Investigation of sulfonated poly(ether ether ketone sulfone)/heteropolyacid composite membranes for high temperature fuel cell applications

The sulfonated poly(ether ether ketone sulfone) (SPEEKS)/heteropolyacid (HPA) composite membranes with different HPA content in SPEEKS copolymers matrix with different degree of sulfonation (DS) were investigated for high temperature proton exchange membrane fuel cells. Composite membranes were characterized by Fourier transfer infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). FTIR band shifts suggested that the sulfonic acid groups on the copolymer backbone strongly interact with HPA particles. SEM pictures showed that the HPA particles were uniformly distributed throughout the SPEEKS membranes matrix and particle sizes decreased with the increment of copolymers' DS. The holes were not found in SPEEKS‐4/HPA30 (consisting of 70% SPEEKS copolymers with DS = 0.8 and 30% HPA) composite membrane after composite membranes were treated with boiling water for 24 h. Thermal stabilities of the composite membranes were better than those of pure sulfonated copolymers membranes. Although the composite membranes possessed lower water uptake, it exhibited higher proton conductivity for SPEEKS‐4/HPA30 especially at high temperature (above 100 °C). Its proton conductivity linearly increased from 0.068 S/cm at 25 °C to 0.095 S/cm at 120 °C, which was higher than 0.06 S/cm of Nafion 117. In contrast, proton conductivity of pure SPEEKS‐4 membrane only increased from 0.062 S/cm at 25 °C to 0.078 S/cm at 80 °C. At 120 °C, proton conductivity decreased to poor 0.073 S/cm. The result indicated that composite membranes exhibited high proton conductivity at high temperature. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1967–1978, 2006     

蛋白质—四氯苯醌荷移反应的分光光度研究

本文用分光光度法研究了蛋白质—四氯苯醌荷移反应。通过对影响反应各因素的研究,确立了以四氯苯醌形成荷移络合物的方法测定蛋白质的最佳条件,测定了最大结合数及反应平衡常数。     

Molecular Spectroscopic Study on the Interaction between Heparin and Neutral Red

The interaction between heparin and neutral red was investigated by molecular spectroscopic methods. The change of all spectra suggested that positively charged neutral red had interacted with negatively charged heparin. The study of influence factors indicated that electrostatic force and hydrophobic bond might be involved in the interaction. The total binding number per disaccharide unit and intrinsic binding constant were obtained using Scatchard model.     

Effect of Electrical Pulse Forms on the CO2 Reforming of Methane Using Atmospheric Dielectric Barrier Discharge

Methane conversion using an electric discharge has been studied for many years. Recently, many research groups have developed high-frequency pulsed plasma reaction for methane conversion to higher hydrocarbons and synthesis gas. CO₂ reforming of methane to synthesis gas has also attracted considerable interest as a method of utilization of the greenhouse gases, CO₂ and CH₄, which occupy most of man-made greenhouse gases. In this study, the influence of pulse form of applied voltage on methane and carbon dioxide conversions and product selectivity has been investigated using a cylindrical type DBD reactor. For this purpose, two kinds of power supply were compared, that is, AC power supply which has a high-frequency sinusoidal wave form, and AC pulse power supply which has modified AC pulse wave form. The conversions of methane and carbon dioxide were enhanced using pulsed plasma. The lower pulse width was more profitable economically.     

Study of the Complexation Behavior of Calixarene with Transition Metal Cations by UV—vis and Fluorescent Spectra

A new fluorescent compound based on calix[4] arene skeleton was synthesized.Its complexation ability with transition metal ions,such as Fe^3 ,Co^2 ,Ni^2 ,Cu^2 ,Zn^2 and Ag^ ,Was investigated by UV-vis and fluorescent spectra.     

