Etching Characteristics and Mechanisms of Mo and Al2O3 Thin Films in O2/Cl2/Ar Inductively Coupled Plasmas: Effect of Gas Mixing Ratios

An investigation of etching behaviors for Mo and Al₂O₃ thin films in O₂/Cl₂/Ar inductively coupled plasmas at constant gas pressure (6 mTorr), input power (700 W) and bias power (200 W) was carried out. It was found that an increase in Ar mixing ratio for Cl₂/Ar plasma results in non-monotonic etching rates with the maximums of 160 nm/min at 60 % Ar for Mo and 27 nm/min at 20 % Ar for Al₂O₃. The addition of O₂ in the Cl₂/Ar plasma causes the non-monotonic Mo etching rate (max. 320 nm/min at 40–45 % O₂) while the Al₂O₃ etching rate decreases monotonically. The model-based analysis of etching kinetics allows one to relate the non-monotonic etching rates in Cl₂/Ar plasma to the change in the etching regime from the ion-flux-limited mode (at low Ar mixing ratios) to the neutral-flux-limited mode (for high Ar mixing ratios). In the Cl₂/O₂/Ar plasma, the non-monotonic Mo etching rate is probably due to the change in reaction probability.     

Construction of conformal mappings by generalized polarization tensors

We present a new systematic method to compute the Riemann mapping from the outside of the unit disc to the outside of a simply connected domain. We derive explicit relations between the coefficients of the Riemann mapping and the generalized polarization tensors associated with the domain. Because the generalized polarization tensors can be computed numerically, we are able to compute the coefficients of the Riemann mapping using these relations. Effectiveness of the method is validated by numerical examples. Copyright © 2014 John Wiley & Sons, Ltd.     

Thermal behaviors and kinetic analysis of two natural kaolinite samples selected from Qingshuihe region in Inner Mongolia in China

Journal of Thermal Analysis and Calorimetry - The thermal characteristic behaviors of two kaolinite samples selected from Qingshuihe region in Inner Mongolia in China were studied through...     

Magnetic interactions in the geometrically frustrated triangular lattice antiferromagnet CuFeO2

The spin-wave excitations of the geometrically frustrated triangular lattice antiferromagnet CuFeO2 have been measured using high resolution inelastic neutron scattering. Antiferromagnetic interactions up to third nearest neighbors in the ab plane (J1, J2, J3, with J{2}/J{1} approximately 0.44 and J{3}/J{1} approximately 0.57), as well as out-of-plane coupling (J{z}, with J{z}/J{1} approximately 0.29) are required to describe the spin-wave dispersion relations, indicating a three-dimensional character of the magnetic interactions. Two energy dips in the spin-wave dispersion occur at the incommensurate wave vectors associated with multiferroic phase and can be interpreted as dynamic precursors to the magnetoelectric behavior in this system.     

Observation of two resonant structures in e+ e- -->pi+ pi- psi(2S) via initial-state radiation at Belle

The cross section for e+ e- --> pi+ pi- psi(2S) between threshold and sqrt[s]=5.5 GeV is measured using 673 fb(-1) of data on and off the Upsilon(4S) resonance collected with the Belle detector at KEKB. Two resonant structures are observed in the pi+ pi- psi(2S) invariant-mass distribution, one at 4361 +/- 9 +/- 9 MeV/c2 with a width of 74 +/- 15 +/- 10 MeV/c2, and another at 4664 +/- 11 +/- 5 MeV/c2 with a width of 48 +/- 15 +/- 3 MeV/c2, if the mass spectrum is parametrized with the coherent sum of two Breit-Wigner functions. These values do not match those of any of the known charmonium states.     

Molecular theory of physical aging in polymer glasses

A molecular level theory for the physical aging of polymer glasses is proposed. The nonequilibrium time evolution of the amplitude of long wavelength density fluctuations, and its influence on activated barrier hopping, plays an essential role. The theory predicts temperature-dependent apparent power-law aging of the segmental relaxation time and logarithmic aging of thermodynamiclike properties, in good accord with experiments. A physical origin for the quantitative nonuniversal aspects based on the amplitude of quenched density fluctuations is suggested.     

Comment on "direct observation of laser filamentation in high-order harmonic generation"

We argue for a different physical interpretation of the results given in the recent Letter by Painter et al. [Opt. Lett.31, 3471 (2006)] in which an elongated Ti:saphire beam with two distinct waists is considered as direct evidence of laser filamentation. As the pulse power is well below the critical power for self-focusing, the authors pleaded for new examination of the n(2) value for He. A three-dimensional numerical modeling, using the published n(2) value for He, reproduces very well the measured data and invalidates the filamentation hypothesis.     

Effective changes in cellulose cell walls,gas permeability and sound absorption capability of Cocos nucifera (palmwood) by steam explosion

Steam explosion is a useful method to soften and dimensionally stabilizing wood. A significant increase in air permeability and sound absorption capability of steam-exploded palmwood compared to untreated palmwood is observed due to changes in cell wall. Cell wall’s changes are characterized by instrumental techniques such as Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscope and gas permeability by capillary flow porometry and sound absorption coefficient by two-microphone transfer function method. The average increase in air permeability (259.3%) and sound absorption coefficient (52.33% at frequency range of 250–6400 Hz) of steam-exploded samples is higher than that of untreated samples. Color of steam-exploded woods become black due to chemical reactions in cell wall during steam explosion. The color change, air permeability and sound absorption coefficient of wood are correlated with the findings. These results suggest that low-pressure steam explosion could be considered as an effective technique for improving the air permeability and sound absorption capability of palmwood in the longitudinal direction. This approach could be useful to manufacture sound absorption board to control the acoustical housing environment.