Semi-synthetic polysaccharide sulfates as anticoagulant coatings for PET, 1--cellulose sulfate

In the present study, blood-compatible PET surfaces were prepared by coating with anticoagulant cellulose sulfates that were synthesized homogeneously in ionic liquids. The adsorption behavior of polysaccharides on PET films was investigated using QCM-D. It was demonstrated that pre-coating with different amino-group-containing polysaccharides improves the affinity toward cellulose sulfate. Moreover, the effect of different degrees of sulfation on the adsorption process was evaluated. Based on these results, several layer-by-layer coated PET foils were prepared that showed significantly improved blood compatibility compared to the initial untreated material.     

Metabolite extraction from adherently growing mammalian cells for metabolomics studies: optimization of harvesting and extraction protocols

Trypsin/ethylenediaminetetraacetic acid (EDTA) treatment and cell scraping in a buffer solution were compared for harvesting adherently growing mammalian SW480 cells for metabolomics studies. In addition, direct scraping with a solvent was tested. Trypsinated and scraped cell pellets were extracted using seven different extraction protocols including pure methanol, methanol/water, pure acetone, acetone/water, methanol/chloroform/water, methanol/isopropanol/water, and acid–base methanol. The extracts were analyzed by GC-MS after methoximation/silylation and derivatization with propyl chloroformate, respectively. The metabolic fingerprints were compared and 25 selected metabolites including amino acids and intermediates of energy metabolism were quantitatively determined. Moreover, the influence of freeze/thaw cycles, ultrasonication and homogenization using ceramic beads on extraction yield was tested. Pure acetone yielded the lowest extraction efficiency while methanol, methanol/water, methanol/isopropanol/water, and acid–base methanol recovered similar metabolite amounts with good reproducibility. Based on overall performance, methanol/water was chosen as a suitable extraction solvent. Repeated freeze/thaw cycles, ultrasonication and homogenization did not improve overall metabolite yield of the methanol/water extraction. Trypsin/EDTA treatment caused substantial metabolite leakage proving it inadequate for metabolomics studies. Gentle scraping of the cells in a buffer solution and subsequent extraction with methanol/water resulted on average in a sevenfold lower recovery of quantified metabolites compared with direct scraping using methanol/water, making the latter one the method of choice to harvest and extract metabolites from adherently growing mammalian SW480 cells.     

Asymptotic properties of fractional delay differential equations

In this paper we study the asymptotic properties of d-dimensional linear fractional differential equations with time delay. We present necessary and sufficient conditions for asymptotic stability of equations of this type using the inverse Laplace transform method and prove polynomial decay of stable solutions. Two examples illustrate the obtained analytical results.     

The twistor spinors of generic 2- and 3-distributions

Generic distributions on 5- and 6-manifolds give rise to conformal structures that were discovered by P. Nurowski resp. R. Bryant. We describe both as Fefferman-type constructions and show that for orientable distributions one obtains conformal spin structures. The resulting conformal spin geometries are then characterized by their conformal holonomy and equivalently by the existence of a twistor spinor which satisfies a genericity condition. Moreover, we show that given such a twistor spinor we can decompose a conformal Killing field of the structure. We obtain explicit formulas relating conformal Killing fields, almost Einstein structures and twistor spinors.     

Comparison of two algorithmic data processing strategies for metabolic fingerprinting by comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

