Synthesis of helix 69 of Escherichia coli 23S rRNA containing its natural modified nucleosides,m(3)Psi and Psi

The synthesis of 3-methylpseudouridine (m(3)Psi) phosphoramidite, 5'-O-[benzhydryloxybis(trimethylsilyloxy)silyl]-2'-O-[bis(2-acetoxyethoxy)methyl]-3-methylpseudouridine-3'-(methyl-N,N-diisopropyl)phosphoramidite, is reported. Selective pivaloyloxymethyl protection of the Psi N1 followed by methylation at N3 was used to generate the naturally occurring pseudouridine analogue. The m(3)Psi phosphoramidite was used in combination with pseudouridine (Psi) and standard base phosphoramidites to synthesize a 19-nucleotide RNA representing helix 69 of Escherichia coli 23S ribosomal RNA (rRNA) (residues 1906-1924), containing a single m(3)Psi at position 1915 and two Psi's at positions 1911 and 1917. Our synthesis of the fully modified helix 69 RNA demonstrates the ability to make milligram quantities of RNA that can be used for further high-resolution structure studies. Site-selective introduction of the methyl group at the N3 position of pseudouridine at position 1915 causes a slight increase in the thermodynamic stability of the RNA hairpin relative to pseudouridine; RNAs containing either uridine or 3-methyluridine at position 1915 have similar stability. One-dimensional imino proton NMR and circular dichroism spectra of the modified RNAs reveal that the methyl group does not cause any substantial changes in the RNA hairpin structure.     

Nuclear quadrupole hyperfine structure in the microwave spectrum of HCl-N2O: electric field gradient perturbation of N2O by HCl

The microwave spectra of six isotopomers of HCl-N(2)O have been obtained in the 7-19 GHz region with a pulsed molecular beam, Fourier transform microwave spectrometer. The nuclear quadrupole hyperfine structure due to all quadrupolar nuclei is resolved and the spectra are analyzed using the Watson S-reduced Hamiltonian with the inclusion of nuclear quadrupole coupling interactions. The spectroscopic constants determined include rotational constants, quartic and sextic centrifugal distortion constants, and nuclear quadrupole coupling constants for each quadrupolar nucleus. Due to correlations of the structural parameters, the effective structure of the complex cannot be obtained by fitting to the spectroscopic constants of the six isotopomers. Instead, the parameters for each isotopomer are calculated from the A and C rotational constants and the chlorine nuclear quadrupole coupling constant along the a-axis, chi(aa). There are two possible structures; the one in which hydrogen of HCl interacts with the more electronegative oxygen of N(2)O is taken to represent the complex. The two subunits are approximately slipped parallel. For H (35)Cl-(14)N(2)O, the distance between the central nitrogen and chlorine is 3.5153 A and the N(2)O and HCl subunits form angles of 72.30 degrees and 119.44 degrees with this N-Cl axis, respectively. The chlorine and oxygen atoms occupy the opposite, obtuse vertices of the quadrilateral formed by O, central N, Cl, and H. Nuclear quadrupole coupling constants show that while the electric field gradient of the HCl subunit remains essentially unchanged upon complexation, there is electronic rearrangement about the two nitrogen nuclei in N(2)O.     

Aggregation of [Cu(II)4] building blocks into [Cu(II)8] clusters or a [Cu(II)4]infinity chain through subtle chemical control

Coordination complexes of the ligand H3L [1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene] with Cu(II) are reported. Clusters showing various nuclearities or modes of supramolecular organization have been prepared by slightly changing the reaction conditions and have been crystallographically characterized. The reaction of H3L with one equivalent of Cu(OAc)2 in DMF yields the dinuclear complex [Cu2(HL)2(dmf)2] (1). Reaction in MeOH of H3L with an increased amount of metal, in the form of Cu(NO3)2, and excess strong base (nBu4NOH) affords the cluster [Cu8(L)2(OMe)8(NO3)2] (2). Complex 2 is a dimer of two linear [Cu4] arrays bridged by methoxide ligands, where the polynucleating ligand is fully deprotonated. The [Cu4]2 clusters are linked to each other by NO3- bridges to form one-dimensional coordination polymers. The link between [Cu8] units and their relative spatial positioning can be modified by changing the anion of the Cu(II) salt, as demonstrated by the synthesis of the cluster polymers [Cu8(L)2(OMe)8Cl2] (3) and [Cu8(L)(OMe)7.86Br2.14] (4), where only NO3- has been replaced by Cl- or Br-, respectively. Similarly, when ClO4- is used, compound [Cu8(L)2(OMe)8(ClO4)2(MeOH)4] (5) can be isolated. It contains independent [Cu8] units. A slight change in the stoichiometry of the reaction leading to 2 affords the related complex catena-[Cu4(L)(OMe)3(NO3)2(H2O)0.36] (6). This polymer contains essentially the same [Cu4] moiety as 2, albeit organized in a completely different arrangement. Each [Cu4] unit in 6 is linked by OMe- ligands to two such equivalent groups to form an infinite chain. Magnetic susceptibility measurements reveal weak antiferromagnetic exchange between Cu(II) centers in 1 (J = -0.73 cm(-1)) and strong antiferromagnetic coupling within [Cu4] chains in 2, 5, and 6 (most negative J values of -113.8 and -177.3 cm(-1) for 2 and 6, respectively).     

