Stability testing in an integrated scheme

ISO Guide 35 deals with RM stability issues and scrutinizes the evaluation of stability testing results under the assumption that either there is no trend at all (a rather rare situation), or any observed deterministic change is insignificant and thus can be neglected. However, market demands for reliable reference materials are obviously not limited to stable or at least seemingly stable materials. In many analytical applications, analytes and measurands under consideration are known, or at least suspected, to be unstable on time scales that may vary widely from measurand to measurand. The Federal Institute for Materials Research and Testing (BAM) has developed (and successfully uses) an integrated approach in its certification practice. The approach is based on an initial stability study and subsequent post-certification monitoring. Data evaluation is model-based and takes advantage of all information collected in the stability testing scheme(s). It thus allows one to deal with any kind of instability observed, to assess limiting time intervals at any stress condition in the range tested, to estimate a final expiry date for materials with detected instabilities or the maximum admissible re-testing interval for seemingly stable materials, and to assess maximum admissible stress loads during delivery of the material to the customer. The article describes (and exemplifies) typical study layout, the model selection, and the integrated data assessment.     

Monitoring of NO2 in the ambient air with passive samplers before and after a road reconstruction event

Nitrogen dioxide (NO₂) concentrations were used to evaluate the air quality before and after the infrastructural change of an important traffic artery in Mortsel, Antwerp (Belgium). During the reconstruction works two pairs of traffic lanes were reduced to one in each direction. Two sampling campaigns were conducted: the first one before the works in 2003 and the second one in 2005, after the road works were finished. Sampling was performed on a weekly base with the use of passive diffusion tubes on the streets, and also indoors in nearby houses. The samples were analyzed by ion chromatography, from which data the NO₂ concentrations in air could be calculated. These results were compared with NO₂ values from the air monitoring station 42R801 of the Flemish Environment Agency in Borgerhout, Antwerp. On the base of different NO₂ concentrations, correlated well with the traffic density, sampling locations were classified into three groups as follows: 1) ‘heavily polluted’ (heavy traffic); 2) ‘moderately polluted’ (medium traffic); or 3) ‘less polluted’ (low traffic density). Sampling sites located further from the road works, enclosed to the group ‘less polluted’, showed the lowest NO₂ concentrations. The highest NO₂ level was found for the locations close to reconstruction works, which belonged to the group ‘heavily polluted’. The contribution of NO₂ was at the same level before and after the road works. During the first campaign it ranged from 30 ± 7 µg/m³ to 71 ± 11 µg/m³ and during the second sampling it was between 36 ± 17 µg/m³ and 73 ± 17 µg/m³. These modernization works had no impact on preventing the traffic-related pollutant as NO₂ and as a consequence no significant effect on the air quality in the studied region. It has been proven that the impact of traffic on the air quality is unmistakably high and simply reduction of the number of the traffic lanes, intended to discourage the traffic flow, had apparently no environmentally advantageous effect.     

Effect of ionic liquid on dielectric, mechanical and dynamic mechanical properties of multi-walled carbon nanotubes/polychloroprene rubber composites

This paper focuses on the influence of ionic liquid on carbon nanotube based elastomeric composites. Multi-walled carbon nanotubes (MWCNTs) are modified using an ionic liquid at room temperature, 1-butyl 3-methyl imidazolium bis (trifluoromethylsulphonyl) imide (BMI) and modified MWCNTs exhibit physical (cation–π/π–π) interaction with BMI. The polychloroprene rubber (CR) composites are prepared using unmodified and BMI modified MWCNTs. The presence of BMI not only increases the alternating current (AC) electrical conductivity and polarisability of the composites but also improves the state of dispersion of the tubes as observed from dielectric spectroscopy and transmission electron microscopy respectively. In addition to the hydrodynamic reinforcement, the formation of improved filler–filler networks is reflected in the dynamic storage modulus (E′) for modified MWCNTs/CR composites in amplitude sweep measurement upon increasing the proportion of BMI. Hardness and mechanical properties are also studied for the composites as a function of BMI.     

Conformational dependence of pyranoid rings 1,2-cis-fused to dioxolane rings on the configuration of the dioxolane rings in acetylated derivati