The alignment algorithm Statistical Compare (SC) developed by LECO Corporation for the processing of comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC×GC-TOFMS) data was validated and compared to the in-house developed retention time correction and data alignment tool INCA (Integrative Normalization and Comparative Analysis) by a spike-in experiment and the comparative metabolic fingerprinting of a wild type versus a double mutant strain of Escherichia coli (E. coli). Starting with the same peak lists generated by LECO's ChromaTOF software, the accuracy of peak alignment and detection of 1.1- to 4-fold changes in metabolite concentration was assessed by spiking 20 standard compounds into an aqueous methanol extract of E. coli. To provide the same quality input signals for both alignment routines, the universal m/z 73 trace of the trimethylsilyl (TMS) group was used as a quantitative measure for all features. The performance of data processing and alignment was evaluated and illustrated by ROC curves. Statistical Compare performed marginally better at the lower fold changes, while INCA did so at the higher fold changes. Using SC, quantitative precision could be improved substantially by exploiting the signal intensities of metabolite-specific unique (U) m/z ion traces rather than the universal m/z 73 trace. A list of 56 features that distinguished the two E. coli strains was obtained by the SC alignment using m/z U with an estimated false discovery rate (FDR) of <0.05. Ultimately, 23 metabolites could be identified, one additional and five less than with INCA due to the failure of SC to extract unitized m/z U's across all fingerprints with suitable spectral intensities for the latter metabolites.     

Towards nanoscale composite particles of dual complexity

The fabrication of heteroaggregates comprising inorganic and organic nanoparticles of different sizes is reported. Control over the assembly of nanoscale functional building units is of great significance to many practical applications. Joining together different spherical nanoparticles in a defined manner allows control over the shape of the composites. If two types of constituents are chosen that differ in size, the surfaces of the composites exhibit two specific radii of curvature, yielding aggregates of dual surface roughness. Moreover, if the constituents consist of different materials, the resulting heteroaggregates feature both compositional and interfacial anisotropy, offering unprecedented perspectives for custom-tailored colloids. This study describes a two-step approach towards such designer particles. At first, amine-modified polystyrene particles with 154 nm diameter were assembled into clusters of well-defined configurations. Onto these, oppositely charged inorganic particles with diameters of only a few nanometres were deposited by direct uptake from solution, resulting in numerous functional entities all over the surface of the polymer clusters. Despite the fact that oppositely charged constituents are brought together, charge reversal by uptake of nanoparticles allows for stable suspensions of heterocomposites. Hence, the possibility to assemble particles into nanoscale heterocomposites with full control over shape, composition, and surface roughness is demonstrated.     

Catalytic synthesis of vinylphosphanes via calcium-mediated intermolecular hydrophosphanylation of alkynes and butadiynes

The calcium complex [(thf)₄Ca(PPh₂)₂] (1) is a very effective catalyst for the hydrophosphanylation of substituted alkynes of the type R-CC-R (R = Me, Ph) yielding (E)-1,2-diphenyl-1-diphenylphosphanylethene (2a) and (Z)-1-phenyl-2-diphenylphosphanyl-1-propene (2b). The calcium-mediated hydrophosphanylation of butadiynes of the type R-CC-CC-R (R = Me, SiMe₃, Ph, Mes, tBu) proceeds less selectively and diverse products are obtained such as 1,4-substituted 1,4-bis(diphenylphosphanyl)-1,3-butadienes (3), 1,4-diphenyl-1,2-bis(diphenylphosphanyl)-1,3-butadiene (4), and 1,4-di(tert-butyl)-1,4-bis(diphenylphosphanyl)buta-1,2-diene (5). Besides these regioisomers also several configuration isomers with respect to the C=C double bonds [(E)/(Z) isomerism] are obtained. A catalytic cycle can be formulated with the first addition of a Ca-P bond of the catalyst 1 to a CC triple bond always leading to the formation of an intermediate with the newly formed C-P bond in 1-position whereas the remaining phosphanido calcium fragment binds to the carbon in 2-position. The addition of a second diphenylphosphane is much faster and therefore, only two-fold hydrophosphanylated butadiynes are observed. Neither addition products with only one HPPh₂ group nor those with more than two PPh₂ substituents are obtained.     

