Simultaneous Determination of Acetylsalicylic Acid and Caffeine in Pharmaceutical Formulation by First Derivative Synchronous Fluorimetric Method

A sensitive, rapid, and specific assay has been developed for the simultaneous determination of acetylsalicylic acid and caffeine in commercial tablets based on their natural fluorescence. The mixture of these drugs was resolved by first derivative synchronous fluorimetric technique using two scans. At Δλ=106 nm, using first derivative synchronous scanning, only acetylsalicylic acid yields a detectable signal at 316 nm (peak to zero method) which is unaffected by caffeine. At Δλ=30 nm, the signal of caffeine at 288 nm (peak to zero method) is not affected by acetylsalicylic acid. The range of application is between 0.021 and 41.62 μg ml⁻¹ (correlation coefficient, R=0.9995) for acetylsalicylic acid and between 0.4486 and 44.86 μg ml⁻¹ (correlation coefficient, R=0.99786) for caffeine. The recovery range of 98.40–102% for acetylsalicylic acid and 90–100.5% for caffeine from their synthetic mixture was reported. Overall recovery of both compounds about 97–99% for acetylsalicylic acid and 97–98% for caffeine was obtained from real sample analysis. The detection limits are 0.0013 μg ml⁻¹ and 0.0306 μg ml⁻¹ for acetylsalicylic acid and caffeine, respectively. The relative standard deviation (n=10) for 20 μg ml⁻¹ of acetylsalicylic acid is 2.75% and for 2.2 μg ml⁻¹of caffeine is 1.7%.     

Design of full-duplex and multifunction bidirectional CMOS transceiver for optical interconnect applications

This work presents a full-duplex and multifunction bidirectional transceiver for optical interconnect application. The transceiver utilizes a common limiting amplifier/gain stage, thus reducing total chip area and total power consumption. While providing a full-duplex bidirectional transmission with the aid of a hybrid circuit between the electrical input/output (I/O) and the optoelectronic signals from the transmitter and receiver circuits, it also allows for a half-duplex operation with the aid of a switch between the transimpedance amplifier signals and the transmitter electrical input from the I/O port. The multifunction bidirectional CMOS transceiver is designed in a 0.13 µm Si-CMOS technology, with power dissipation of 79 and 54.4 mW for the transmitter and receiver, respectively. It shows a 3-dB bandwidth of 5.58 and 5.69 GHz for the transmitter and the receiver respectively and with a 3-dB gain of 66.14 and 69.6 dB, in full-duplex mode. The transceiver operates up to 7 Gb/s in full-duplex mode.     

Comparison of catalytic activities for photocatalytic and sonocatalytic degradation of methylene blue in present of anatase TiO2-CNT catalysts

Anatase TiO(2)-CNT catalysts with high specific surface areas were prepared by depositing TiO(2) particles on the surface of carbon nanotubes (CNTs) using a modified sol-gel technique. These catalysts prepared with different amounts of CNTs were characterized by nitrogen adsorption, Fourier Transform infrared (FT-IR) spectroscopy, scanning electron microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), Raman spectroscopy, energy dispersive X-ray (EDX) and ultraviolet-visible (UV-Vis) spectroscopy. The catalytic activity of the anatase TiO(2)-CNT catalysts was assessed by examining the degradation of methylene blue (MB) from model aqueous solutions as a probe reaction under visible light and ultrasonic irradiation. The synergistic effect of the greater surface area and catalytic activities of the composite catalysts was examined in terms of the strong adsorption ability and interphase interaction by comparing the different amounts and roles of CNTs in the catalysts.     

Tunable nonlinear absorption of hydrogenated nanocrystalline silicon

Nonlinear absorption (NLA) of hydrogenated nanocrystalline silicon (nc-Si:H) has been investigated through the open aperture Z-scan method for the photon energy of the incident irradiance slightly less than the bandgap of the sample. NLA responses have been observed to be highly sensitive to the wavelength and intensity of the incident irradiance as well as to the bandgap of the sample, indicating greatly tunable NLA of nc-Si:H. The band tail of nc-Si:H appears to play a crucial role in such NLA responses.     

Investigation of the effect of electron cyclotron heating on runaway generation in the KSTAR tokamak

Wave enhanced runaway generation is expected to play an important role in the conversion of plasma current into runaway current during major disruptions. The fast electrons created by electron cyclotron heating (ECH) were used to study this issue in KSTAR. It is found that the fast electrons driven by ECH can enhance runaway production in the flat top phase with high loop voltage. The runaway current in disruptions was not enhanced by the ECH produced fast electron population due to the strong magnetic fluctuations which inhibited the generation of runaway electrons. It is found that a complete loss of existing REs during thermal quench has occurred in KSTAR limiter configuration discharges.     

Superior optical limiting, stabilization, and spatio-temporal reshaping of ultrashort laser pulses in an opto-stable intrinsic polymer film

A chemically modified poly(fluorene-alt-benzothiadiazole) (PFBT) polymer film is reported to exhibit high two-photon absorbing capability and chemical/physical stability upon the action of high-power laser pulses of ~780 nm wavelength and ~160 fs duration. A nonlinear transmission measurement is conducted by varying the input intensity from ~20 to ~600 GW/cm2, the corresponding nonlinear transmission of a ~70 μm thick film is reduced from ~0.8 to 0.18, indicating a superior optical limiting behavior. In the meantime, intensity fluctuation of laser pulses can be significantly reduced after passing through the same film sample. Based on the intensity-dependent nonlinear attenuation mechanism, a straightforward optical reshaping effect on spatio-temporal profiles of the laser pulses has also been demonstrated.     

Synthesis of core–shell nanoparticles with a Pt nanoparticle core and a silica shell

A method to prepare a core–shell structure consisting of a Pt metal core coated with a silica shell (Pt(in)SiO₂) is described herein. A silica shell was grown on poly(vinylpyrrolidone) (PVP)-stabilized Pt nanoparticles 2–3 nm in size through hydrolysis and condensation reactions of tetraethyl orthosilicate (TEOS) in a water/ethanol mixture with ammonia as a catalyst. This process requires precise control of the reaction conditions to avoid the formation of silica particles containing multiple Pt cores and core-free silica. The length of PVP molecules, water content, concentration of ammonia and Pt nanoparticles in solution were found to significantly influence the core–shell structure. By optimizing these parameters, it was possible to prepare core–shell particles each containing a single Pt nanoparticle with a silica layer coating approximately 10 nm thick.     

Molecular dynamics simulation study on graphene-nanoribbon-resonators tuned by adjusting axial strain

A tunable graphene-nanoribbon (GNR)-resonator was investigated via classical molecular dynamics simulations. Resonance frequencies increased with increasing externally applied gate-force and axial-strain, and could be tuned above several hundred GHz. Tunable resonance frequencies achieved from the gate force were higher than those achieved from the axial-strain. The operating frequencies of GNR-resonators without axial-strain or with small axial-strains were most widely tuned by the gate, and almost linearly increased with increasing mean deflection. As the axial strain increased, the tunable ranges of the GNR-resonators were exponentially decreased, although the operating frequencies increased. GNR-resonators without axial-strain could be applied to wide-range-tuners, whereas GNR-resonators with high axial-strain could be applied to high-frequency-fine-tuners.