Degradation Kinetics of an Epoxy/Cycloaliphatic Amine Resin Under Isothermal and Non-isothermal Conditions

A study of an epoxy-cycloaliphatic amine system has been realized using a thermogravimetric technique (TG). Isothermal and non-isothermal (dynamic) methods were employed to determine the kinetic data of this system. Five methods were used for determining the activation energies of this system in the dynamic heating experiments. In two of them (Flynn-Wall-Ozawa, and Kissinger) it is not necessary to have a prior knowledge of the reaction mechanism of the degradation behaviour for this system. In the other ones (Coats and Redfern, Horowitz and Metzger, and Van Krevelen et al.) it is necessary to know this reaction mechanism, besides Criado et al. method was used for determining it. The results have shown that good agreement between the activation energies obtained from all methods can be achieved if it is assumed that the degradation behaviour of this system is of sigmoidal-rate type. This revised version was published online in August 2006 with corrections to the Cover Date.     

The utilization of classical spin Monte Carlo methods to simulate the magnetic behavior of extended three-dimensional cubic networks incorporating M(II) ions with an S = 5/2 ground state spin

The numerical simulations of the magnetic properties of extended three-dimensional networks containing M(II) ions with an S = 5/2 ground-state spin have been carried out within the framework of the isotropic Heisenberg model. Analytical expressions fitting the numerical simulations for the primitive cubic, diamond, together with (10-3) cubic networks have all been derived. With these empirical formulas in hands, we can now extract the interaction between the magnetic ions from the experimental data for these networks. In the case of the primitive cubic network, these expressions are directly compared with those from the high-temperature expansions of the partition function. A fit of the experimental data for three complexes, namely [(N(CH(3))(4)][Mn(N(3))] 1, [Mn(CN(4))](n)() 2, and [Fe(II)(bipy)(3)][Mn(II)(2)(ox)(3)] 3, has been carried out. The best fits were those obtained using the following parameters, J = -3.5 cm(-)(1), g = 2.01 (1); J = -8.3 cm(-)(1), g = 1.95 (2); and J = -2.0 cm(-)(1), g = 1.95 (3).     

Anti-HIV cyclotides

The cyclotides are a recently discovered, structurally unique family of bioactive plant peptides. Their discovery spawned a series of structural analyses, synthetic efforts, and studies to define the biosynthesis and biological properties of these novel peptide metabolites. Cyclotides have a head-to-tail cyclized amino acid backbone and a conserved cystine knot motif that provides an extremely stable structural framework. They all share a common global fold and are highly resistant to denaturation and to cleavage by proteolytic enzymes. However, these macrocyclic peptides are quite permissive to amino acid substitutions or additions in several peripheral loop regions, since changes in these loops do not alter the core cyclotide structure. These features make cyclotides attractive templates for incorporating desired amino acid sequences and then delivering these peptide sequences in a well defined, highly stable framework. Cyclotides likely function in a defensive role in the source plants since they exhibit a broad spectrum of antimicrobial activity and are detrimental to the growth and survival of herbivorous insects. Cyclotides are gene-encoded polypeptides that are cleaved from larger precursor proteins and then cyclized. This review summarizes research done on a subset of cyclotides that were discovered due to their HIV inhibitory properties. It details the isolation and characterization of these compounds and describes this work in the context of our current state of knowledge of the entire cyclotide family.     

Determination of chloroquine in biological material by gas-liquid chromatography (author's transl)]

A method is developed for the gas chromatographic determination of chloroquine after extraction from biological material, using medazepam as the internal standard and a column filled with 3% OV-17 on Gas-Chrom Q. The detection limits are: 0.15 mug/ml of urine, 0.25 mug/ml of whole blood, and 1.50 mug/g of tissue. The technique can be applied in toxicological analysis and in monitoring drug levels.     

Regiospecific synthesis of mono-N-substituted indolopyrrolocarbazoles

[reactions: see text] Two complementary and efficient strategies have been developed for the regiospecific synthesis of unsymmetrical indolopyrrolocarbazoles (IPCs) mono-N-substituted with a pentacycle. A halogen in position 2 of the intermediate bisindolylmaleimides 3a-e allows a selective Mitsunobu coupling by exploiting the increased acidity of the 2-chloro-substituted indole nitrogen. It also promotes an easier cyclization of bisindolylmaleimides 4a-e and 7b-e to IPCs. Alkylation of the 2-unsubstituted indole-3-carboxamides 2a,b and further processing to the corresponding IPCs gives access to the opposite regioisomers.     

On-line preconcentration and determination of mercury in biological samples by flow injection vapour generation inductively coupled plasma atomic emission spectrometry

An FI-ICP-AES method for the determination of trace levels of mercury in biological samples has been described, which is based on the extraction of the mercury complex with 1,5-bis (di-2-pyridyl)methylene thiocarbonohydrazide (DPTH) on-line into isobuthyl-methyl ketone (IBMK). The organic phase (containing the complex) has been mixed on-line with SnCl₂ in N,N-dimethylformamide. Thus, mercury vapour can be generated directly from the organic phase and separated in a gas-liquid separation device. The detection limit for mercury is 4 ng/ml and the calibration curve is linear at least from 10 to 2500 ng/ml. The relative standard deviation for 10 replicate measurements is ±1% for 100 ng/ml of Hg(II). Results from the analysis of some certified biological reference materials are given.     

