关于形式三角矩阵环

本文研究形式三角矩阵环 R 的若干新性质,讨论 R-模的伪投射性,给出了形式三角矩阵环 R 是 V-环或半 V-环的充要条件．同时,给出了 R 是 PS-环的条件．     

数值研究激波与旋涡的相互作用

从非定常形式的Euler方程出发,数值模拟了运动激波与旋涡相互作用的非定常流动过程。为保证激波具有较高的分辨率,采用对称型TVD格式进行了数值计算。结果表明。这样可以有效地模拟流场中一些复杂的流动现象,如激波变形、激波分叉和三波点的形成,以及旋涡结构的变化过程等,并与已有的实验流动显示相符良好。同时,也是对TVD格式求解这类问题的一次初步尝试。     

各向异性本构关系在板料成形数值模拟中的应用

对几种能表达面内各向异性的屈服准则Hill、Barlat-Lian、Barlat进行了比较。以弹性变形服从各向同性广义虎克定律的情况下，给出了基于张量算法推导的弹塑性本构关系的一般表达式，并由此导出了相应屈服准则的弹塑性本构关系的显式表达。借助ABAQUS软件本构模块用户子程序接口，分别实现了这些屈服准则在ABAQUS的嵌入。以模拟方形盒的拉延过程为例，分析了不同的屈服准则在板料成形过程数值模拟中的应用。模拟结果表明，基于弹塑性本构关系一般表达所列出的相应屈服准则的显式表达式是正确的；在采用壳元来模拟板料成形时，采用Barlat准则的模拟结果和采用Barlat-Lian准则的结果差别不大。     

中心裂纹圆盘应力强度因子的测试误差分析

本文在中心裂纹圆盘应力强度因子解析解的基础上,利用一阶微分法则,给出了与裂纹相对长度和加载角相关的应力强度因子(K 和K )的4个误差传递函数。这4个误差传递函数关于裂纹相对长度和加载角均是非线性的,它们既是误差分析的基础,又是合理确定裂纹相对长度和加载角的基础。分析结果表明,加载角的误差Δθ除了对纯 型K 的误差几乎没有影响,对纯 型K 影响较小外,对复合型K 、K 的误差均有较大影响。最后,本文建议裂纹相对长度的取值范围为0.4～0.6;还建议在复合型断裂试验时,必须依据对K 、K 的总体精度要求来严格控制加载角的精度。     

EFFECTS OF FINELY DISPERSED METALLIC PALLADIUM ON MICROSTRUCTURE AND PROPERTIES OF NANOCOMPOSITES PRODUCED BY SOL-GEL TECHNIQUE

Nanosized palladium particles were incorporated into mesoporous silica matrix to obtain nanocomposites using the sol-gel technique. Effects of the finely dispersed metallic palladium on the microstructure and properties of the nanocomposites were investigated. By means of X-ray diffraction and optical absorption, it was found that palladium particles were 5-9 nm in diameter and their uniform dispersion in the mesoporous silica depended on both the content of the palladium and the structural features of the silica matrix. The results showed that the mixing method of preparation led to wider size distribution of the nanosized particles as compared to the immersion method, but dispersed degree was reduced. Although the incorporation of nanosized palladium particles could not substantially induce significant structural changes of the matrix, the apparent red-shifted optical absorptions for the nanocomposites were observed as compared to the parent monolithic silica, particularly with increase in palladium loading and calcination temperature.     

Application of the Fourier transform in electronic speckle photography

In speckle photograph technology, to determine the displacement of the points on the surface of the measured body, the conventional method is to put the film which has recorded the speckle patterns before and after displacement into a system of optical Fourier transforms. After filtering on the spectrum plane, the experimentalist can obtain the displacement information from the interference pattern on the image plane. Instead of setting up a complex optical Fourier transform system, we consider the speckle field as a light intensity function of 2 dimensions, which will change with different positioning of the points. After working on the function's discrete Fourier transform (DFT), according to one of the properties of Fourier transformation, the displacement of the measured point is involved in the phase of its spectrum. Having extracted the displacement information from the phase, we obtain the distribution of the displacement field. In this paper, we deduce the expression for the displacement field by using Fourier transformation under conditions of both equal and unequal displacement and show their applications.     

Double perovskite oxides Sr_2Mg_(1-x)Fe_xMoO(6-δ) for catalytic oxidation of methane

The double perovskite oxides Sr2Mg1-xF exMoO6-δ were investigated as catalysts for the methane oxidation.The structural properties of catalysts were characterized in detail by X-ray diffraction,X-ray photoelectron spectroscopy and X-ray absorption spectroscopy.The catalytic property was strongly influenced by the Fe substitution.The relation between catalytic performance and the degree of Fe substitution was examined with regard to the structure and surface characteristics of the mixed oxides.The Fe-containing catalysts exhibited higher activity attributable to the possible(Fe2+,Mo6+) and (Fe3+,Mo5+)valency pairs,and the highest activity was observed for Sr2Mg0.2Fe0.8MoO6-δ.The enhancement of the catalytic activity may be correlated with the Fe-relating surface lattice oxygen species and was discussed in view of the presence of oxygen vacancies.     

固体高分辨~(13)C NMR研究γ线辐照对结晶聚乙稀聚集态结构的影响

结晶聚乙烯(PE)经~(60)Coγ线辐照后,用固体高分辨~(13)C NMR CP/DD/MAS方法观测解析了辐射效果与具有片晶结构的结晶相,结晶—橡胶状无定形界面相以及橡胶状无定形相的聚集态结构的关系。考察了各相中的~(13)C核自旋—晶格弛豫和自旋-自旋弛豫行为及辐照对其影响。得到辐照后产生交联,破坏,相转变及晶型变化等有意义的结果,对PE的辐照效应和机制的探讨提供了核磁共振的新实验证据。     

激光荧光计算机测痕量金

我们研制成的用激光荧光法结合微型计算机数据采集和数据处理组成的测量痕量金系统,具有灵敏度高、测量准确、速度快、成本低的特点。本文主要介绍系统的工作原理和软硬件的计算机设计。     

焊缝缺陷的电子散斑现场检测技术研究

本文用电子散斑干涉及剪切电子散斑干涉技术(ESPI/SESPI)实现了薄壁旋转壳及球形压力容器焊缝缺陷的现场实时检测,给出了实际压力容器焊缝缺陷的无损检测结果与理论分析;将ESPI系统与旋转椭球曲面反射镜检测装置结合,获得了被测容器焊缝360°全方位准确成象及ESPI全场缺陷检测;通过预制缺陷的ESPI、SESPI无损检测与理论计算,完成了孔洞型缺陷与裂纹型缺陷的变形与梯度分析.