Thermodynamic and kinetic data for adduct formation, cis-trans isomerization and redox reactions of ML4 complexes: a case study with rhodium- and iridium-tropp complexes in d8, d9 and d10 valence electron configurations (tropp=dibenzotropylidene phosphanes)

The formation of adducts of the square-planar 16-electron complexes trans-[M(tropp(ph))(2)](+) and cis-[M(tropp(ph))(2)](+) (M=Rh, Ir; tropp(Ph)=5-diphenylphosphanyldibenzo[a,d]cycloheptene) with acetonitrile (acn) and Cl(-), and the redox chemistry of these complexes was investigated by various physical methods (NMR and UV-visible spectroscopy, square-wave voltammetry), in order to obtain some fundamental thermodynamic and kinetic data for these systems. A trans/cis isomerization cannot be detected for [M(tropp(ph))(2)](+) in non-coordinating solvents. However, both isomers are connected through equilibria of the type trans-[M(tropp(ph))(2)](+)+L<==>[ML(tropp(ph))(2)](n)<==>cis-[M(tropp(ph))(2)](+)+L, involving five-coordinate intermediates [ML(tropp(ph))(2)](n) (L=acn, n=+1; L=Cl(-), n=0). Values for K(d) (K(f)), that is, the dissociation (formation) equilibrium constant, and k(d) (k(f)), that is, the dissociation (formation) rate constant, were obtained. The formation reactions are fast, especially with the trans isomers (k(f)>1x10(5) m(-1) s(-1)). The reaction with the sterically more hindered cis isomers is at least one order of magnitude slower. The stability of the five-coordinate complexes [ML(tropp(ph))(2)](n) increases with Ir>Rh and Cl(-)>acn. The dissociation reaction has a pronounced influence on the square-wave (SW) voltammograms of trans/cis-[Ir(tropp(ph))(2)](+). With the help of the thermodynamic and kinetic data independently determined by other physical means, these reactions could be simulated and allowed the setting up of a reaction sequence. Examination of the data obtained showed that the trans/cis isomerization is a process with a low activation barrier for the four-coordinate 17-electron complexes [M(tropp(ph))(2)](0) and especially that a disproportionation reaction 2 trans/cis-[M(tropp(ph))(2)](0)-->[M(tropp(ph))(2)](+)+[M(tropp(ph))(2)](-) may be sufficiently fast to mask the true reactivity of the paramagnetic species, which are probably less reactive than their diamagnetic equilibrium partners.     

Nickel(II)-komplexe des unsubstituierten cyclobutadiens

cis- and trans-3,4-Dichlorocyclobutene (I) react with Ni(CO)₄ and AlCl₃ to give (C₄H₄)NiCl₂ · AlCl₃ (II), while the bromo- and iodo-substituted cyclobutenes (III) without AlCl₃ yield the complexes (C₄H₄)NiX₂ (IVa, X  Br; IVb, X  I). Properties of II and IV are discussed and the presence of a C₄H₄ ring attached to nickel is likely from the results obtained.     

The Chemistry of Simple Phosphorus-Carbon Compounds

With the aid of selected examples an overview is given of the development trends in phosphoruscarbon chemistry over the past few years. An attempt is made to demonstrate the relationships between various parameters and properties such as constitution, basicity, substitution by functional groups, reaction behavior etc. of the compounds. In the case of basis compounds containing methylphosphorus groups the state of development of industrially interesting processes is also outlined. In addition, the synthesis of a few bifunctional phosphorus-carbon compounds which can be employed as comonomers in the production of polymers is described.     

Ein biologischer Vergleich zwischen Benzol und Pyridin in kondensierten Ringsystemen

The synthesis of imidazo[4,5-b]pyridines and of [1,2,4]-triazolo[1,5-a]pyridines is described, and their biological activity in relation to the standard antiviral substance, 2-(α-hydroxybenzyl)benzimidazol, is discussed.     

(Benzylthio)- und (Arylthio)-substituierte Nitril-ylide: Thermische Erzeugung und Reaktionen

Thermal Generation and Reactions of (Benzylthio)-and (Arylthio)-Substituted Nitrile Ylides Thermolysis of 4-(benzylthio)- and 4-(arylthio)-1,3-oxazol-5(2H)-ones 6 , at 110–155° in the presence of dipolarophiles with activated C≡C, C?C, C?O, C?S, and N?N bonds, led to 5-membered cyclo-adducts and CO² (cf. Schemes 3, 5-7). Heating 6a and 6c in the presence of ethyl propiolate yielded ethyl quinoline-3-carboxylate ( 19 ) and ethyl pyridine-3-carboxylate( 22 ), respectively (cf. Scheme 8). These results are rationalized on the basis of the intermediate formation of thio-substituted nitrile ylides of type 7 (cf. Scheme 2), which undergo regioselective 1,3-dipolar cycloadditions with reactive dipolarophiles. In the absence of such a dipolarophile, the nitrile ylides isomerize via a [1,4]-H shift to give 2-aza-1,3-butadienes of type 20 . The latter are trapped in a Diels-Alder reaction with ethyl propiolate (cf. Scheme 8).     

