Double-CO3(2-) centered [Co(II)5] wheel and modeling of its magnetic properties

A high-spin Co(II) cluster with a rare pentagonal molecular structure and formula [Co(5)(CO(3))(2)(bpp)(5)]ClO(4) (1; Hbpp is 2,6-bis(phenyliminomethyl)-4-methylphenolate) has been synthesized and characterized by single-crystal X-ray diffraction. This topology arises from fusing five [Co(2)(bpp)] moieties in a cyclic manner around two CO(3)(2-) central ligands, resulting in propeller-like configuration. The irregular coordination of the carbonate ions to the metal centers results in a combination of coordination numbers (CNs) of the Co(II) ions of five and six. The bulk magnetization of this complicated magnetically exchanged system has been modeled successfully by employing a matrix diagonalization technique. For this, the combination of S=3/2 ions (CN=5) with ions exhibiting strong spin-orbit coupling (CN=6) has been considered and a perturbative approach to handle the data in the whole studied range of temperatures (2-300 K) yielding parameters of g and D (for the five-coordinate Co(II) ions), of A, κ, λ, and Δ (for the metals with spin-orbit coupling) and of the exchange constants J. The agreement with results from DFT calculations, also presented here, is remarkable.     

Experimental design in the optimization of a microwave acid digestion procedure for the determination of metals in biomorphic ceramic samples by inductively coupled plasma mass spectrometry and atomic absorption spectrometry

In the present paper, we have synthesized a biomorphic ceramic material from oak wood as biological template structure and infiltration with zirconia-sol. After the material characterization, we have optimized the sample dissolution by acid attack in an oven under microwave irradiation. Experimental designs were used as a multivariate strategy for the effect's evaluation of varying several variables. This article describes the development by response surface methodology (RSM) of a procedure for zirconium determination, and other ions, such as copper and nickel by inductively coupled plasma mass spectrometry (ICP-MS) and others, such as iron, calcium and magnesium determination by flame atomic absorption spectrometry (FAAS) in the synthesized sample after digestion. A full factorial design (3³) was used to find optimal conditions for the procedure through response surface study. Three variables (time, HNO₃ volume and HF volume) were regarded as factors and as response to the concentration of different metal ions in the optimization study.     

Development,validation, and implementation of capillary gel electrophoresis as a replacement for SDS‐PAGE for purity analysis of IgG2 mAbs

Capillary gel electrophoresis (CGE) methods with UV detection were developed for reduced and non‐reduced mAb analysis. These methods can be used to evaluate mAb purity, offering more reproducible quantitation compared with that of traditional SDS‐PAGE methods. These CGE methods have been utilized as platform technology for bioprocess development, formulation development, mAb characterization, drug substance/drug product release testing as well as a required methodology for stability testing. We have found these CGE methods to be applicable across a platform of mAbs in preclinical and clinical development, with the majority of mAbs requiring no modification to the method conditions. This methodology has been ICH validated and transferred to several supporting organizations. The data presented herein describes the development of CGE methodology, platform application to mAb purity analysis, ICH validation, reliability metrics, and considerations on technology enhancement for improved performance and throughput.     

Development of a capillary gel electrophoresis method for monitoring disulfide isomer heterogeneity in IgG2 antibodies

A CGE method for monitoring the disulfide isomer distribution characteristic of IgG2 MAbs is presented. Disulfide heterogeneity of MAbs has been studied using various chromatographic and electrophoretic methods. Although CGE operates using a different selectivity mechanism from that of sorption chromatographic techniques, similar trends are present in the data, which allow the CGE method to be used as a complementary method for studying disulfide isomer distribution. This article focuses on the optimization of a capillary‐based gel electrophoresis method that can be used to support antibody development including bioprocess optimization, antibody characterization, release, and formulation stability assessment.     

Structural characterization of a completely alkyl-substituted Al-Sb Lewis acid-base adduct

The Lewis acid-base adduct t-Bu₃Al-SbMe₃ (1), which was synthesized by reaction of equimolar amounts of t-Bu₃Al and trimethylstibine SbMe₃, was characterized by multinuclear NMR (¹H, ¹³C) spectroscopy, elemental analyses as well as by single crystal X-ray diffraction.     

Mechanisms of TL for production of the 230 °C peak in natural sodalite

The thermoluminescence (TL) peak in natural sodalite near 230 °C, which appears only after submitted to thermal treatments and to gamma irradiation, has been studied in parallel with electron paramagnetic resonance (EPR) spectrum appearing under the same procedure. This study revealed a full correlation between the 230 °C TL peak and the eleven hyperfine lines from EPR spectrum. In both case, the centers disappear at the same temperature and are restored after gamma irradiation. A complete model for the 230 °C TL peak is presented and discussed. In addition to the correlation and TL model, specific characteristics of the TL peaks are described.     