Synthesis and Characterization of Novel Orange-emitting Iridium（Ⅲ） Complexes with Diphenylquinoline Ligands Containing Fluorinated Substituent

Three new cyclometalated iridium（m） complexes based on ligands of diphenylquinoline with fluorinated subsfituents were prepared, and characterized by elemental analysis （EA）, ^1H NMR, and mass spectroscopy （MS）. The photophysical and electrophosphorescent properties of the complexes were briefly discussed.     

Cyano-bridged CuII-MV (M = Mo, W) bimetallic layered complexes exhibiting novel honeycomblike structures

Self-assembly of a new precursor [Cu(L)](ClO4)2 (1) (L = macrocyclic ligand) with octacyanometalates [M(CN)8]3- (M = Mo, W) produced two-dimensional cyano-bridged Cu(II)-M(V) bimetallic assemblies [Cu(L)]3n[M(CN)8]2n.6nH2O [M = Mo (2), W (3)] with novel honeycomblike structures, characterized by spectroscopic data, single-crystal X-ray diffraction studies, and magnetic measurements. The crystallographic determination reveals that compounds 2 and 3 are isostructural and crystallize in the triclinic system (P). The Cu atom in a distorted octahedral environment experiences a tetragonal elongation of apical nitrogen atoms exhibiting average Cu-Nax lengths of 2.566 Angstroms for 2 and 2.593 Angstroms for 3, which accounts for the Jahn-Teller effect of a Cu(II) ion. The Cu-NC angles are magnetically important, ranging from 135.7 to 159.2 degrees. Three types of L in the crystal lattice are observed, which are dependent on the relative positions of the pendant hydroxyl groups with respect to the CuN4 basal plane. The positions are correlated with hydrogen bonding of OH groups to neighboring atoms. The magnetic data indicate that ferromagnetic and antiferromagnetic interactions between Cu(II) and M(V) through the CN linkage coexist.     

Preparation of holographic gratings of liquid crystals dispersed in polyurethane acrylates under controlled reaction conditions.

Transmission gratings of holographic polymer-dispersed liquid crystals (HPDLC) are prepared under controlled reaction conditions by adding various amounts of chain-transfer agent (CTA). The resulting films have a higher gel content with lower cross-link density, less dark reaction, less grating shrinkage with much smoother LC/polymer interfaces, smaller induction period, and fast saturation of diffraction efficiency, which shows a maximum of 95 % with 1 % CTA. An optimum LC content of 35 % is verified on the basis of morphology and reaction kinetics.     

Tris(2,2''''-bipyridyl)ruthenium(Ⅱ) electrochemiluminescence (ECL) enhanced by rutin on platinum electrode

Ru(bpy)_(3~(2 )) electrochemiluminescence (ECL) was applied to determination of rutin. ECL intensity of Ru(bpy)_(3~(2 ))could be enhanced in the presence of rutin in basic solution on platinum electrode. At pH 9.9, light emission intensity was found to be linear with rutin in the range of 1-50 mmol/L.     

Determination of sulfite in Oriental herbal medicines

Sulfite was detected in 7 varieties of Oriental herbal medicines (Pueraria radix, Zingiberis rhizoma, Platycodon radix, Adenophora radix, Pinellia tuber, Astragalus radix, and Paeonia radix) on the Korean market. Sulfiting of commercial Oriental herbal medicines by fumigation with burning bituminous coal was simulated, and the accumulation of sulfite was investigated by using fresh Platycodon radix roots obtained from a growing field. The sulfite level reached a plateau in 9 h, and the maximum sulfite level found by the Monier-Williams (MW) method (AOAC 990.28) was 1020 ppm. The sulfite content in the simulated Platycodon radix sample determined by alkali extraction followed by ion-exclusion chromatography with electrochemical detection (AOAC 990.31) was approximately 17% lower on average than the MW results. Free-sulfite levels determined by acid extraction and ion-exclusion chromatography with electrochemical detection were between 19 and 49% of the MW results. The advantages of different methods for sulfite determination and the significance of the results are discussed.