Diffuse-reflectance laser flash photolysis of 16-(1-pyrene)-hexadecanoic acid adsorbed on silica

The absorption and fluorescence of 16-(1-pyrene)-hexadecanoicacid adsorbed on silica have been investigated. Time-resolved transient diffuse reflectance spectra were recorded following pulsed nanosecond laser excitation at 355 nm of pyrene, 1-methylpyrene and 16-(1-pyrene)-hexadecanoicacid adsorbed on silica. In addition to a rapidly decaying transient, absorbing at 420 nm assigned as the triplet state, and of the radical cation, absorbing at 460 nm, another long living transient species absorbing at 420 nm was observed for 16-(1-pyrene)-hexadecanoic acid. The decay is reversible but complete recovery takes several hours. Although no definitive assignment could be made for this transient several possibilities are discussed. The radical cations of the investigated molecules are formed by a biphotonic process. The non-exponential decay of the radical cations could be analyzed in the framework of a Gaussian distribution of free energy barriers.     

Topological study of intramolecular hydrogen bonding in beta-hydroxyethylperoxy radical and beta-hydroxyethoxy radical along its dissociation pathway

The presence of intramolecular hydrogen bond (IHB) in beta-hydroxyethylperoxy and beta-hydroxyethoxy radicals was investigated using the QTAIM topological study on UB3LYP/6-311++G(2d,2p) charge densities. Only one of the two conformers of beta-hydroxyethylperoxy radical which were previously considered to present IHB displays a bond critical point (BCP) associated to an IHB. Furthermore, the atomic energies and electron populations indicate no evidence of IHB in the second conformer. Nevertheless, very small differences in molecular energies were obtained using several one-step and multi-step methods (G3, G3B3) between both conformers. No BCP is found between the hydroxyl hydrogen and the oxygen in the most stable conformer or in the transition state for the dissociation path of beta-hydroxyethoxy radical. However, a BCP is formed in the last steps of this path, thereby yielding H-bonded products.     

Electron microscopic study of dehydration transformations. I. Twin formation and mosaic structure in hematite derived from goethite

A study by means of electron microscopy at high resolution has enabled the analysis of the microstructure of hematite as produced by dehydration from goethite. The apparently “polycrystalline” structure is found to consist of aggregates of well-oriented twin-related hematite crystals, separated by regularly spaced H(001) walls of voids resulting from the loss of water. The material is thus broken up into blocks with sizes smaller than 50 Å. The crystallography of the twinned structure can be analyzed by electron diffraction data and dark-field imaging. These aggregates of hematite crystals provide an ideal mosaic structure. In particular the effect of this mosaic structure on the individual reflections of the diffraction patterns has been analyzed and discussed.     

Mechanism of inactivation of inducible nitric oxide synthase by amidines. Irreversible enzyme inactivation without inactivator modification

