Quantification of triacylglycerol regioisomers in oils and fat using different mass spectrometric and liquid chromatographic methods

The regioisomers (sn-ABA/sn-AAB) of four triacylglycerols (TAGs), 18:2/18:2/18:1 (LLO), 18:2/18:1/18:1 (LOO), 16:0/18:1/18:1 (POO), and 16:0/16:0/18:1 (PPO), were quantified in lard, rapeseed oil, and sunflower seed oil by three different mass spectrometric methods using liquid chromatography (LC) and two different mass spectrometers. The ionization methods used were positive ion atmospheric pressure chemical ionization (APCI), positive ion electrospray ionization (ESI), and negative ion chemical ionization (NICI) with ammonia as the reagent gas. The LC/APCI-MS results with two different instrumentation types, LC/ESI-MS/MS and direct inlet ammonia NICI-MS/MS, were compared. The LC/APCI-MS method is based on the preferential formation of diacylglycerol (DAG) fragment ions during ionization by loss of sn-1/3 fatty acids from [M+H]+ ions. Similar formation of the DAG ions from [M+NH4]+ ions by collision-induced dissociation (CID) in the LC/ESI-MS/MS method and the [M-H--RCOOH-100]- ions from [M-H]- ions by CID in the direct inlet ammonia NICI-MS/MS method is observed. These methods were found to be useful and reliable in determining the regioisomeric structure of TAGs. No statistically significant differences were found between the results obtained with these methods. For LLO, LOO, and POO the proportions of sn-ABA isomer calculated from the results from all four methods were in rapeseed oil 7.7 +/- 6.5, 57.9 +/- 3.3, and 4.5 +/- 6.1%, respectively, and in sunflower seed oil 12.2 +/- 6.9, 34.0 +/- 5.2, and 1.4 +/- 2.8%, respectively. The proportions of ABA of POO and PPO in lard were 95.3 +/- 3.2 and 4.9 +/- 5.6%, respectively. This study also proved that the LC/APCI-MS/MS method examined is not applicable in the quantification of TAG regioisomers because the formation of DAG ions is not clearly dependent on the positional distribution of the fatty acids.     

Adipic and malonic acid aqueous solutions: surface tensions and saturation vapor pressures

The surface tension of adipic aqueous solutions was measured as a function of temperature (T=278-313 K) and adipic acid mole fraction (X=0.000-0.003) using the Wilhelmy plate method. A parametrization fitted to these data is presented. The evaporation rates of binary water-malonic and water-adipic acid droplets were measured with a TDMA technique at different temperatures (T=293-300 K) and relative humidities (58-80%), and the saturation vapor pressures of subcooled liquid malonic and adipic acids were derived from the data using a binary evaporation model. The temperature dependence of the vapor pressures was obtained as least-squares fits to the derived vapor pressures: ln(Psat,l) (Pa)=220.2389-22634.96/T (K)-26.66767 ln T (K) for malonic acid and ln(Psat,l) (Pa)=140.6704-18230.97/T (K)-15.48011 ln T (K) for adipic acid.     

Recent advances in polymer protected gold nanoparticles: synthesis, properties and applications

The use of various functionalized polymers as stabilizers to design metal core-organic shell hybrid nanoparticle architectures has attracted increasing interest for different applications. The feature article reviews recent reports published from 2004 to the beginning of 2007 on the synthesis of polymer protected gold nanoparticles (AuNPs), and also comments their properties and applications.     

UV‐Vis Spectroscopy Reveals a Correlation Between Y263 and BV Protonation States in Bacteriophytochromes

Red‐light photosensory proteins, phytochromes, link light activation to biological functions by interconverting between two conformational states. For this, they undergo large‐scale secondary and tertiary changes which follow small‐scale Z to E bond photoisomerization of the covalently bound bilin chromophore. The complex network of amino acid interactions in the chromophore‐binding pocket plays a central role in this process. Highly conserved Y263 and H290 have been found to be important for the photoconversion yield, while H260 has been identified as important for bilin protonation and proton transfer steps. Here, we focus on the roles these amino acids are playing in preserving the chemical properties of bilin in the resting Pr state of the photosensory unit of a bacteriophytochrome from Deinococcus radiodurans. By using pH‐dependent UV‐Vis spectroscopy and spectral decomposition modeling, we confirm the importance of H260 for biliverdin protonation. Further, we demonstrate that in the canonical bacteriophytochromes, the pK_a value of the phenol group of the Y263 is uncommonly low. This directly influences the protonation of the bilin molecule and likely the functional properties of the protein. Our study expands the understanding of the tight interplay between the nearby amino acids and bilin in the phytochrome family.     