X-Ray and ¹H N.M.R. studies on pyranoid rings 1,2-$\text{cis}$-fused to dioxolane rings in acetylated $\text{D}$-gluco- and $\text{D}$--galactopyranose derivatives demonstrate that the configuration of the dioxolane ring influences the conformation of the pyranoid ring in the $\text{D}$-gluco but not in the $\text{D}$-galactopyranose series. The crystal structure of 3,4,6-tri-$\text{O}$-acetyl-1,2-$\text{O}$-(R)--(l-cyano-ethylidene)-α-$\text{D}$-glucopyranose ($\text{1}$) and 3,4,6-tri-$\text{O}$-acetyl-1,2-$\text{O}$-($\text{R}$)-(1-cyano-ethylidene)-α-$\text{D}$-galactopyranose ($\text{2}$)have been determined by X-ray analysis. Lattice parameters for $\text{1}$ are a=20.6021 (11), b=8.0438 (2), c=5.5541 (1) Å and β= 95.588 (3)° for a cell with P21 symmetry. These parameters for $\text{2}$ are a=20.3361 (7), b=10.0907 (2), c=18.9115 (5) Å, β =112.399 (2)°, C2, with two crystallographycally independent molecules. The conformation of the pyranoid ring in both compounds can be described as flattened ⁴C₁ and that of the dioxolane ring as distorted E₁. The importance of the torsion angles for describing problems of configuration is remarked and the use of relative configurational angles is stressed. The ¹H N.M.R. spectra of $\text{1}$ and $\text{2}$ and 3,4,6-tri-$\text{O}$-acetyl-1,2-O-(S)- and (R)-ethylidene-α-$\text{D}$-glucopyranose ($\text{5}$ and $\text{7}$), 3,4,6-tri-O-acetyl--1,2-O-(S)- and ($\text{R}$)-ethylidene-α-$\text{D}$-galactopyranose ($\text{6}$ and $\text{8}$), and 3,4,6-tri-$\text{O}$-acetyl-1,2-$\text{O}$-($\text{S}$)-and ($\text{R}$)-benzylidene-α-$\text{D}$-glucopyranose ($\text{9}$ and $\text{10}$) have been analyzed by using iterative computer methods and N.O.E. measurements. The results indicate that the major solution conformation of the pyranoid ring of the derivatives in the $\text{D}$-gluco series $\text{1}$, $\text{5}$ and $\text{9}$ may be described as flattened ⁴C₁ and that of $\text{7}$ and $\text{10}$ as ²$\text{S}$₅. The major solution conformation of the pyranoid ring in all compounds in the $\text{D}$-galacto series ($\text{2}$,$\text{4}$,$\text{6}$,$\text{8}$) may be described as flattened ⁴$\text{C}$₁.     

One‐Pot Cooperation of Single‐Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization‐Hydrosilylation Process

Realizing the full potential of oxide‐supported single‐atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one‐pot combination of Ru₁/CeO₂ and Rh₁/CeO₂ SACs enables a highly selective olefin isomerization‐hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double‐bond migration and anti‐Markovnikov α‐olefin hydrosilylation, respectively. First‐principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single‐pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio‐selectivity (>95 %) even from industrially‐relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide‐supported single‐atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.     

Aromatic 19F–13C TROSY—[19F, 13C]‐Pyrimidine Labeling for NMR Spectroscopy of RNA

We present the access to [5‐¹⁹F, 5‐¹³C]‐uridine and ‐cytidine phosphoramidites for the production of site‐specifically modified RNAs up to 65 nucleotides (nts). The amidites were used to introduce [5‐¹⁹F, 5‐¹³C]‐pyrimidine labels into five RNAs—the 30 nt human immunodeficiency virus trans activation response (HIV TAR) 2 RNA, the 61 nt human hepatitis B virus ? (hHBV ?) RNA, the 49 nt SAM VI riboswitch aptamer domain from B. angulatum, the 29 nt apical stem loop of the pre‐microRNA (miRNA) 21 and the 59 nt full length pre‐miRNA 21. The main stimulus to introduce the aromatic ¹⁹F–¹³C‐spin topology into RNA comes from a work of Boeszoermenyi et al., in which the dipole‐dipole interaction and the chemical shift anisotropy relaxation mechanisms cancel each other leading to advantageous TROSY properties shown for aromatic protein sidechains. This aromatic ¹³C–¹⁹F labeling scheme is now transferred to RNA. We provide a protocol for the resonance assignment by solid phase synthesis based on diluted [5‐¹⁹F, 5‐¹³C]/[5‐¹⁹F] pyrimidine labeling. For the 61 nt hHBV ? we find a beneficial ¹⁹F–¹³C TROSY enhancement, which should be even more pronounced in larger RNAs and will facilitate the NMR studies of larger RNAs. The [¹⁹F, ¹³C]‐labeling of the SAM VI aptamer domain and the pre‐miRNA 21 further opens the possibility to use the biorthogonal stable isotope reporter nuclei in in vivo NMR to observe ligand binding and microRNA processing in a biological relevant setting.     

Amino Acid Modified RNA Bases as Building Blocks of an Early Earth RNA-Peptide World

Fossils of extinct species allow us to reconstruct the process of Darwinian evolution that led to the species diversity we see on Earth today. The origin of the first functional molecules able to undergo molecular evolution and thus eventually able to create life, are largely unknown. The most prominent idea in the field posits that biology was preceded by an era of molecular evolution, in which RNA molecules encoded information and catalysed their own replication. This RNA world concept stands against other hypotheses, that argue for example that life may have begun with catalytic peptides and primitive metabolic cycles. The question whether RNA or peptides were first is addressed by the RNA-peptide world concept, which postulates a parallel existence of both molecular species. A plausible experimental model of how such an RNA-peptide world may have looked like, however, is absent. Here we report the synthesis and physicochemical evaluation of amino acid containing adenosine bases, which are closely related to molecules that are found today in the anticodon stem-loop of tRNAs from all three kingdoms of life. We show that these adenosines lose their base pairing properties, which allow them to equip RNA with amino acids independent of the sequence context. As such we may consider them to be living molecular fossils of an extinct molecular RNA-peptide world.     