Nitric oxide synthases (NOS) are hemoproteins that catalyze the reaction of L-arginine to L-citrulline and nitric oxide. N-(3-(Aminomethyl)benzyl)acetamidine (1400W) was reported to be a slow, tight-binding, and highly selective inhibitor of iNOS in vitro and in vivo. Previous mechanistic studies reported that 1400W was recovered quantitatively after iNOS fully lost its activity and modification to iNOS was not detected. Here, it is shown that 1400W is a time-, concentration-, and NADPH-dependent irreversible inactivator of iNOS. HPLC-electrospray mass spectrometric analysis of the incubation mixture of iNOS with 1400W shows both loss of heme cofactor and formation of biliverdin, as was previously observed for iNOS inactivation by another amidine-containing compound, N5-(1-iminoethyl)-L-ornithine (L-NIO). The amount of biliverdin produced corresponds to the amount of heme lost by 1400W inactivation of iNOS. A convenient MS/MS-HPLC methodology was developed to identify the trace amount of biliverdin produced by inactivation of iNOS with either 1400W or L-NIO to be biliverdin IXalpha out of the four possible regioisomers. Two mechanisms were previously proposed for iNOS inactivation by L-NIO: (1) uncoupling of the heme peroxide intermediate, leading to destruction of the heme to biliverdin; (2) abstraction of a hydrogen atom from the amidine methyl group followed by attachment to the heme cofactor, which causes the enzyme to catalyze the heme oxygenase reaction. The second mechanistic proposal was ruled out by inactivation of iNOS with d3-1400W, which produced no d2-1400W. Detection of carbon monoxide as one of the heme-degradation products further excludes the covalent heme adduct mechanism. On the basis of these results, a third mechanism is proposed in which the amidine inactivators of iNOS bind as does substrate L-arginine, but because of the amidine methyl group, the heme peroxy intermediate cannot be protonated, thereby preventing its conversion to the heme oxo intermediate. This leads to a change in the enzyme mechanism to one that resembles that of heme oxygenase, an enzyme known to convert heme to biliverdin IXalpha. This appears to be the first example of a compound that causes irreversible inactivation of an enzyme without itself becoming modified in any way.     

Current mass spectrometry strategies for selenium speciation in dietary sources of high-selenium

This document reviews the most relevant mass spectrometry approaches to selenium (Se) speciation in high-Se food supplements in terms of qualitative and quantitative Se speciation and Se-containing species identification, with special reference to high-Se yeast, garlic, onions and Brazil nuts. Important topics such as complexity of Se speciation in these materials and the importance of combining Se-specific detection and molecule-specific determination of the particular species of this element in parallel with chromatography, to understand their nutritional role and cancer preventive properties are critically discussed throughout. The versatility and potential of mass spectrometric detection in this field are clearly demonstrated. Although great advances have been achieved, further developments are required, especially if speciatedcertified reference materials (CRMs) are to be produced for validation of measurements of target Se-containing species in Se-food supplements.     

Platinum chromophore-based systems for photoinduced charge separation: a molecular design approach for artificial photosynthesis

Photoinduced charge separation is a fundamental step in photochemical energy conversion. In the design of molecularly based systems for light-to-chemical energy conversion, this step is studied through the construction of two- and three-component systems (dyads and triads) having suitable electron donor and acceptor moieties placed at specific positions on a charge-transfer chromophore. The most extensively studied chromophores in this regard are ruthenium(II) tris(diimine) systems with a common 3MLCT excited state, as well as related ruthenium(II) bis(terpyridyl) systems. This Forum contribution focuses on dyads and triads of an alternative chromophore, namely, platinum(II) di- and triimine systems having acetylide ligands. These d8 chromophores all possess a 3MLCT excited state in which the lowest unoccupied molecular orbital is a pi orbital on the heterocyclic aromatic ligand. The excited-state energies of these Pt(II) chromophores are generally higher than those found for the ruthenium(II) tris(diimine) systems, and the directionality of the charge transfer is more certain. The first platinum diimine bis(arylacetylide) triad, constructed by attaching phenothiazene donors to the arylacetylide ligands and a nitrophenyl acceptor to 5-ethynylphenanthroline of the chromophore, exhibited a charge-separated state of 75-ns duration. The first Pt(tpy)(arylacetylide)+-based triad contains a trimethoxybenzamide donor and a pyridinium acceptor and has been structurally characterized. The triad has an edge-to-edge separation between donor and acceptor fragments of 27.95 Angstroms. However, while quenching of the emission is complete for this system, transient absorption (TA) studies reveal that charge transfer does not move onto the pyridinium acceptor. A new set of triads described in detail here and having the formula [Pt(NO2phtpy)(p-C triple-bond C-C6H4CH2(PTZ-R)](PF6), where NO2phtpy = 4'-{4-[2-(4-nitrophenyl)vinyl]phenyl}-2,2';6',2'-terpyridine and PTZ = phenothiazine with R = H, OMe, possess an unsaturated linkage between the chromophore and a nitrophenyl acceptor. While the parent chromophore [Pt(ttpy)(C triple-bond CC6H5)]PF6 is brightly luminescent in a fluid solution at 298 K, the triads exhibit complete quenching of the emission, as do the related donor-chromophore (D-C) dyads. Electrochemically, the triads and D-C dyads exhibit a quasi-reversible oxidation wave corresponding to the PTZ ligand, while the R = H triad and related C-A dyad display a facile quasi-reversible reduction assignable to the acceptor. TA spectroscopy shows that one of the triads possesses a long-lived charge-separated state of approximately 230 ns.     