Structure–Function Relationships of New Lipids Designed for DNA Transfection

Cationic liposome/DNA complexes can be used as nonviral vectors for direct delivery of DNA‐based biopharmaceuticals to damaged cells and tissues. To obtain more effective and safer liposome‐based gene transfection systems, two cationic lipids with identical head groups but different chain structures are investigated with respect to their in vitro gene‐transfer activity, their cell‐damaging characteristics, and their physicochemical properties. The gene‐transfer activities of the two lipids are very different. Differential scanning calorimetry and synchrotron small‐ and wide‐angle X‐ray scattering give valuable structural insight. A subgel‐like structure with high packing density and high phase‐transition temperature from gel to liquid‐crystalline state are found for lipid 7 (N′‐2‐[(2,6‐diamino‐1‐oxohexyl)amino]ethyl‐2,N‐bis(hexadecyl)propanediamide) containing two saturated chains. Additionally, an ordered head‐group lattice based on formation of a hydrogen‐bond network is present. In contrast, lipid 8 (N′‐2‐[(2,6‐diamino‐1‐oxohexyl)amino]ethyl‐2‐hexadecyl‐N‐[(9Z)‐octadec‐9‐enyl]propanediamide) with one unsaturated and one saturated chain shows a lower phase‐transition temperature and a reduced packing density. These properties enhance incorporation of the helper lipid cholesterol needed for gene transfection. Both lipids, either pure or in mixtures with cholesterol, form lamellar phases, which are preserved after addition of DNA. However, the system separates into phases containing DNA and phases without DNA. On increasing the temperature, DNA is released and only a lipid phase without intercalated DNA strands is observed. The conversion temperatures are very different in the two systems studied. The important parameter seems to be the charge density of the lipid membranes, which is a result of different solubility of cholesterol in the two lipid membranes. Therefore, different binding affinities of the DNA to the lipid mixtures are achieved.     

Reactive Nanoparticles Derived from Polysaccharide Phenyl Carbonates

Polysaccharide (PS) based nanoparticles (NP) are of great interest for biomedical applications. A key challenge in this regard is the functionalization of these nanomaterials. The aim of the present work was the development of reactive PS-NP that can be coupled with an amino group containing compounds under mild aqueous conditions. A series of cellulose phenyl carbonates (CPC) and xylan phenyl carbonates (XPC) with variable degrees of substitution (DS) was obtained by homogeneous synthesis. The preparation of PS-NP by self-assembling of these hydrophobic derivatives was studied comprehensively. While CPC mostly formed macroscopic aggregates, XPC formed well-defined spherical NP with diameters around 100 to 200 nm that showed a pronounced long-term stability in water against both particle aggregation as well as cleavage of phenyl carbonate moieties. Using an amino group functionalized dye it was demonstrated that the novel XPC-NP are reactive towards amines. A simple coupling procedure was established that enables direct functionalization of the reactive NP in an aqueous dispersion. Finally, it was demonstrated that dye functionalized XPC-NP are non-cytotoxic and can be employed in advanced biomedical applications.     

Star polymers by ATRP of styrene and acrylates employing multifunctional initiators

Multifunctional initiators for atom transfer radical polymerization (ATRP) are prepared by converting ditrimethylolpropane with four hydroxyl groups, dipentaerythritol with six hydroxyl groups, and poly(3‐ethyl‐3‐hydroxymethyl‐oxetane) with ～11 hydroxyl groups to the corresponding 2‐bromoisobutyrates or 2‐bromopropionates as obtained by reaction with acid bromides. Star polystyrene (PS) is produced by using these macroinitiators and neat styrene in a controlled manner by ATRP at 110 °C, employing the catalytic system CuBr and bipyridine. M_n up to 51,000 associated with narrow molecular weight distributions (PDI < 1.1) are obtained with conversions up to 32%. Hydrolysis of the star‐PS leads to linear chains having the expected M_n values. The star‐PS polymers based on dipentaerythritol degrade thermally in nitrogen in a two‐step process in which the first low‐temperature step involves scission of the ester linkages and the second step corresponds to the normal PS degradation. Star poly(methyl acrylates) with various cores are likewise prepared in a controlled manner by ATRP of methyl acrylate in bulk and in solution at 60–80 °C with the 1,1,4,7,7‐pentamethyldiethylene triamine ligand. Under these conditions, higher conversions were possible still maintaining low PDI signaling controlled star growth. Multiarm stars of poly(n‐butyl acrylate) and poly(n‐hexyl acrylate) with controlled characteristics have also been prepared. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3748–3759, 2005