Bidirectional "ping-pong" energy transfer and 3000-fold lifetime enhancement in a Re(I) charge transfer complex

The synthesis and photophysics of a new Re(I)-carbonyl diimine complex, Re(PNI-phen)(CO)(3)Cl, where the PNI-phen is N-(1,10-phenanthroline)-4-(1-piperidinyl)naphthalene-1,8-dicarboximide is reported. The metal-to-ligand charge transfer (MLCT) emission lifetime was increased approximately 3000-fold at room temperature with respect to that of the model complex [Re(phen)(CO)(3)Cl] as a result of thermal equilibrium between the emissive (3)MLCT state and a long-lived triplet ligand-centered ((3)LC) state on the PNI chromophore. This represents the longest excited state lifetime (τ = 651 μs) that has ever been observed for a Re(I)-based CT photoluminescence at room temperature. The energy transfer processes and the associated rate constants leading to the establishment of the excited state equilibrium were elucidated by a powerful combination of three techniques (transient visible and infrared (IR) absorption and photoluminescence), each applied from ultrafast to the micro/milliseconds time scale. The MLCT excited state was monitored by transient IR using CO vibrations through time intervals where the corresponding signals obtained in conventional visible transient absorption were completely obscured by overlap with strong transients originating from the pendant PNI chromophore. Following initial excitation of the (1)LC state on the PNI chromophore, energy is transferred to form the MLCT state with a time constant of 45 ps, a value confirmed in all three measurement domains within experimental error. Although transient spectroscopy confirms the production of the (3)MLCT state on ultrafast time scales, Fo?rster resonance energy transfer calculations using the spectral properties of the two chromophores support initial singlet transfer from (1)PNI* to produce the (1)MLCT state by the agreement with the experimentally observed energy transfer time constant and efficiency. Intersystem crossing from the (1)MLCT to the (3)MLCT excited state is believed to be extremely fast and was not resolved with the current experiments. Finally, triplet energy was transferred from the (3)MLCT to the PNI-centered (3)LC state in less than 15 ns, ultimately achieving equilibrium between the two excited states. Subsequent relaxation to the ground state occurred via emission resulting from thermal population of the (3)MLCT state with a resultant lifetime of 651 μs. The title chromophore represents an interesting example of "ping-pong" energy transfer wherein photon excitation first migrates away from the initially prepared (1)PNI* excited state and then ultimately returns to this moiety as a long-lived excited triplet which disposes of its energy by equilibrating with the photoluminescent Re(I) MLCT excited state.     

Phenanthrene-fused azo-ene-ynes: synthesis of dibenzo[f,h]cinnoline and dibenzo[e,g]isoindazole derivatives

The cyclization reactions of a phenanthreno-fused azo-ene-yne compound have been studied both experimentally and computationally. Experimental results show that this system is prone to dimerization, more so than previously studied naphthalene- and benzene-based analogues. Calculations reveal that pyrazoles and arene-fused pyrazoles strongly stabilize carbenes in the 5-position through "coarctate conjugation", suggesting a stationary concentration of the carbenes/carbenoids during cyclization that is high enough for dimerization.     

Self-assembly of supramolecular architectures and polymers by orthogonal metal complexation and hydrogen-bonding motifs

A modular construction kit with two orthogonal noncovalent binding sites for self-assembly of supramolecular architectures is presented. The heteroditopic building blocks contain a terpyridine (tpy) unit for coordination of metal ions and a Hamilton receptor for multiple H-bonding of cyanuric acid derivatives. The association constants of ligand binding of M(II) complexes (M=Ru, Zn, Fe, and Pt) with a dendritic end cap were determined to be in the range of 10(2) and 10(4) L mol(-1) in chloroform. The capabilities for binding of metal ions were investigated by (1)H NMR and UV/Vis spectroscopy. The Fe complexes are most appropriate for the generation of discrete and high-ordered architectures due to their strong tendency to form FeL(2) complexes. Superstructures are readily formed in a one-pot procedure at room temperature. No mutual interactions between the orthogonal binding motifs were observed, and this demonstrates the highly specific nature of each binding process. Decomplexation experiments were carried out to examine the reversibility of Fe-tpy coordination. Substitution of the terminal end cap with a homoditopic bis-cyanurate linkage leads to formation of an iron-containing supramolecular strand. Formation of coordination polymers was confirmed by viscosity measurements. The supramolecular polymer strands can be reversibly cleaved by addition of a terminating cyanuric acid building block, and this proves the dynamic nature of this noncovalent polymerization process.