Liquid-liquid phase equilibria for some polystyrene-methylcyclohexane mixtures

Liquid-liquid cloud point diagrams of solutions of nearly monodisperse samples of polystyrene (PS), and binary mixtures of nearly monodisperse PS’s, both in methylcyclohexane (MCH), were determined for several polymer molecular weights (M_w) at 0.1 MPa. The bimodal mixtures (PS[M_w(1),ρ(1)] + PS[M_w(2),ρ(2)], M_w(1)=90×10³ g/mol, M_w(2)=13×10³ g/mol, 5.78 × 10³ g/mol, and 2.2 × 10³ g/mol, ρ=1.06) were prepared constraining 〈M_w〉=38.6×10³ g/mol, ρ=M_w/M_n is the polydispersity index. In each case the cloud point curves (CPC’s) for the bimodal mixtures are strongly skewed, lying well above CPC for 〈M_w〉 when φ<φ_CRITICAL, and below CPC for 〈M_w〉 when φ>φ_CRITICAL; φ is volume fraction polymer in the polymer/solvent mixture. The experimental results are discussed in the context of empirical and mean-field representations.     

(Cyclopentadienyl)(1-methylallyl)(butadiene)titanium

(Cyclopentadienyl)(1-methylallyl)(butadiene)titanium, C₁₃H₁₈Ti, has been obtained from the reaction between (C₅H₅)TiCl₃ or (C₅H₅)TiCl₂ and 1-methylallylmagnesium bromide in ether. The brown compound is diamagnetic and thermally stable, but very sensitive to oxygen. The nature of the new compound has been elucidated from its reaction with bromine and by IR, ¹H and ¹³C NMR, and mass spectral analysis.     

Separation of actinides from Low Level Liquid Wastes (LLLW) by extraction chromatography using novel DMDOHEMA and TODGA impregnated resins

The uptake of several actinides [U(VI), Th(IV), Am(III), Cm(III)] and fission products was investigated from nitric acid solutions by two novel extraction chromatographic sorbents containing 2-(2-hexyloxy-ethyl)-N,N'-dimethyl-N,N'-dioctyl-malonamide (DMDOHEMA) and N,N,N',N'-tetraoctyl-3-oxapentane-1,5-diamide (TODGA), respectively. The kinetics of the uptake of actinides was studied. The sorption of metal ions fromz simulated Low Level Liquid Waste (LLLW) solutions was evaluated. The results of these experiments revealed that the actinides and lanthanides could be separated from the bulk of other fission products in simulated LLLW solutions on both sorbents.This revised version was published online in November 2005 with corrections to the Cover Date.     

Thermal conductivity, thermal effusivity, and specific heat capacity near the lower critical point of the binary liquid mixture n-butoxyethanol-water

Experimental investigations on binary liquid mixtures near the critical mixing point are presently leading to a controversy about the anomaly in the thermal conductivity. A photopyroelectric technique is used to determine the thermal conductivity and the effusivity of the binary liquid mixture n-butoxyethanol-water at its critical concentration near the critical mixing point. It is proven that, contrary to previous reports, there is no critical enhancement in the thermal conductivity. The specific heat capacity is calculated from these results and compared with the results from measurements performed by adiabatic scanning calorimetry.