A Ferrofluid with Surface Modified Nanoparticles for Magnetic Hyperthermia and High ROS Production

A ferrofluid with 1,2-Benzenediol-coated iron oxide nanoparticles was synthesized and physicochemically analyzed. This colloidal system was prepared following the typical co-precipitation method, and superparamagnetic nanoparticles of 13.5 nm average diameter, 34 emu/g of magnetic saturation, and 285 K of blocking temperature were obtained. Additionally, the zeta potential showed a suitable colloidal stability for cancer therapy assays and the magneto-calorimetric trails determined a high power absorption density. In addition, the oxidative capability of the ferrofluid was corroborated by performing the Fenton reaction with methylene blue (MB) dissolved in water, where the ferrofluid was suitable for producing reactive oxygen species (ROS), and surprisingly a strong degradation of MB was also observed when it was combined with H₂O₂. The intracellular ROS production was qualitatively corroborated using the HT-29 human cell line, by detecting the fluorescent rise induced in 2,7-dichlorofluorescein diacetate. In other experiments, cell metabolic activity was measured, and no toxicity was observed, even with concentrations of up to 4 mg/mL of magnetic nanoparticles (MNPs). When the cells were treated with magnetic hyperthermia, 80% of cells were dead at 43 °C using 3 mg/mL of MNPs and applying a magnetic field of 530 kHz with 20 kA/m amplitude.     

Investigating sorption-driven dissolved organic matter fractionation by multidimensional fluorescence spectroscopy and PARAFAC

Soil organic matter is involved in many ecosystem processes, such as nutrient supply, metal solubilization, and carbon sequestration. This study examined the ability of multidimensional fluorescence spectroscopy and parallel factor analysis (PARAFAC) to provide detailed chemical information on the preferential sorption of higher-molecular-weight components of natural organic matter onto mineral surfaces. Dissolved organic matter (DOM) from soil organic horizons and tree leaf tissues was obtained using water extracts. The suite of fluorescence spectra was modeled with PARAFAC and it was revealed that the DOM extracts contained five fluorescing components: tryptophan-like (peak location at excitation <255 nm:emission 342 nm), tyrosine-like (276 nm:312 nm), and three humic-substance-like components (<255 nm:456 nm, 309 nm:426 nm, <255 nm:401 nm). In general, adsorption onto goethite and gibbsite increased with increasing DOM molecular weight and humification. PARAFAC analysis of the pre- and post-sorption DOM indicated that the ordering of sorption extent was humic-like components (average 91% sorption) > tryptophan-like components (52% sorption) > tyrosine-like components (29% sorption). This differential sorption of the modeled DOM components in both the soil organic horizon and leaf tissue extracts led to the fractionation of DOM. The results of this study demonstrate that multidimensional fluorescence spectroscopy combined with PARAFAC can quantitatively describe the chemical fractionation process due to the interaction of DOM with mineral surfaces.     

Small-angle X-ray scattering study of liquid crystalline polycarbonates based on α-methyl stilbene mesogen and methylene-containing flexible spacer

Crystallization and melting behavior are studied by small-angle X-ray scattering (SAXS) for a series of recently synthesized monotropic liquid crystalline polycarbonates based on α-methyl stilbene mesogen and methylene flexible spacer. The one-dimensional electron density correlation function is used to obtain long period, crystal thickness, and linear crystallinity from the Lorentz-corrected SAXS intensity. Changes in these parameters during nonisothermal crystallization and melting are explained by a model of dual crystal populations. The primary crystals form first using the liquid crystalline phase as crystal nuclei, while smaller and less perfect crystals form later from the isotropic phase at low temperature. The results of the real-time SAXS study of isothermal crystallization also support the view that the nematic phase serves as crystal nuclei for fast crystallization. An odd-even effect in crystal thickness and linear crystallinity is observed in all the SAXS experiments mentioned above. The results of this study and our complementary wide-angle X-ray scattering (WAXS) investigation show clearly that the difference in the position of the neighboring carbonate dipoles on a chain affects structural organization both at the unit cell level and at the level of the crystal in these monotropic LCPs. © 1995 John Wiley & Sons, Inc.     

Explanation of the glasslike anomaly in the low-temperature specific heat of incommensurate phases

An explanation of the glasslike anomaly observed in the low-temperature specific heat of incommensurate phases is proposed. The key point of this explanation is to properly account for the phason damping when computing the thermodynamic magnitudes. The low-temperature specific heat of the incommensurate phases is discussed within three possible scenarios for the phason dynamics: no phason gap, static phason gap, and a phason gap of dynamical origin. Existing NMR and inelastic scattering data indicate that these scenarios are possible in biphenyl, blue bronze K(0.30)MoO(3), and bis (4-chlorophenyl) sulfone respectively. Estimates of the corresponding low-temperature specific heat are in reasonable agreement with the experiments.     

Novel formulations of vitamins and insulin by nanoengineering of polyelectrolyte multilayers around microcrystals

Microcapsules loaded with vitamin K3 (VK3), biotin, or insulin were prepared by using a novel coating technology based on the layer-by-layer (LbL) deposition of oppositely charged polyelectrolytes onto microcrystal templates. This produced multilayered, polymeric shells of varying thickness around the crystalline cores. Dissolution of the core material (VK3 with ethanol, biotin with basic solution, and insulin with acidic solution), resulted in its release through the shells. Microelectrophoresis was employed to monitor the microcrystal coating process; confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM) were used to verify multilayer coating and the formation of hollow polymer shells following removal of the microcrystal templates. The release rates of both VK3 and insulin decreased as the wall thickness (the number of polyelectrolyte layers deposited onto the microcrystal cores), increased. The release time could be varied by a factor of more than ten, depending on the number of polyelectrolyte layers applied. Following the addition of 70 mass % ethanol, the solubility of VK3 increased by as much as 170-fold, resulting in an increased rate of VK3 release. By selecting appropriate polymer materials for the shells, and by controlling the number of polyelectrolyte layers applied, shells of various thickness, stiffness, aqueous solubility, dispersibility, biocompatibility, and permeability can be constructed.     

Development of a Sequential Injection Analysis Device for the Determination of Total Polyphenol Index in Wine

A sequential injection analysis method is developed for the determination of the total polyphenol index in wines. The determination is based on the Folin-Ciocalteu reaction, which is monitored spectrophotometrically. Interactions between experimental variables and their optimal levels were investigated using factorial designs. The proposed system is fully computerised and is able to monitor polyphenol index in real samples of white, sweet and red wines. The calibration graph is linear from 5 to 200mg·L^–1 using Tannic acid as standard, with a detection limit of 3.2mg·L^–1. Interferences are studied. For validation purposes the proposed methodology was applied to the determination of the total polyphenol index in different types of wines and compared with earlier alternatives in order to assess their performance.     

Regularized resolvent transform for direct calculation of 45 degrees projections of 2D J spectra

The regularized resolvent transform (RRT) has been applied in a novel way to J-resolved spectra. This involves the direct calculation of the 45 degrees projection without constructing the 2D spectrum. The results show a significant resolution enhancement over that obtained by the 45 degrees projection of a 2D Fourier spectrum, even for much larger signals. In particular, RRT is able to resolve peaks that belong to different overlapping multiplets in a very crowded spectral region, where the conventional technique fails for any signal size. The resolving power of this method along with the significantly shorter signals required, make this method a powerful tool in spectral assignment.