. 50-fold ratio of cetyltrimethylammonium bromide (to Ga). Citrate, EDTA and to a lesser extent tartrate, interfere. Interference by metals can be eliminated by a preliminary extraction of gallium with di-isopropyl ether from 7 M hydrochloric acid in the presence of ascorbic acid as reductant. The results for gallium (at a concentration level of 1×10^–4%) in aluminium metal and chloride indicate good precision and accuracy.

---

Empfindliche spektrophotometrische Bestimmung von Gallium mit Eriochromcyanin-R- und Cetyltrimethylammonium-Ionen

Zusammenfassung Ein neues, empfindliches spektrophotometrisches Verfahren zur Galliumbestimmung wurde ausgearbeitet. Es beruht auf der Verwendung des ternären Systems Gallium — EriochromcyaninR — Cetyltrimethylammonium. Bei _max=588 nm beträgt die molare Extinktion 1,20·10⁵ 1·Mol^–1·cm^–1. Die maximale Absorption wird innerhalb von 5 min bei Gegenwart der 10fachen molaren Menge EriochromcyaninR und der etwa 50fachen Menge Cetyltrimethylammoniumbromid erreicht. Citrat, ÄDTA und in geringerem Maß Tartrat stören. Störende Wirkung durch Metalle kann durch vorhergehende Extraktion des Galliums mit Diisopropyläther aus 7 M Salzsäure in Gegenwart von Askorbinsäure als Reduktionsmittel vermieden werden. Die Ergebnisse (im Konzentrationsbereich von 10^–4% Ga) in metallischem Aluminium und AICI₃ sind genau.

     

Potentiometric, luminescence and NMR study of the interaction of Eu with glyceryl phosphates

Complexation of europium(III) with glyceryl-1- and -2-phosphates has been studied by metal ion luminescence, ¹H and ¹³C NMR spectroscopy and potentiometry. From the luminescence and NMR studies, the formation of a 1:1 inner-sphere complex, in which the glyceryl phosphate is directly bound to the metal, is confirmed. Similar apparent binding constants at pH 2 were obtained by the three methods. Values obtained by NMR at pH 2 are 53 M⁻¹ and 12 M⁻¹ for glyceryl-1- and -2-phosphate, respectively. By comparison with literature data on related systems it is suggested that the ligands bind through the phosphate group. To obtain structural information from the NMR data, complexation has also been studied with the lanthanide ions Dy(III), Er(III) and Gd(III) using both chemical shift and relaxation data. From this, metal-proton distance ratios have been calculated. Comparison of ¹H and ¹³C NMR spectral data in the presence of paramagnetic lanthanides suggests conformational equilibria in the solutions. From the potentiometric studies, global formation constants have been determined, and speciation diagrams obtained over the pH range 1.5pH7.0 for ligand/metal ratios of 1 and 30. Implications of these results on lanthanide induced fusion of phospholipid membranes are discussed.     

Carbon-carbon coupling on tetrahedral iridium clusters: X-ray molecular structures and multinuclear NMR studies of the two isomeric forms of [Ir4(CO)6(μ3-η-HCCPh)(μ2-η-C4H2Ph2)(μ-PPh2)2]

The reactions of [HIr₄(CO)₉(Ph₂PCCPh)(μ-PPh₂)] (1) or [Ir₄(CO)₈(μ₃-η²-HCCPh)(μ-PPh₂)₂] (2) with HCCPh gave two isomeric forms of [Ir₄(CO)₆(μ₃-η²-HCCPh)(μ₂-η⁴-C₄H₂Ph₂)(μ-PPh₂)₂] (3 and 4) in good yields as the only products. These compounds were characterized with analytical and spectroscopic data including ¹H, ¹³C and ³¹P NMR (1 and 2D) spectroscopy and their molecular structures were established by X-ray diffraction studies. Compounds 3 and 4 exhibit the same distorted butterfly metal polyhedral arrangement of metal atoms with two μ-PPh₂ that occupy different positions in the structures of the two isomers. Both molecules contain a HCCPh ligand bonded in a μ₃-η²-// mode to one of the wings of the butterfly and a metallacyclic ring, which resulted from head-to-tail coupling, in the case of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(H)C(Ph)}(μ-PPh₂)₂] (3) and tail-to-tail coupling, in that of [Ir₄(CO)₆(μ₃-η²-HCCPh){μ₂-η⁴-(H)CC(Ph)C(Ph)C(H)}(μ-PPh₂)₂] (4), and which is linked to two metal atoms of the second wing of the butterfly.     

