锂金属电池用高浓度电解液体系研究进展

锂金属二次电池具有极高的能量密度,是下一代储能电池的研究热点。然而,金属锂负极在传统碳酸酯电解液1 mol·L^?1 LiPF6-EC/DEC(ethylene carbonate/diethyl carbonate)中充放电时,存在严重的枝晶生长和循环效率低下等问题,阻碍了其商业化应用。因此,开发与锂负极兼容的新型电解液体系是目前重要的研究任务。与传统稀溶液相比,高浓度电解液体系具有独有的物化性质和优异的界面相容性,并且能有效抑制锂枝晶生长、显著提升锂负极的循环可逆性,因而格外受到关注。本文综述了高浓度电解液及局部高浓电解液体系的最新研究进展,分析了其溶液化学结构和物化性质,对其与锂负极的界面相容性、枝晶抑制效果、效率提升能力及界面稳定性机制进行了探讨;文章着重介绍了高浓与局部高浓电解液体系在锂金属二次电池中的应用,同时从基础科学研究和应用研究两个层面对高浓电解液和局部高浓电解液存在的主要问题进行了简要分析,并对其未来发展方向进行了展望。     

Construction of the nano-carbon connections among the carbon-coated LiFe0.8Mn0.2PO4 grains by sol-gel technique

Nano-carbon connections among carbon-coated LiFe_0.8Mn_0.2PO₄ grains are successfully constructed using polyacrylic acid and sucrose as carbon sources by sol-gel method, which can improve the electrochemical performance of LiFe_0.8Mn_0.2PO₄. Samples were characterised by X-ray diffraction, scanning electron microscopy and electrochemical tests. The electrochemical tests show LiFe_0.8Mn_0.2PO₄ grains connected by nano-carbon networks obtain the discharge specific capacity of 165 mA h g^?1 at 0.1 C rate and excellent rate capability. Its specific capacity reaches 122 mA h g^?1 at 5 C rate. Its capacity retention at 5 C rate attains 97% cycled 100 cycles. Therefore the construction of nano-carbon networks offers an effective and convenient technique to improve the specific capacities and rate capabilities of electrode materials of low electronic conductivity.     

Time‐Resolved Assembly of Cluster‐in‐Cluster {Ag12}‐in‐{W76} Polyoxometalates under Supramolecular Control

We report the time‐resolved supramolecular assembly of a series of nanoscale polyoxometalate clusters (from the same one‐pot reaction) of the form: [H_(10+m)Ag₁₈Cl(Te₃W₃₈O₁₃₄)₂]_n, where n=1 and m=0 for compound 1 (after 4 days), n=2 and m=3 for compound 2 (after 10 days), and n=∞ and m=5 for compound 3 (after 14 days). The reaction is based upon the self‐organization of two {Te₃W₃₈} units around a single chloride template and the formation of a {Ag₁₂} cluster, giving a {Ag₁₂}‐in‐{W₇₆} cluster‐in‐cluster in compound 1 , which further aggregates to cluster compounds 2 and 3 by supramolecular Ag‐POM interactions. The proposed mechanism for the formation of the clusters has been studied by ESI‐MS. Further, control experiments demonstrate the crucial role that TeO₃^2?, Cl^?, and Ag⁺ play in the self‐assembly of compounds 1 – 3 .     

Voltage‐Driven Reversible Insertion into and Leaving from a Lipid Bilayer: Tuning Transmembrane Transport of Artificial Channels

Three new artificial transmembrane channel molecules have been designed and synthesized by attaching positively charged Arg‐incorporated tripeptide chains to pillar[5]arene. Fluorescent and patch‐clamp experiments revealed that voltage can drive the molecules to insert into and leave from a lipid bilayer and thus switch on and off the transport of K⁺ ions. One of the molecules was found to display antimicrobial activity toward Bacillus subtilis with half maximal inhibitory concentration (IC₅₀) of 10 μM which is comparable to that of natural channel‐forming peptide alamethicin.     