On Discrete groups of automorphisms of \mathbb P ^2_\mathbb{C }

We study the geometry and dynamics of discrete subgroups $\Gamma $ of $\mathrm{PSL}(3,\mathbb C )$ with an open invariant set $\Omega \subset \mathbb P _\mathbb{C }^2$ where the action is properly discontinuous and the quotient $\Omega /\Gamma $ contains a connected component whicis compact. We call such groups quasi-cocompact. In this case $\Omega /\Gamma $ is a compact complex projective orbifold and $\Omega $ is a divisible set. Our first theorem refines classical work by Kobayashi–Ochiai and others about complex surfaces with a projective structure: We prove that every such group is either virtually affine or complex hyperbolic. We then classify the divisible sets that appear in this way, the corresponding quasi-cocompact groups and the orbifolds $\Omega /\Gamma $ . We also prove that excluding a few exceptional cases, the Kulkarni region of discontinuity coincides with the equicontinuity region and is the largest open invariant set where the action is properly discontinuous.     

Energy efficiency and risk management in public buildings: strategic model for robust planning

Due to deregulations of the energy sector and the setting of targets such as the 20/20/20 in the EU, operators of public buildings are now more exposed to instantaneous (short-term) market conditions. On the other hand, they have gained the opportunity to play a more active role in securing long-term supply, managing demand, and hedging against risk while improving existing buildings’ infrastructures. Therefore, there are incentives for the operators to develop and use a Decision Support System to manage their energy sub-systems in a more robust energy-efficient and cost-effective manner. In this paper, a two-stage stochastic model is proposed, where some decisions (so-called first-stage decisions) regarding investments in new energy technologies have to be taken before uncertainties are resolved, and some others (so-called second-stage decisions) on how to use the installed technologies will be taken once values for uncertain parameters become known, thereby providing a trade-off between long- and short-term decisions.     

Fatty Acid Carboxylate‐ and Anionic Surfactant‐Controlled Delivery Systems That Use Mesoporous Silica Supports

We report the preparation of a MCM‐41 mesoporous material that contains the dye [Ru(bipy)₃]Cl₂ (bipy=bipyridine) inside the mesopores and functionalised with suitable binding groups at the entrance of the pores. Solids S1 – S3 were obtained by the reaction of the mesoporous material with N‐methyl‐N′‐propyltrimethoxysilylimidazolium chloride, N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]thiourea, or N‐phenyl‐N′‐[3‐(trimethoxysilyl)propyl]urea, respectively. A study of the dye delivery of these systems in buffered water (pH 7.0, 2‐[4‐(2‐hydroxyethyl)piperazin‐1‐yl]ethanesulfonic acid (HEPES), 10^?3 mol dm^?3) in the presence of a family of carboxylate ions was carried out. In the interaction of the anions with the surface of the solids, the response depends on the characteristics of the binding groups (i.e., imidazolium, urea and thiourea) at the pore outlets and their specific interaction with the corresponding anion. The interaction of long‐chain carboxylate ions with the binding sites at the surface of the solids resulted in a remarkable inhibition of the delivery of the dye. This inhibition was observed clearly for the dodecanoate anion, whereas the octanoate, decanoate, cholate, deoxycholate, glycodeoxycholate and taurocholate anions induced a certain pore blockage that varied according to the solid studied. The interaction of smaller anions, such as acetate, butanoate, hexanoate and octanoate, with the solids had no effect on the dye release process. The possible use of the gating system for the chromo‐fluorogenic detection of anionic surfactants through selective dye delivery inhibition was also explored. Molecular dynamic simulations that use force‐field methods have been made to theoretically study the capping carboxylate mechanism. The calculations are in agreement with the experimental results, thus allowing a representation of the dye delivery inhibition in the presence of long‐chain carboxylate ions.     

Calculated tautomeric equilibria and X-ray structures of 2-substituted N-methoxy-9-methyl-9H-purin-6-amines

Density Functional Theory calculations of nine 2-substituted N-methoxy-9-methyl-9H-purin-6-amines in the amino and imino tautomeric forms, as well as the complexes of the same with dimethyl sulfoxide (DMSO), were performed using two functionals (BP86 and B3LYP) and two basis sets (SV(P) and def2-TZVP). Solid-state structures of two of the compounds were obtained from single-crystal X-ray diffraction techniques. It was found that the inclusion of both an explicit hydrogen-bonding partner (DMSO) as well as continuum solvation effects, and vibrational corrections to energy, were necessary for qualitative and reasonable quantitative agreement with observed tautomeric ratios. The solution-optimized geometries and X-ray structures were found to be in good agreement. NMR spectroscopy confirmed the dependence of the tautomeric ratios on hydrogen-bonding abilities, in addition to the dipole moment of the solvent in question. Natural Bond Orbital charges on the N-7 nitrogen, as well as the tautomeric ratios were used to explain the observed reactivities of the compounds toward N-7 alkylation.