3-(Dimethylamino)-2,2-dimethyl-2H-azirin als α-Aminoisobuttersäure(Aib)-Äquivalent: Cyclische Depsipeptide durch direkte Amid-Cyclisierung

3-(Dimethylamino)-2,2-dimethyl-2H,-azirine as an α-Aminoisobutyric-Acid (Aib) Equivalent: Cyclic Depsipeptides via Direct Amid Cyclization In MeCN at room temperature, 3-(dimethylamino)-2,2-dimethyl-2H-azirine ( 1 ) and α-hydroxycarboxylic acids react to give diamides of type 8 (Scheme 3). Selective cleavage of the terminal N,N-dimethylcarboxamide group in MeCN/H₂O leads to the corresponding carboxylic acids 13 (Scheme 4). In toluene/Ph SH , phenyl thioesters of type 11 are formed (see also Scheme 5). Starting with diamides 8 , the formation of morpholin-2,5- diones 10 has been achieved either by direct amide cyclization via intermediate 1,3-oxazol-5(4H)-ones 9 or via base-catalyzed cyclization of the phenyl thioesters 11 (Scheme 3). Reaction of carboxylic acids with 1 , followed by selective amide hydrolysis, has been used for the construction of peptides from α-hydroxy carboxylic acids and repetitive α-aminoisobutyric-acid (Aib) units (Scheme 4). Cyclization of 14a, 17a , and 20a with HCI in toluene at 100° gave the 9-, 12-, and 15-membered cyclic depsipeptides 15, 18 , and 21 , respectively.     

Beiträge zur Chemie der Pyrrolpigmente, 26. Mitt.: Zur anaeroben Photochemie von Gallenpigmenten: Die Lumineszenz von Gallenpigment-Partialstruktursystemen und integralen Farbstoffen

The luminescence properties of about twentyfive model compounds representing the three main partial structures of bile pigments (namely pyrromethenes, pyrromethenones and methylenepyrrolylmethylenepyrrolinones) as well as tripyrrines and the geometrical isomers of aetiobiliverdin-IV- are reported. In these compounds there is usually only a very faint or even no fluorescence and phosphorescene as the pathway of deexcitation. Vibrational internal conversion and photoisomerizations at the exocyclic double bonds are the main anaerobic paths of radiationless decay of the excited states.

H. Falk, K. Grubmayr, E. Haslinger, T. Schlederer undK. Thirring, Mh. Chem.109, 1451 (1978).     

1,6-dithia-spiro[4.4]nonadiene aus 2-thiazolin-5-thionen

4,4-Dimethyl-2-phenyl-2-thiazolin-5-thione ($\text{4}$) reacts with 2,3-diphenylcyclopropenone ($\text{2a}$) at 145°C and with benzonitrilio-2-propanide ($\text{6}$) at room temperature to yield the 1,6-dithia-spiro[4.4]nonadienes $\text{5}$ and $\text{7}$, respectively.     

Beiträge zur Chemie der Pyrrolpigmente, 19. Mitt.: Die elektrochemische Oxidation von Pyrromethenonen und Pyrromethenen (Gallenpigment-Partialstrukturen)

The electrochemical oxidation of arylmethylene-pyrrolinones, pyrromethenones and pyrromethenes as representative bile pigment partial structure models was investigated by means of a rotating disc platinum electrode using acetonitrile as the solvent. Two different oxidation reactions were found. The first reaction being a reversible one-electron oxidation with compounds of the arylmethylene-pyrrolinone series and pyrromethenones which are unsubstituted in position 5 of the pyrrole ring. A two step reaction (the first one reversible, the second irreversible) on the other hand was found to be typical for pyrromethenones bearing a methyl group in this position.Through protonation the first step is at a higher potential, whereas the second one is lowered and becomes reversible. The resulting oxidation pattern can be interpreted analogous to the oxidation of hydroquinones in aprotic solvents.The geometrical isomers of a pyrromethenone were oxidized at appr. the same potential, but there is a strong dependence of the potential of the first oxidation step on the substitution: a higher degree of alkylation favours oxidation by lowering the oxidation potential.

---

---

Mit 1 Abbildung     

Beitr?ge zur Bestimmung von Spurenverunreinigungen in UO2-Kernbrennstoff

Zusammenfassung Die für die Bestimmung geringer Gehalte an Phosphor, Silicium, Fluor, Chlor, Lithium, Natrium, Calcium und Kohlenstoff in UO₂-Kernbrennstoff angewandten chemischen Analysenverfahren werden beschrieben. Durch Kombination einfacher und blindwertfreier Abtrennungsverfahren (Extraktionen und Pyrohydrolysen) mit empfindlichen physikalischchemischen Bestimmungsmethoden (Spektralphotometrie, Flammenphotometrie, coulometrische Titration) lassen sich Nachweisgrenzen zwischen 0,1 und 10 ppm bei Probeneinwaage von 0,5–1 g UO₂ erreichen. Der Zeitaufwand für die Analysen kann durch simultane Bestimmung zweier oder dreier Elemente in einem Arbeitsgang niedriggehalten werden. Die beschriebenen Verfahren haben sich bei Reinheitskontrollen von Kernbrennstoffen gut bewährt.

---

Summary Analytical methods have been developed for the determination of trace amounts of phosphorus, silicon, fluorine, chlorine, lithium, sodium, calcium, and carbon in UO₂ of nuclear purity. By combination of simple and rapid separation procedures (extraction, pyrohydrolysis) with highly sensitive methods of determination (spectrophotometry, flame photometry, coulometric titration) detection limits of 0.1–10 ppm have been obtained with sample sizes of 0.5–1 g. In order to reduce the time needed for analysis, some of the above elements are determined simultaneously. The methods described have been successfully applied to the purity control of nuclear fuels.

---

---

Herrn Dr. W. Gebauhr danken wir für wertvolle Anregungen und Diskussionen.