Simple model for frozen-in viscoelastic stress in optical fibers

We have measured residual stress in a commercial single mode optical fiber and observed its relaxation in an annealing process with a polariscopic stress measurement method. After annealing the fiber for an hour at various high temperatures in a specially made image furnace we have measured the temperature dependent relaxation of frozen-in viscoelastic stress in the fiber. We have proposed a simple physical model to explain recently observed relaxation of frozen-in viscoelastic stress in optical fibers based on the Kelvin-Voigt model of viscoelastic materials. The experimental results are explained with our model of frozen-in viscoelastic stress by introducing simplified four-step procedures for fiber drawing.     

Formation of p-type ZnO film on InP substrate by phosphor doping

ZnO thin film was initially deposited on InP substrate by radio frequency (rf) magnetron sputtering and the diffusion process was performed using the closed ampoule technique where Zn₃P₂ was used as the dopant source. To verify the junction formation of ZnO thin films, the electrical properties were measured, and the effects of Zn₃P₂ diffusion on ZnO thin films were investigated. It is observed that the electrical property of the film is changed from n-type to p-type by dopant diffusion effect. Based on the results, it is confirmed that ZnO thin films can be a potential candidate for ultraviolet (UV) optical devices.     

Micromachining of circular ring microstructure by femtosecond laser pulses

In this paper, integration of interference phenomenon into femtosecond laser micromachining was reported as the femtosecond laser pulses were reshaped spatially to perform ablation. The generation of circular interference pattern was demonstrated by overlapping infrared femtosecond laser pulses. The interference pattern was subsequently focused on a copper substrate to ablate microstructures of concentric circular rings. The present technique is expected to open up new applications in the areas of rapid fabrication of micro-Fresnel lenses, hybrid microlenses and lens arrays.     

MM-Wave Band Transversal Filter with Improved Spurious Characteristics

A spurious-suppressed transversal filter using the multiple-coupled line is proposed. The frequency characteristics of the multiple-coupled line are analyzed in detail. In order to compare the performances, the novel spurious-suppressed transversal filter using triple-coupled half-wavelength directional couplers is designed at 30 GHz. The spurious-suppression characteristics of the proposed transversal filter are verified by the full wave analysis and the measurement. The spurious response of the fabricated filter is effectively suppressed and the large attenuation is obtained in the stopband.     

Matrix ENDOR of ion-exchange systems

Electron nuclear double resonance (ENDOR) has been investigated in sulfocation exchangers, containing free radicals stabilized in polymeric matrix or Cu²⁺ and (VO)²⁺ as counterions. It was shown that the ENDOR signal is mainly due to electron-nuclear dipole-dipole interactions between the unpaired electron and nuclei of polymeric matrix or hydrogen atoms of water molecules which hydrate the charge groups. In order to quantitatively describe the ENDOR line shape and intensity, the theory of matrix ENDOR is developed. The correctness of this theory was tested by comparing the temperature dependence of spin-lattice relaxation times calculated from ENDOR line intensities with the corresponding dependence obtained from stationary saturation electron spin resonance spectra. A good agreement was observed in the temperature range from 200 to 350 K. The structural parameters of surroundings of paramagnetic ions Cu²⁺ and (VO)²⁺, which include four coordinated spheres on the distance from 0.3 to 1.2 nm, were calculated. The motional parameters, correlation time and activation energy of mobile protons were also determined. It is concluded that the activation processes of water self-diffusion and proton exchange take place at high temperature, whereas the proton tunneling transfer is possible at low temperature.     

Influence of support properties on the sound radiated from the vibrations of rectangular plates

The control of the forced vibration response of structures through the optimal tuning of its supports is desirable in many applications. Tuning may enhance the dissipation of vibration energy within the supports, thereby reducing fatigue and structure-borne noise. Two different models were developed to calculate the optimal support stiffness that minimizes the velocity response of homogeneous plates. The first model, based on the wave propagation at the edge, yields a good first cut approximation of the optimal properties. The optimal viscous and viscoelastic support stiffness for minimal reflection at the edge was calculated. Maximum absorption of the incident waves occurs when the viscous support stiffness matches the characteristic mechanical impedances of the plate. The second model, based on the Rayleigh-Ritz method, yields more accurate estimates of the optimal support stiffness required to minimize the forced velocity response of the finite rectangular plate. The optimal support properties calculated from the two different methods were in good agreement. This suggested that the modal response of the plate is strongly influenced by the wave reflections at the edges. Finally, the effects of support properties on the sound radiated from the plate were investigated. The optimal support stiffness that minimizes the radiated sound power was found to be smaller than the value that minimizes the velocity response. The results show that both the velocity response and sound radiation are strongly influenced by dissipation of vibration energy at the edges, and demonstrate that support tuning can yield significant noise and vibration reduction.     

Design of multiplexed fiber optic chemical sensing system using clad-removable optical fibers

To prevent possible threats to public safety and economic loss from chemical leakage accidents, novel chemical sensing techniques for regular monitoring and leakage detection have been developed for various fields. We propose a fiber optic liquid chemical sensor (FOCS) system using specialty optical fibers and an optical time domain reflectometer (OTDR), and is based on the leaky wave mode sensing principle. OTDR enables simple multiplexing where individual sensor nodes along the fiber length could be interrogated by a common OTDR. The sensor node in the optical fiber is prepared by removing the desired length of a protective layer using mechanical stripping and chemical etching techniques. A novel laser stripping technique with superior capability to fabricate quasi-distributed dense sensor nodes is devised as well. The FOCS system is further analyzed to characterize the sensor response behavior in relation to the sensor node length and possible environmental and chemical temperature effect. Under the condition satisfying the leaky wave mode principle and within the minimum acceptable refractive index (RI) range by the system, this FOCS system could monitor numerous liquid chemicals with variable refractive indices and has been tested with positive results. In addition, the system shows the possibility for multi-point detection and is further expanded into a hybrid technique capable of estimating the refractive index range of the detected chemical.     

Surface–plasmon-coupled photoluminescence from CdS nanoparticles with Au films

The enhancement of surface–plasmon-coupled photoluminescence from CdS nanoparticles was examined for various thicknesses of sputtered Au films. The improved luminescence with thickness control of Au correlated well with the increased density of surface–plasmon states, which was modified by the plasmon-dispersion relation at the planar Au/PMMA interface. By annealing the Au films to form a rough surface morphology, the emission in the CdS nanoparticles was further enhanced by the improved excitation and coupling of the surface–plasmon modes.     

Structural and functional stabilities of artificially designed DNA ultra-thin films grown by silica Assistance

We report the structural and functional stabilities of artificially synthesized DNA ultra-thin films. Fully covered DNA ultra-thin films on a silica substrate were fabricated by the silica-assisted growth method and those samples were then incubated in various chemicals and physical conditions. The DNA ultra-thin films showed high maintainability under those harsh conditions and these results would aid to facilitate the use of artificial DNA ultra-thin films in advanced research areas such as biophotonics and bioelectronics.     

Partial-wave decomposition of the ionization continuum accessed by vibrational autoionization of the NO 14s ( nu = 1, N = 20, N(+)(R) = 20) level

Rotationally resolved photoelectron angular distributions from vibrational autoionization of the NO 14s ( nu = 1, N = 20, N(+)(R) = 20) level are measured by photoelectron spectroscopy, and they are analyzed using a theoretical model based on first-order coupling between the Rydberg level and the ionization continuum. The analysis reveals that lambda-changing collisions and l-changing collisions between the molecular-ion core and the outgoing electron are comparable in magnitude and account for 40% of the partial waves produced in the ionization continuum.