Azulene as a ligand in cationic rhodium and iridium complexes. Crystal structure of [Rh(TFB)(az)]PF6

Rhodium or iridium complexes of formula [M(diolefin)(az)]⁺ have been prepared by treating [MCl(diolefin)]₂ complexes with silver salts and azulene, and also by treating [Rh(diolefin)₂]⁺ with azulene. The reactions of some representative complexes have been studied. Reaction of [M(C₅Me₅)(Me₂CO)₃]²⁺ with azulene appears to give dinuclear diazulene cationic complexes. The crystal structure of compound [Rh(TFB)(az)]PF₆ has been solved by X-ray methods. It crystallizes in the space group P2₁/c with cell constants 8.4241(4), 16.6911(8), 15.0026(7) Å, 95.897(6)°. Refinement gave R = 0.027 and R_w = 0.032 for 2991 observed reflexions. The Rh atom is coordinated to the five-membered ring, with RhC distances shortest for the atoms which are trans to the diolefinic double bonds. The bonding scheme within the azulene ligand differs from that in the parent hydrocarbon.     

Conformational dependence of pyranoid rings 1,2-cis-fused to dioxolane rings on the configuration of the dioxolane rings in acetylated derivati

X-Ray and ¹H N.M.R. studies on pyranoid rings 1,2-$\text{cis}$-fused to dioxolane rings in acetylated $\text{D}$-gluco- and $\text{D}$--galactopyranose derivatives demonstrate that the configuration of the dioxolane ring influences the conformation of the pyranoid ring in the $\text{D}$-gluco but not in the $\text{D}$-galactopyranose series. The crystal structure of 3,4,6-tri-$\text{O}$-acetyl-1,2-$\text{O}$-(R)--(l-cyano-ethylidene)-α-$\text{D}$-glucopyranose ($\text{1}$) and 3,4,6-tri-$\text{O}$-acetyl-1,2-$\text{O}$-($\text{R}$)-(1-cyano-ethylidene)-α-$\text{D}$-galactopyranose ($\text{2}$)have been determined by X-ray analysis. Lattice parameters for $\text{1}$ are a=20.6021 (11), b=8.0438 (2), c=5.5541 (1) Å and β= 95.588 (3)° for a cell with P21 symmetry. These parameters for $\text{2}$ are a=20.3361 (7), b=10.0907 (2), c=18.9115 (5) Å, β =112.399 (2)°, C2, with two crystallographycally independent molecules. The conformation of the pyranoid ring in both compounds can be described as flattened ⁴C₁ and that of the dioxolane ring as distorted E₁. The importance of the torsion angles for describing problems of configuration is remarked and the use of relative configurational angles is stressed. The ¹H N.M.R. spectra of $\text{1}$ and $\text{2}$ and 3,4,6-tri-$\text{O}$-acetyl-1,2-O-(S)- and (R)-ethylidene-α-$\text{D}$-glucopyranose ($\text{5}$ and $\text{7}$), 3,4,6-tri-O-acetyl--1,2-O-(S)- and ($\text{R}$)-ethylidene-α-$\text{D}$-galactopyranose ($\text{6}$ and $\text{8}$), and 3,4,6-tri-$\text{O}$-acetyl-1,2-$\text{O}$-($\text{S}$)-and ($\text{R}$)-benzylidene-α-$\text{D}$-glucopyranose ($\text{9}$ and $\text{10}$) have been analyzed by using iterative computer methods and N.O.E. measurements. The results indicate that the major solution conformation of the pyranoid ring of the derivatives in the $\text{D}$-gluco series $\text{1}$, $\text{5}$ and $\text{9}$ may be described as flattened ⁴C₁ and that of $\text{7}$ and $\text{10}$ as ²$\text{S}$₅. The major solution conformation of the pyranoid ring in all compounds in the $\text{D}$-galacto series ($\text{2}$,$\text{4}$,$\text{6}$,$\text{8}$) may be described as flattened ⁴$\text{C}$₁.     

Direct determination of mitoxantrone and its mono- and dicarboxylic metabolites in plasma and urine by high-performance liquid chromatography

The simultaneous isolation and determination of mitoxantrone (Novantrone) and its two known metabolites (the mono- and dicarboxylic metabolites) were carried out using a high-performance liquid chromatographic (HPLC) system equipped with an automatic pre-column-switching system that permits drug analysis by direct injection of biological samples. Plasma or urine samples were injected directly on to an enrichment pre-column flushed with methanol-water (5:95, v/v) as the mobile phase. The maximum amount of endogenous water-soluble components was removed from biological samples within 9 min. Drugs specifically adsorbed on the pre-column were back-flushed on to an analytical column (Nucleosil C18, 250 X 4.6 mm I.D.) with 1.6 M ammonium formate buffer (pH 4.0) (2.5% formic acid) containing 20% acetonitrile. Detection was effected at 655 nm. Chromatographic analysis was performed within 12 min. The detection limit of the method was about 4 ng/ml for urine and 10 ng/ml for plasma samples. The precision ranged from 3 to 11% depending on the amount of compound studied. This technique was applied to the monitoring of mitoxantrone in plasma and to the quantification of the unchanged compound and its two metabolites in urine from patients receiving 14 mg/m2 of mitoxantrone by intravenous infusion for 10 min.