Three dimension Liesegang rings of calcium hydrophosphate in gelatin

Three dimensional Liesegang spherical layers of CaHPO₄ in gelatin ball were performed by employing CaCl₂ and Na₂HPO₄ as the inner and outer electrolyte, respectively. Effects of concentrations of inner and outer electrolyte as well as pH on the morphologies of Liesegang rings (LRs) were investigated. As a result, it was observed that the time law, spacing law and width law found in 1D/2D gel systems were obeyed in this 3D gelatin system. The interaction of Ca²⁺ and HPO₄ ^2? with gelatin matrix played a key role to the formation of LRs due to the existence of carboxylic groups on the gelatin chains. Using Ca²⁺ as the inner electrolyte, LRs were prepared. However, employing HPO₄ ^2? as inner electrolyte, LRs were not obtained. Moreover, pH of gelatin solution greatly impacted on the formation of LRs. The number of LRs increased with the decrease of pH, whereas the width inversely decreased. pH 4.40 was a turn point, from which the spacing coefficient abruptly increased as pH increased. All these results indicated that the network was created by the interaction of Ca²⁺ and –COO^? of gelatin chains, which dominated the formation of CaHPO₄ LRs in gelatin.     

苏丹红猝灭吖啶染料荧光的动力学研究

在体积分数95%乙醇介质中,吖啶黄、吖啶橙的荧光发射波长与苏丹红染料的吸收波长十分接近。实验数据表明,随着苏丹红I~IV用量的增加,溶液中吖啶黄、吖啶橙荧光发射强度明显降低,其荧光猝灭程度与苏丹红用量成正比。动力学研究表明苏丹红I,II与吖啶黄或吖啶橙之间可形成非共价复合物,从而发生静态荧光猝灭;而苏丹红III,IV猝灭吖啶黄或吖啶橙则表现为一种复杂的动力学特点,可能同时存在静态荧光猝灭与动态猝灭。     

Mercury forms and their transformation in pyrite under weathering

Pyrite is considered to be the major carrier of mercury in coal. Here, the chemical characteristics of two natural pyrite samples of different weathering degrees were characterized by time-of-flight secondary ion mass spectrometry (TOF-SIMS). Thermal stability of Hg was also analyzed via temperature programmed desorption experiment (TPD). Characteristic ions such as S⁻, Fe⁺, FeS⁻, and FeS₂⁻ were detected on the surface of fresh pyrite. The release temperature of Hg ranged between 180°C and 300°C, and the characteristic peak of black HgS was recorded. In addition, abundant Fe₂O₃⁻, FeSO⁻, SO₄⁻, and HSO₄⁻ were detected on the surface of weathered pyrite, and the release temperature of Hg therein was mainly distributed at 260°C to 380°C and 520°C to 600°C, corresponding to the characteristic peaks of red HgS and HgSO₄, respectively. The results show that pyrite is acidified during weathering and that Hg forms in pyrite are transformed from the original state (HgS) to HgSO₄.     

Electrochemical codeposited polypyrrole–tungsten oxide composite materials with wide potential windows

The three-dimensional morphology has sufficient interface contact and can be in favor of the electronic transport process. In this work, the demand for high-performance electrodes such as energy storage devices has been designed. Polypyrrole and tungsten oxide composite materials (PPy-WO₃) have been synthesized by cyclic voltammetry (CV) technology at −0.6 to 0.9 V versus saturated calomel electrode (SCE) for 20 cycles. The PPy-WO₃^{20 mV/s}, PPy-WO₃^{60 mV/s}, and PPy-WO₃^{120 mV/s} electrodes have been prepared by CV technology at sweep rates of 20, 60, and 120 mV/s. The influences of scan rate on morphologies and charge storage properties of the composites are discussed. Among them, a three-dimensional flake structure for PPy-WO₃^{20 mV/s} with a size of up to several micrometers was synthesized. PPy-WO₃^{20 mV/s} composites as electrode materials exhibit a wide charge storage potential window of 1.4 V (between −0.9 and 0.5 V vs. SCE) and a specific capacitance of 145.13 F/g at 1 mA/cm². Moreover, the long-term stability of PPy-WO₃^{20 mV/s} and PPy has been investigated in 5 M LiCl aqueous electrolyte. The stability of the materials can be improved by inorganic and organic composites.