Computational studies of carbon nanotube-hydrocarbon bond strengths at nanotube ends: effect of link heteroatom and hydrocarbon structure

Semiempirical and density functional electronic structure theory methods were used to study SWNT-X--R bond strengths, where the single-walled carbon nanotube (SWNT) had an armchair or zigzag structure, the link heteroatom X was O, N(H), or S and the hydrocarbon chain R was CH(2)CH(3), CH(OH)CH(3), CHCH(2), or CH(CF(3))CH(3). In all systems the hydrocarbon was bonded to the end of the nanotube. The SWNT-X--R bond (that is, the bond joining the link atom to the hydrocarbon) is more than 0.4 eV stronger for armchair than for zigzag nanotubes with the same diameters, irrespective of whether O, N, or S are used as link atoms or whether OH, C==C, or CF(3) groups are present in the hydrocarbon chain. This raises the possibility for selective manipulation of armchair/zigzag nanotubes using a variety of link atoms and hydrocarbon structures. The SWNT-O--CH(CF(3))CH(3) bond is weaker than the SWNT-O--CH(2)CH(3) bond (for both armchair and zigzag nanotubes), while inclusion of a double bond in the ethyl chain increases the bond strengths. Also, SWNT-S--CH(2)CH(3) and SWNT-N(H)--CH(2)CH(3) bonds are stronger than SWNT-O--CH(2)CH(3) bonds.     

The Degree of Disorder in Hardwood Kraft Pulps Studied by Means of LODP

The amount of disordered material in two types of hardwood kraft pulps was estimated by determining the weight loss at the point where the levelling-off degree of polymerisation (LODP) was reached. The pulps used were commercial pulps viz (1)one conventional birch kraft and (2)one mixed hardwood (MHW) kraft pulp that had been prehydrolysed prior to cooking. The results indicated that the hemicellulose xylan is closely associated with the cellulose in commercial birch pulps. It is therefore only possible to use LODP as a measure of the crystallite length of hardwood cellulose in highly purified pulps, such as prehydrolysed kraft pulp. A model explaining the LODP-results is proposed.     

Uronic (hexenuronic) acid profile of ethanol–alkali delignification of giant reed Arundo donax L.

The effect of process variables on uronic acids (UAs) and hexenuronic acids (HexAs) in the annual crop Arundo donax L. during ethanol–alkali pulping has been examined. A substantial loss of UA moieties (up to 90%) was observed by the end of pulping (target kappa number 18) performed with 25% NaOH and 40% EtOH (by volume) within the temperature range of 130–150 °C. At the same time, the progressive formation of HexA in pulp was detected from the early phases of delignification. The proportion of HexA in the residual UA of the final pulp was found to be 84%, indicating almost complete conversion of 4-O-methylglucuronic acid side groups (MeGlcA) of heteroxylan into HexA. The kinetics of UA degradation and HexA formation has been described in terms of three consecutive first-order reaction stages. The overall rate of UA degradation was one order higher than the rate of UA conversion into HexA. The values of apparent activation energy were estimated as 68.6 and 94.7 kJ mol^–1, respectively. The reaction medium alkalinity was shown to be the controlling factor for UA and HexA stability during ethanol–alkali pulping. An increase in alkali charge from 5% to 35% (as NaOH) led to UA loss of 40%, but promoted HexA formation from 11.8 to 20.1 mol g^–1. The addition of organic solvent to the alkaline pulping solution had a similar effect, and about 10% of UA was lost and the content of HexA increased from 6.9 to 10.9 mol g^–1 with an increase in ethanol proportion in the liquor from 20% to 60%.