介孔镁铝复合氧化物的成孔机理及其结构特征

采用自行创制的成核/晶化隔离法,通过调变晶化时间制备了不同粒径的层状前体——镁铝水滑石,并将其于500℃焙烧,制得了孔径分布窄、具有介孔结构特征的镁铝复合氧化物,且该双金属复合氧化物的晶相结构是兼有MgO晶相和层状结构的复相结构.     

Heteronuclear Nickel‐Iron Complexes and the Crystal Structure of [Fe2(CO)6(μ3‐S)2{Ni(dppe)}]

A series of heteronuclear nickel‐iron complexes [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(PPh₃)₂}] ( 1 ), [Fe₂(CO)₆(μ‐SH)(μ₃‐S){NiCl(dppe)}] ( 2 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(PPh₃)₂}] ( 3 ), [Fe₂(CO)₆(μ₃‐S)₂{Ni(dppe)}] ( 4 ) and [Fe₂(CO)₆(μ‐SPh)(μ₃‐S){NiCl(dppe)}] ( 5 ) have been prepared. The structure of 4 has been determined by X‐ray crystallography. The central metal‐sulfur core of 4 has a trigonal bipyramidal shape with a NiFe₂ base plane with two axial sulfur atoms. Each iron atom is 5‐coordinate forming a distorted square pyramid; the nickel is square planar coordinated by two sulfur atoms and two phosphorus atoms.     

Structural characterization of isomeric triazolocoumarins by high- and low-energy collision spectrometry of M+˙, [M + H]+ and [M − H]− species

Two monometayl- and four dimethyl-triazolocoumarin isomers were characterized by their electron impact mass spectra and by low-energy collision experiments performed on molecular ions M⁺˙ and other fragment ions with an ion-trap mass spectrometer. High-energy collision-activated dissociation measurements were performed on the protonated [M + H]⁺ and deprotonated [M ? H]^? molecular ion obtained by fast atom bombardment and M⁺˙ species produced by electron impact ionization on a double-focusing, reverse-geometry instrument. The data obtained allowed unequivocal structural identification of all the compounds investigated.     

A new method for computing surface tension using a drop of liquid

In the simulation of a liquid drop it is expensive to calculate the excess pressure and obtain the surface tension by the Laplace formula. We use the Kelvin formula which only requires the vapour density, or at most the virial pressure. Some results are given for a Lennard-Jones 12-6 fluid.     

Synthesis of functionally diverse bicyclic sulfonamides as constrained proline analogues and application to the design of potential thrombin inhibitors

Bicyclic sulfonamides were synthesized from 4-alkenyl N-alkenylsulfonyl l-prolines using a ring-closure metathesis reaction. Three types of bicyclic sulfonamides varying in the size of the second ring (5,5; 5,6; 5,7) were synthesized. A sulfonamide counterpart of an indolizidinone 2-carboxylic acid was synthesized and evaluated for its activity against the enzyme thrombin.     

Regioselective and enantiospecific rhodium-catalyzed allylic amination with N-(arylsulfonyl)anilines

[reaction: see text]. The regioselective and enantiospecific rhodium-catalyzed allylic amination of secondary allylic carbonates 1 with N-(arylsulfonyl)anilines provides a convenient process for the construction of arylamines 2. This method, in conjunction with ring-closing metathesis and radical cyclization reactions, allows the direct construction of biologically relevant pharmacophores as exemplified by the construction of dihydroquinoline and dihydrobenzo[b]indoline derivatives.