Field and flow programming in frit-inlet asymmetrical flow field-flow fractionation

The separation of wide molecular mass (Mr) ranges of macromolecules using frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) has been improved by implementing a combination of field and flow programming. In this first implementation, field strength (governed by the cross flow-rate through the membrane-covered accumulation wall) is decreased with time to obtain faster elution and improved detection of the more strongly retained (high Mr) materials. The channel outlet flow-rate is optionally held constant, increased, or decreased with time. With circulation of the flow exiting the accumulation wall to the inlet frit, the dual programming of cross flow and channel outlet flow could be implemented using just two pumps. With this flow configuration, the channel outlet flow-rate is always equal to the channel inlet flow-rate, and these may be programmed independently of the cross flow-rate through the membrane. FI-AFlFFF retains its operational advantage over conventional asymmetrical flow FFF (AFlFFF). Unlike conventional AFlFFF, FI-AFlFFF does not require time consuming, and experimentally inconvenient, sample focusing and relaxation steps involving valve switching and interruption of sample migration. The advantages of employing dual programming with FI-AFlFFF are demonstrated for sets of polystyrene sulfonate standards in the molecular mass range of 4 to 1000 kDa. It is shown that programmed FI-AFlFFF successfully expands the dynamic separation range of molecular mass.     

Macrocyclic polycther sulfide syntheses. The preparation of thia-crown-5, 6 and 7 compounds

Macroeyclic polyether sulfides have been prepared by reacting an oligoethylene glycol dichloride with a dimercaptan or sodium sulfide as reported in a previous paper (6). The following new compounds were prepared: 1,4,7-trithia(15-crown-5) (1); 1,4,10-trithia(15-crown-5) (II): 1,4,7,10-tetrathia(15-crown-5) (III); I-thia(18-crown-6) (IV); 1,4-dithia(18-crown-6) (V); 1,7-dithia(18-crown-6) (VI); 1,4,7-trithia(18-crown-6) (VII); 1,7-dithia(21-crown-7) (VIII); and 1,4,7-trithia(21-crown-7) (IX). The melting points of these and previously reported thia-crown compounds correlate with their structures. X-ray analyses of two thia-crown compounds indicate that the large sulfur atoms are directed away from the center of the ring.     

Dye-sensitized solar cells based on composite solid polymer electrolytes

The ionic conductivity of polymer electrolytes and their interfacial contact with dye-attached TiO2 particles were enhanced markedly by the addition of amorphous oligomer into polymer electrolytes, resulting in very high overall energy conversion efficiency.     

On the mechanism of reorientational and structural relaxation in supercooled liquids: the role of border dynamics and cooperativity

Molecular dynamics simulation and analysis based upon the many-body potential energy landscape (PEL) are employed to characterize single molecule reorientation and structural relaxation, and their interrelation, in deeply supercooled liquid CS(2). The rotational mechanism changes from small-step Debye diffusion to sudden large angle reorientation (SLAR) as the temperature falls below the mode-coupling temperature T(c). The onset of SLAR is explained in terms of the PEL; it is an essential feature of low-T rotational dynamics, along with the related phenomena of dynamic heterogeneity and the bifurcation of slow and fast relaxation processes. A long trajectory in which the system is initially trapped in a low energy local minimum, and eventually escapes, is followed in detail, both on the PEL and in real space. During the trapped period, "return" dynamics occurs, always leading back to the trap. Structural relaxation is identified with irreversible escape to a new trap. These processes lead to weak and strong SLAR, respectively; strong SLAR is a clear signal of structural relaxation. Return dynamics involves small groups of two to four molecules, while a string-like structure composed of all the active groups participates in the escape. It is proposed that, rather than simple, nearly instantaneous, one-dimensional barrier crossings, relaxation involves activation of the system to the complex, multidimensional region on the borders of the basins of attraction of the minima for an extended period.     

Total synthesis of 3,3′:4′,3″-ter-1,2,5-thiadiazole using a synthetic utility of S4N4·SbCl5 complex

3,3′:4′,3″-Ter-1,2,5-thiadiazole, an useful oligoheterocyclic compound, has been accomplished in seven steps from 1-(5-methyl-3-isoxazolyl)ethanone or diethyl acetylenedicarboxylate using a synthetic utility of tetrasulfur tetranitride antimony pentachloride (S₄N₄·SbCl₅) complex to make a 1,2,5-thiadiazole ring.     

An addition to the oxoacid family: H2B12(OH)12

The acid H(2)B(12)(OH)(12) can be isolated as a crystalline solid by protonation of the hydroxylated borane anion, B(12)(OH)(12)(2)(-). This acidic compound has low solubility in water, conducts protons in the solid state, and has thermal stability to a temperature of 400 degrees C. The conductivity mechanism is a Grotthuss mechanism with a low activation enthalpy (9-13 kcal/mol). This new acid represents an addition to the class of oxoacids, of which sulfuric and phosphoric acid are the most prominent examples.     

