Microfabrication of stacks of acoustic matching layers for 15 MHz ultrasonic transducers

This paper presents a novel method used to manufacture stacks of multiple matching layers for 15 MHz piezoelectric ultrasonic transducers, using fabrication technology derived from the MEMS industry. The acoustic matching layers were made on a silicon wafer substrate using micromachining techniques, i.e., lithography and etch, to design silicon and polymer layers with the desired acoustic properties. Two matching layer configurations were tested: a double layer structure consisting of a silicon–polymer composite and polymer and a triple layer structure consisting of silicon, composite, and polymer. The composite is a biphase material of silicon and polymer in 2-2 connectivity. The matching layers were manufactured by anisotropic wet etch of a (1 1 0)-oriented Silicon-on-Insulator wafer. The wafer was etched by KOH 40 wt%, to form 83 μm deep and 4.5 mm long trenches that were subsequently filled with Spurr’s epoxy, which has acoustic impedance 2.4 MRayl. This resulted in a stack of three layers: The silicon substrate, a silicon–polymer composite intermediate layer, and a polymer layer on the top. The stacks were bonded to PZT disks to form acoustic transducers and the acoustic performance of the fabricated transducers was tested in a pulse-echo setup, where center frequency, −6 dB relative bandwidth and insertion loss were measured. The transducer with two matching layers was measured to have a relative bandwidth of 70%, two-way insertion loss 18.4 dB and pulse length 196 ns. The transducers with three matching layers had fractional bandwidths from 90% to 93%, two-way insertion loss ranging from 18.3 to 25.4 dB, and pulse lengths 326 and 446 ns. The long pulse lengths of the transducers with three matching layers were attributed to ripple in the passband.     

Electrochemical testing of composite electrodes of (La1?x Sr x ) s MnO3 and doped ceria in NO-containing atmosphere

The possibility of using electrochemical cells for removal of NO _x from an exhaust gas with excess O₂ has been examined. (La_1−x Sr _x ) _s MnO₃ (LSM) and ceria doped with Pr or Gd were selected as electrode materials and investigated in three-electrode cells. The electrodes were characterised electrochemically with electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV), and the gas composition monitored while the electrodes were polarised. The electrodes of (La_0.5Sr_0.5)_0.99MnO₃ (LSM50) and Ce_0.8Pr_0.2O_2−δ exhibit higher current densities in 0.1% NO in Ar than in air at 300 to 400 °C during CV. This indicates some apparent selectivity towards NO compared to O₂. The electrodes can remove NO, when polarised to at least −0.6 V vs. Pt/Air at 600 °C, and EIS measurements under polarisation indicate that the kinetics of the electrodes change, when the electrode potential gets below −0.6 V vs. Pt/Air.     

Spectroelectrochemical cell for in situ studies of solid oxide fuel cells

Solid oxide fuel cells (SOFCs) are able to produce electricity and heat from hydrogen‐ or carbon‐containing fuels with high efficiencies and are considered important cornerstones for future sustainable energy systems. Performance, activation and degradation processes are crucial parameters to control before the technology can achieve breakthrough. They have been widely studied, predominately by electrochemical testing with subsequent micro‐structural analysis. In order to be able to develop better SOFCs, it is important to understand how the measured electrochemical performance depends on materials and structural properties, preferably at the atomic level. A characterization of these properties under operation is desired. As SOFCs operate at temperatures around 1073 K, this is a challenge. A spectroelectrochemical cell was designed that is able to study SOFCs at operating temperatures and in the presence of relevant gases. Simultaneous spectroscopic and electrochemical evaluation by using X‐ray absorption spectroscopy and electrochemical impedance spectroscopy is possible.     

Fast simulation of second harmonic ultrasound field using a quasi-linear method

Nonlinear propagation of sound has been exploited in the last 15 years in medical ultrasound imaging through tissue harmonic imaging (THI). THI creates an image by filtering the received ultrasound echo around the second harmonic frequency band. This technique produces images of enhanced quality due to reduced body wall reverberation, lower perturbations from off-axis echoes, and multiple scattering of reduced amplitude. In order to optimize the image quality it is essential to be able to predict the amplitude level and spatial distribution of the propagating ultrasound pulse. A method based on the quasi-linear approximation has been developed to quickly provide an estimate of the ultrasound pulse. This method does not need to propagate the pulse stepwise from the source plane to the desired depth; it directly computes a transverse profile at any depth from the definitions of the transducer and the pulse. The computation handles three spatial dimensions which allows for any transducer geometry. A comparison of pulse forms, transverse profiles, as well as axial profiles obtained by this method and state-of-the-art simulators, the KZKTexas code, and Abersim, shows a satisfactory match. The computation time for the quasi-linear method is also smaller than the time required by the other methods.     

Untersuchung von Heterostrukturen der Mischkristallreihe GaAs/AlAs mit dem Rasterelektronenmikroskop

The investigation of heterojunctions of the mixed crystals series GaAs/AlAs by means of different scanning electron microscopic techniques yields that the utilization of the cathodoluminescence is highly suited for detecting small energy gap differences. Compared with the secondary electron contrast and the imaging by backscattered electrons, resp., it is clearly advantagoeus with respect to an identification specific tot he material. The course of the intensity profile with increasing primary electron energy permits to indicate a qualitative correlation with the value of the band gap. This is demonstrated with two heterojunctions with strongly different dopings. The Y-modulation technique is successful in displaying an orientation-dependent portion of the image contrast of homo- and heterojunctions of multiple structures.     

Can-order policy for the periodic-review joint replenishment problem

In this paper we study the stochastic joint replenishment problem. We compare the class of periodic replenishment policies and the class of can-order policies for this problem. We present a method, based on Markov decision theory, to calculate near-optimal can-order policies for a periodic-review inventory system. Our numerical study shows that the can-order policy behaves as well as, if not better than, the periodic replenishment policies. In particular, for examples where the demand is irregular, we find cost differences up to 15% in favour of the can-order policy.     

Modelling of inextensible cable dynamics with experiments

The recognition of very stiff axial elastic motion compared to the motion in the transverse direction for cable dynamics motivates separation of the axial and transversal dynamics. For certain applications, e.g. real-time model-based control, fast calculation of the transverse motion may be of high importance, motivating the development of numerically efficient software code. Separation of axial dynamics renders possible neglection or simplification of the axial dynamics if appropriate for the system studied. A model is proposed with the assumption of axial inextensible material and negligible bending, torsion and shear stiffness in the cable. Experiments are carried out to verify the model, and the results are compared with simulations. The comparison between the experiments and numerical simulations showed good agreement up to the second frequency range with resonant behavior and the corresponding motion amplitudes.     

Inductive inference of ultimately periodic sequences

An algorithm is presented for inductive inference of ultimately periodic sequences. It can be implemented in linear time and space.Dedicated to Peter Naur on the occasion of his 60th birthday     

Degradation of blood in the human digestive tract

Samples of human faeces from patients suffering from intestinal bleeding have been studied by use of Mössbauer spectroscopy. It is shown that it is possible to follow the degradation of blood in the digestive tract.