Aggregation and protein binding of sodium maleate copolymers with varying hydrophobicities

Copolymers of sodium maleate with methyl methacrylate, styrene, or vinyl acetate have been synthesized and studied in aqueous NaCl solutions of various ionic strengths. The polymers are polyelectrolytes with varying hydrophobicities, and their solution properties have been studied using static and dynamic light scattering. Copolymers containing methyl methacrylate or styrene were shown to aggregate in water upon increasing salt concentration. Copolymers of sodium maleate and vinyl acetate do not associate with increasing ionic strength. The binding of bovine serum albumin and cytochrome C to the sodium maleate copolymers was also investigated by light scattering. It was observed that cytochrome C forms complexes with the copolymers containing methyl methacrylate or vinyl acetate whereas albumin does not bind to any of the copolymers studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Continuous chromatographic protein refolding

Column-based protein refolding requires a continuous processing capability if reasonable quantities of protein are to be produced. A popular column-based method, size-exclusion chromatography (SEC) refolding, employs size-exclusion matrices to separate unfolded protein from denaturant, thus refolding the protein. In this work, we conduct a comparison of SEC refolding with refolding by batch dilution, using lysozyme as a model protein. Lysozyme refolding yield was found to be extremely sensitive to the chemical composition of the refolding buffer and particularly the concentration of dithiothreitol (DTT) introduced from the denatured protein mixture. SEC refolding was not adversely affected by DTT carry-over as small contaminants in the denatured solution are separated from protein during the refolding operation. We also find that, contrary to previous reports, size-exclusion refolding on batch columns leads to refolding yields slightly better than batch dilution refolding yields at low protein concentrations but this advantage disappears at higher protein concentrations. As batch-mode chromatography would be the limiting step in a column based refolding downstream process, the batch column refolding method was translated to a continuously operating chromatography system (preparative continuous annular chromatography, P-CAC). It was shown that the P-CAC elution profile is similar to that of a stationary column, making scale-up and translation to P-CAC relatively simple. Moreover, it was shown that high refolding yields (72%) at high protein concentration (>1 mg ml(-1)) could be obtained.     

Oligoamide Foldamers as Helical Chloride Receptors—the Influence of Electron‐Withdrawing Substituents on Anion‐Binding Interactions

The anion‐binding properties of three closely related oligoamide foldamers were studied using NMR spectroscopy, isothermal titration calorimetry and mass spectrometry, as well as DFT calculations. The ¹H NMR spectra of the foldamers in [D₆]acetone solution revealed partial preorganization by intramolecular hydrogen bonding, which creates a suitable cavity for anion binding. The limited size of the cavity, however, enabled efficient binding by the inner amide protons only for the chloride anion resulting in the formation of a thermodynamically stable 1:1 complex. All 1:1 chloride complexes displayed a significant favourable contribution of the entropy term. Most likely, this is due to the release of ordered solvent molecules solvating the free foldamer and the anion to the bulk solution upon complex formation. The introduction of electron‐withdrawing substituents in foldamers 2 and 3 had only a slight effect on the thermodynamic constants for chloride binding compared to the parent receptor. Remarkably, the binding of chloride to foldamer 3 not only produced the expected 1:1 complex but also open aggregates with 1:2 (host:anion) stoichiometry.     

Experimental and theoretical investigations of tellurium(IV) diimides and imidotelluroxanes: X-ray structures of B(C6F5)3 adducts of OTe(mu-NtBu)2TeNtBu, [OTe(mu-NtBu)2Te(mu-O)]2 and tBuNH2

The hydrolysis of (t)BuNTe(mu-N(t)Bu)(2)TeN(t)Bu (1) with 1 or 2 equiv of (C(6)F(5))(3)B.H(2)O results in the successive replacement of terminal imido groups by oxo ligands to give the telluroxane-Lewis acid adducts (C(6)F(5))(3)B.OTe(mu-N(t)Bu)(2)TeN(t)Bu (2) and [(C(6)F(5))(3)B.OTe(mu-N(t)Bu)(2)Te(mu-O)](2) (3), which were characterized by multinuclear NMR spectroscopy and X-ray crystallography. The Te=O distance in 2 is 1.870(2) A. The di-adduct 3 involves the association of four (t)()BuNTeO monomers to give a tetramer in which both terminal Te=O groups [d(TeO) = 1.866(3) A] are coordinated to B(C(6)F(5))(3). The central Te(2)O(2) ring in 3 is distinctly unsymmetrical [d(TeO) = 1.912(3) and 2.088(2) A]. The X-ray structure of (C(6)F(5))(3)B.NH(2)(t)()Bu (4), the byproduct of these hydrolysis reactions, is also reported. The geometries and energies of tellurium(IV) diimides and imido telluroxanes were determined using quantum chemical calculations. The calculated energies for the reactions E(NR)(2) + Te(NR)(2) (E = S, Se, Te; R = H, Me, (t)Bu, SiMe(3)) confirm that cyclodimerization of tellurium(IV) diimides is strongly exothermic. In the mixed-chalcogen systems, the cycloaddition is energetically favorable for the Se/Te combination. The calculated energies for the further oligomerization of the dimers XE(mu-NMe)(2)EX (E = Se, Te; X = NMe, O) indicate that the formation of tetramers is strongly exothermic for the tellurium systems but endothermic (X = NMe) or thermoneutral (X = O) for the selenium systems, consistent with experimental observations.