Highly efficient N-glycoproteomic sample preparation by combining C18 and graphitized carbon adsorbents

Conventional N-glycoproteome analysis usually applies C₁₈ reversed-phase (RP) adsorbent for sample purification, which will lead to unavoidable sample loss due to the high hydrophilicity of N-glycopeptides. In this study, a porous graphitized carbon (PGC) absorbent was combined with a C₁₈ adsorbent for N-glycopeptide purification in comprehensive N-glycoproteome analysis based on the hydrophobic and polar interactions between carbon and N-glycans. It was observed that the small hydrophilic N-glycopeptides that cannot retain onto C₁₈ adsorbent can be captured by the graphitized carbon, while the large hydrophobic N-glycopeptides that cannot retain onto the graphitized carbon can be feasibly captured by the C₁₈ adsorbent. Comparing with sample purification by using C₁₈ adsorbent only, 28.5 % more N-glycopeptides were identified by combining both C₁₈ and PGC adsorbents. The C₁₈-PGC strategy was further applied for both sample purification and pre-fractionation of a complex protein sample from HeLa cell. After hydrophilic interaction chromatography enrichment, 1,484 unique N-glycopeptides with 1,759 unique N-glycosylation sites were finally identified.

A wide range optical pH sensor for living cells using Au@Ag nanoparticles functionalized carbon nanotubes based on SERS signals

p-Aminothiophenol (pATP) functionalized multi-walled carbon nanotubes (MWCNTs) have been demonstrated as an efficient pH sensor for living cells. The proposed sensor employs gold/silver core-shell nanoparticles (Au@Ag NPs) functionalized MWCNTs hybrid structure as the surface-enhanced Raman scattering (SERS) substrate and pATP molecules as the SERS reporters, which possess a pH-dependent SERS performance. By using MWCNTs as the substrate to be in a state of aggregation, the pH sensing range could be extended to pH 3.0～14.0, which is much wider than that using unaggregated Au@Ag NPs without MWCNTs. Furthermore, the pH-sensitive performance was well retained in living cells with a low cytotoxicity. The developed SERS-active MWCNTs-based nanocomposite is expected to be an efficient intracellular pH sensor for bio-applications.     

Photofragment translational spectroscopy at 304 nm from C-H symmetric stretch excited CH3I [v 1 = 1]

The 304 nm photodissociation of the C-H symmetric stretch excited CH3I[v1=1,v2=0](v1 denotes the C-H symmetric stretch mode,and v2 denotes the umbrella mode)is studied with our simple photofragment translational spectrometer.An IR laser is used to excite the ground state CH3I[0,0]to the C-H symmetric stretch excited CH3I[1,0].With IR laser OFF and ON,the fractions of photofragments CH3(ν1,ν2)from the 304 nm photodissociation of CH3I[1,0]have been determined through the photofragment translational spectra(PTS)from measuring I and I*and also through the PTS from measuring CH3(0,0)(1,0)(0,1)and(1,1).The experimental results show that the C-H symmetric stretch vibration(v1=1)in parent molecules is about 66%retained in the photofragments in the I channel,but only 24%in the I*channel.The populations of photofragments CH3(0,2)and(0,3)are higher than CH3(0,0)and(0,1),showing strong inverted population both in I and I*channels.     

Development of novel graphene-like layered hexagonal boron nitride for adsorptive removal of antibiotic gatifloxacin from aqueous solution

Graphene-like layered hexagonal boron nitride (g-BN) was prepared and characterized. The performance of using g-BN as an adsorbent for removal of fluoroquinolone antibiotic gatifloxacin (GTF) from aqueous solution was evaluated. g-BN showed an excellent adsorption capability with notable GTF adsorption ratio of more than 90%. Data of equilibrium adsorption of GTF onto g-BN at different temperatures were represented by Langmuir, Freundlich and Tempkin isotherm models, and Langmuir exhibited the best fitting with the maximum adsorption capacity of 88.5 mg·g^?1 at 288 K. GTF adsorption was insignificantly affected by solution pH. Competitive role of Na⁺ and Ca²⁺ in the solution inhibited the adsorption of GTF and decreased the adsorption capacity a bit. The adsorption process was spontaneous and exothermic. The adsorption was probably governed by π–π interaction between GTF and g-BN, and electrostatic interaction may also exist in the adsorption process.     

Well‐Defined Flowerlike NdOCl Nanostructures: Nonaqueous Sol–Gel Synthesis,Nanoscale Characterization and Their Magnetic and Photoluminescence Properties

A facile nonaqueous solution route for the fabrication of NdOCl nanostructures based on a ligand‐exchange protocol and further thermal decomposition in organic medium, using only chloride salt as the neodymium source, is reported and the formation mechanism is proposed. The morphology, crystal structure, and chemical compositions of the sample were characterized at the nanoscale. XRD results and selected‐area electron diffraction patterns show that the sample is purely tetragonal NdOCl without any other impurity phases. TEM results show that the NdOCl nanostructures have a well‐defined flowerlike shape, which looks like a chrysanthemum just about to bloom. Magnetization measurements reveal that the NdOCl nanoflowers show room‐temperature ferromagnetism. The photoluminescence properties were also studied. These results are significant for fundamental research and promising applications of rare‐earth‐based nanostructures.     

Direct Photocatalysis for Organic Synthesis by Using Plasmonic‐Metal Nanoparticles Irradiated with Visible Light

Recent advances in direct‐use plasmonic‐metal nanoparticles (NPs) as photocatalysts to drive organic synthesis reactions under visible‐light irradiation have attracted great interest. Plasmonic‐metal NPs are characterized by their strong interaction with visible light through excitation of the localized surface plasmon resonance (LSPR). Herein, we review recent developments in direct photocatalysis using plasmonic‐metal NPs and their applications. We focus on the role played by the LSPR of the metal NPs in catalyzing organic transformations and, more broadly, the role that light irradiation plays in catalyzing the reactions. Through this, the reaction mechanisms that these light‐excited energetic electrons promote will be highlighted. This review will be of particular interest to researchers who are designing and fabricating new plasmonic‐metal NP photocatalysts by identifying important reaction mechanisms that occur through light irradiation.     

A Highly Selective and Sensitive Turn-On Fluorescent Chemosensor Based on Rhodamine 6G for Iron(III)

Recently, more and more rhodamine derivatives have been used as fluorophores to construct sensors due to their excellent spectroscopic properties. A rhodamine-based fluorescent and colorimetric Fe³⁺ chemosensor 3’,6’-bis(ethylamino)-2-acetoxyl-2’,7’-dimethyl-spiro[1H-isoindole-1,9’-[9H]xanthen]-3(2H)-one (RAE) was designed and synthesized. Upon the addition of Fe³⁺, the dramatic enhancement of both fluorescence and absorbance intensity, as well as the color change of the solution, could be observed. The detection limit of RAE for Fe³⁺ was around 7.98 ppb. Common coexistent metal ions showed little or no interference in the detection of Fe³⁺. Moreover, the addition of CN⁻ could quench the fluorescence of the acetonitrile solution of RAE and Fe³⁺, indicating the regeneration of the chemosensor RAE. The robust nature of the sensor was shown by the detection of Fe³⁺ even after repeated rounds of quenching. As iron is a ubiquitous metal in cells and plays vital roles in many biological processes, this chemosensor could be developed to have applications in biological studies.