Simultaneous determination of iron, cobalt, nickel and copper by UV-visible spectrophotometry with multivariate calibration

A method for the simultaneous spectrophotometric determination of the divalent ions of iron, cobalt, nickel and copper based on the formation of their complexes with 1,5-bis(di-2-pyridylmethylene) thiocarbonohydrazide (DPTH) is proposed. The resolution of quaternary mixtures of these metallic ions was accomplished by several chemometric approaches. A comparative study of the results obtained for simultaneous determinations in mixture by using principal component regression (PCR) and partial least-squares regression (PLS-1 and PLS-2) for absorbance, first-derivative and second-derivative data is presented. In general, the best recovery values are obtained by the PLS-2 method for absorbance data. This procedure allows the simultaneous determination of the cited ions in alloys and biological materials Good reliability of the determination was proved.     

Simultaneous Determination of Ascorbic Acid and Uric Acid by Using a PVC/TTF‐TCNQ Composite Electrode as Detector in a FIA System

A PVC/TTF‐TCNQ composite electrode has been employed as detector in a flow injection system. The proposed method allows the simultaneous detection of ascorbic acid (AA) and uric acid (UA) in mixtures by using a FIA system in a simple manner, without pre‐treatment or modified electrode. This method is based on the amperometric determination of (a) ascorbic acid at 0.15 V and (b) both analytes at 0.35 V, being the response linear in the range 1×10^?2–4×10^?4 M for both analytes with detection limits (S/N=3) of 1.2×10^?4 M and 8.1×10^?5 M for AA and UA, respectively.     

Plasma quantification of quazepam and its 2-oxo and N-desmethyl metabolites by capillary gas chromatography

The authors have developed a gas chromatographic method for the simultaneous quantification of quazepam in plasma and its two main metabolites, 2-oxoquazepam and N-desmethylquazepam. This method involves an extraction from plasma using butyl acetate, and an analysis by electron-capture detection on a CP-Sil 5 WSCOT capillary column. Intra- and inter-day precision and accuracy were better than 10% for each of these three compounds, even near their detection limit estimated at 0.2 ng/ml. Linearity proved satisfactory between 0.2 and 60-70 ng/ml. For endogenous plasma components, adequate specificity was achieved. Despite some inconveniences, a long analysis time, a progressive saturation of the column owing to a low oven temperature, and a relatively short life-span of the CP-Sil 5 columns, this method was the only one available in the literature for the quantification of quazepam and its metabolites from the same plasma sample. It was successfully applied to phase I studies in healthy volunteers.     

Barreleneiridium(I) complexes. Crystal structures of [Ir(Me3TFB)(η6-C6H4Me2)]ClO4 and [Ir(TFB)(η5-PhNPh2)]BF4·CH2Cl2 (TFB = tetrafluorobenzobarrelene)

A new series of cationic areneiridium(I) complexes of formula [Ir(barrelene)(arene)]⁺ or [Ir(barrelene)(PhNRPh)]⁺ (R= Ph or H) have been synthesized from neutral iridium complexes of the type [IrY(barrelene)]_x (barrelene = Me₃TFB, Y = Cl or OMe (x = 2), Y = acac (x = 1); barrelene = TFB, Y = OMe (x = 2), Y = acac (x = 1)). The crystal structures of [Ir(Me₃TFB)(1,4-C₆H₄Me₂)]ClO₄ and [Ir(TFB)(PhNPh₂)]BF₄·CH₂Cl₂ have been determined by X-ray diffraction. They crystallize in the space groups Pbca and Pna2₁ respectively with lattice constants of 17.6947(11), 15.8072(10), 16.0019(11) Å and 9.8059(2), 20.8097(9), 14.3367(4) Å. Final R factors were 0.063 and 0.042 for the observed data. Both complexes show a staggered arrangement between the arene and the TFB moieties and deviation from planarity of the coordinated arene ligands. In the second complex the IrC and NC distances, the CNC angle, the type of arene puckering, and the spectroscopic data indicate a distortion of the coordinated arene towards a η⁵-coordinated iminocyclohexadienyl form.     