Octahedral cobalt(III) complexes of the chloropentammine type. XXVII. Effects of Methyl Substituents on reactivities of the cis-chloro-n-propylaminebis(ethylenediamine)-cobalt(III) cation

Salts of one isomeric form of the chloro-n-butylamine-, chloro-iso-butyl-amine- and chloro-sec-butylamine-bis(ethylenediamine)cobalt(III) cations have been prepared and characterised to have a cis-configuration (IR and VIS spectroscopy). Rate constants for their spontaneous aquation, mercury(II)-induced aquation and base hydrolysis have been determined and the activation parameters calculated. The results are compared with data obtained for the n-propylamine complex with a view to investigate the effects of methyl (α, β, γ) substituents on reactivities. The rate-determining dissociation of the outgoing group (Cl^? or HgCl⁺) takes place via either a square-pyramidal or a trigonal-bipyramidal intermediate, depending on whether the activation entropy is negative or positive.     

Surface-initiated growth of poly d(A-T) by Taq DNA polymerase

In this paper, we report surface-initiated d(A-T) polymerization by Taq DNA polymerase as a method for constructing DNA-tethered surfaces using an enzyme. The enzymatic polymerization was conducted successfully via two steps: tethering of oligo d(A-T)s onto the surface presenting carboxylic acids by amide coupling and surface-initiated polymerization using Taq DNA polymerase. In this enzymatic polymerization process, the design and construction of carboxylic acid-presenting surfaces were found to be an important factor: DNA growth did not occur on the gold surface coated only with the self-assembled monolayer (SAM) of 16-mercaptohexadecanoic acid (MHDA), but effectively proceeded on the surfaces presenting mixed SAMs of MHDA and 1-pentadecanethiol. The coupling of oligo d(A-T)s and the subsequent DNA polymerization reaction were characterized by polarized infrared external reflectance spectroscopy, ellipsometry, X-ray photoelectron spectroscopy, and atomic force microscopy.     

Enantioreversal in the sharpless asymmetric epoxidation reaction controlled by the molecular weight of a covalently appended achiral polymer

Polymers such as poly(ethylene glycol) (PEG) have proven use in a variety of applications including organic synthesis. We now disclose our investigations into the recently disputed report that PEG tartrate esters can reverse the enantioselectivity of the Sharpless asymmetric epoxidation reaction. The results presented herein have clarified that the enantioselectivity of this reaction can be reproducibly reversed solely as a function of the molecular weight of the appended PEG. By preparing a range of tartrate ligands with varying PEG chains lengths, the reversal was found to occur within a molecular weight change of only 800. As the PEG chain did not affect the inherent chirality of the ligand, the enantioreversal was proposed to occur as a result of two Ti-ligand complexes which differ in their molecularity of ligand, one monomeric in ligand and the other dimeric. Support for this hypothesis was given through equilibrium measurements which revealed that the predominant species in Ti/PEG tartrate ester mixtures is a distinct 2:1 Ti-ligand complex, as opposed to the 2:2 Ti-ligand complex of traditional Sharpless asymmetric epoxidations. In total, these data represent an unrecognized property of PEG-supported catalysts that could open up new venues in the control of asymmetric reactions by means of achiral appended polymers.     

De novo synthesis of stable tetrahydroporphyrinic macrocycles: bacteriochlorins and a tetradehydrocorrin

[structures: see text] Bacteriochlorins (tetrahydroporphyrins) are attractive for diverse photochemical applications owing to their strong absorption in the near-infrared spectral region, as exemplified by the bacterial photosynthetic pigment bacteriochlorophyll a, yet often are labile toward dehydrogenation to give the chlorin. Tetradehydrocorrins (ring-contracted tetrahydroporphyrins) are attractive for studies of catalysis analogous to that of vitamin B12. An eight-step synthesis toward such tetrahydroporphyrinic macrocycles begins with p-tolualdehyde and proceeds to a dihydrodipyrrin-acetal (1) bearing a geminal dimethyl group and a p-tolyl substituent. Self-condensation of 1 in CH3CN containing BF3 x OEt2 at room temperature afforded a readily separable mixture of two free base bacteriochlorins and a free base B,D-tetradehydrocorrin. Each bacteriochlorin contains two geminal dimethyl groups to lock-in the bacteriochlorin hydrogenation level, p-tolyl substituents at opposing (2,12) beta-positions, and the absence (H-BC) or presence (MeO-BC) of a methoxy group at the 5- (meso) position. The B,D-tetradehydrocorrin (TDC) lies equidistant between the hydrogenation levels of corrin and corrole, is enantiomeric, and contains two geminal dimethyl groups, 2,12-di-p-tolyl substituents, and an acetal group at the pyrroline-pyrrole junction. Examination of the effect of the concentrations of 1 (2.5-50 mM) and BF3 x OEt2 (10-500 mM) revealed a different response surface for each of H-BC, MeO-BC, and TDC, enabling relatively selective preparation of a given macrocycle. The highest isolated yield of each was 49, 30, and 66%, respectively. The macrocycles are stable to routine handling in light and air. The bacteriochlorins display characteristic spectral features; for example, H-BC exhibits near-IR absorption (lambda(Qy) = 737 nm, epsilon(Qy) = 130,000 M(-1) cm(-1)) and emission (lambda(em) = 744 nm, phi(f) = 0.14). In summary, this simple entry to stable bacteriochlorins and tetradehydrocorrins should facilitate a wide variety of applications.