Expanding the Scope of the Cleavable N-(Methoxy)oxazolidine Linker for the Synthesis of Oligonucleotide Conjugates

Oligonucleotides modified by a 2′-deoxy-2′-(N-methoxyamino) ribonucleotide react readily with aldehydes in slightly acidic conditions to yield the corresponding N-(methoxy)oxazolidine-linked oligonucleotide-conjugates. The reaction is reversible and dynamic in slightly acidic conditions, while the products are virtually stable above pH 7, where the reaction is in a ‘‘switched off-state’’. Small molecular examinations have demonstrated that aldehyde constituents affect the cleavage rate of the N-(methoxy)oxazolidine-linkage. This can be utilized to adjust the stability of this pH-responsive cleavable linker for drug delivery applications. In the present study, Fmoc-β-Ala-H was immobilized to a serine-modified ChemMatrix resin and used for the automated assembly of two peptidealdehydes and one aldehyde-modified peptide nucleic acid (PNA). In addition, a triantennary N-acetyl-d-galactosamine-cluster with a β-Ala-H unit has been synthesized. These aldehydes were conjugated via N-(methoxy)oxazolidine-linkage to therapeutically relevant oligonucleotide phosphorothioates and one DNA-aptamer in 19–47% isolated yields. The cleavage rates of the conjugates were studied in slightly acidic conditions. In addition to the diverse set of conjugates synthesized, these experiments and a comparison to published data demonstrate that the simple conversion of Gly-H to β-Ala-H residue resulted in a faster cleavage of the N-(methoxy)oxazolidine-linker at pH 5, being comparable (T_0.5 ca 7 h) to hydrazone-based structures.     

Improved procedure for the synthesis of thiazolium-type peptide coupling reagents: BMTB as a new efficient reagent

An efficient scalable synthesis of 2-halothiazolium-type peptide coupling reagents has been developed. The key step is the formation of the 2-bromothiazole scaffold through cyclization of α-thiocyanato ketones with hydrogen bromide. Using this method, the new coupling reagent 2-bromo-N-methylthiazolium bromide (BMTB) was synthesized. BMTB was tested in a difficult model coupling reaction of two sterically hindered N-methylated amino acids and showed higher activity than the well-established peptide coupling reagent HATU.     

Structure of 1-(1-adamantyl)pyrazoles : Crystal geometry and carbon-13 nmr spectroscopy

Crystal structures of 1-(1-adamantyl)pyrazole, 1a, and 1-(1-adamantyl-3-ol)-4-nitropyrazole, 2a, have been solved by X-ray analysis. The space groups and cell parameters are P2₁, a, 7.4021(3), b, 10.7529(5),c, 6.9651(2)Å, β, 90.206(3)° for 1a with Z = 2 and P2/n, a, 31.1172(14), b, 6.8506(1), c, 12.0313(3)Å, β 94.873(3)° for 2a with Z = 8. Refinements were carried out down to R values of 0.043 (R_w, = 0.046) and 0.079 (R_w = 0.061) for the 951 (2σ(I)) and 2461 (3σ(I)) observed reflections respectively. The conformation about the bond between the heterocycle and the carbocycle is discussed on theoretical grounds INDO calculations): the adamantane behaves as a free rotor. The stcricinteractions of the adamantyl residue with the methyl substituents in 2- and 5-position of pyrazole are apparent in the C-13 chemical shifts.     

On-line preconcentration of mercury by sorption on an anion-exchange resin loaded with 1,5-bis[(2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide and determination by cold-vapour inductively coupled plasma atomic emission

1,5-Bis[(2-pyridyl)-3-sulphophenyl methylene] thiocarbonohydrazide (PSTH) immobilized on an anion-exchange resin (Dowex) has been used for the on-line preconcentration of mercury from biological samples and waters prior to its determination by inductively coupled plasma atomic emission spectroscopy. The metal was eluted from the column using a solution of 2 M HNO(3) and mixed on-line with SnCl(2). The optimum experimental conditions were evaluated for the continuous preconcentration of Hg, the direct generation of mercury vapour and the final determination of this element by ICP-AES. The enrichment, together with low blank levels of the optimized procedure, allow the simple determination of this toxic element at concentrations down to a few nanograms per milliliter. The proposed method has a linear calibration range 5-1000 ng ml(-1) of mercury, with a detection limit of 4 ng ml(-1) (S/N=3) and a sampling rate of 40 h(-1), investigated with a 9 ml sample volume. The precision of the method (evaluated as the relative standard deviation obtained after analyzing ten series of ten replicates) was +/-3.6% at the 10 ng ml(-1) level of Hg(II) and +/-1.3% at the 100 ng ml(-1) level. The accuracy of the method was examined by the analysis of certified reference materials.