Large‐scale extrusion processing and characterization of hybrid nylon‐6/SiO2 nanocomposites

Solution impregnations, pulltrusion and film stacking are widely used methods to prepare thermoplastic composite materials. Extruders are used to melt the polymer and to incorporate fibers into the polymer in order to modify physical properties. In this article, the compounding of colloidal silica nanoparticles filled polyamide‐6 (PA‐6) is achieved using a twin‐screw extruder, which has a significant market share due to its low cost and easy maintenance. The experiments were performed at 250 rpm and the bulk throughput was 6 kg h^?1 with a pump pressure of 30 bars. The composites were characterized with nuclear magnetic resonance (NMR), wide angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). As determined by WAXD, the PA‐6 showed higher amounts of γ‐phase when compared to other synthesis methods such as in situ polymerization. TEM pictures showed that the silica particles aggregated nevertheless, upon addition of 14% (w/w) silica the E‐modulus increased from 2.7 to 3.9 GPa indicating that an effective mechanical coupling with the polymer was achieved. The behavior, illustrated with dynamic mechanical analysis (DMA) curves, indicated that in general when a filled system is compared to unfilled material, the values of the moduli (E′ and E″) increased and tan δ decreased. Determination of molecular mass distribution of the samples by means of size exclusion chromatography (SEC) coupled to a refractive index (RI), viscosity (DV) and light scattering (LS) detector revealed that the addition of silica did not decrease the average molecular weight of the polymer matrix, which is of importance for composite applications. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and characterization of active ester-functionalized polypyrrole-silica nanoparticles: application to the covalent attachment of proteins

Novel ester-functionalized polypyrrole-silica nanocomposite particles were prepared by oxidative copolymerization of pyrrole and N-succinimidyl ester pyrrole (50/50% initial concentrations), using FeCl3 in the presence of ultrafine silica nanoparticles (20 nm diameter). The N-succinimidyl ester pyrrole monomer was prepared in aqueous solution using 1-(2-carboxyethylpyrrole) and N-hydroxysuccinimide in the presence of 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide. The resulting nanocomposites (N-succinimidyl ester polypyrrole-silica) are raspberry-shaped agglomerates of silica sol particles "glued" together by the insoluble poly(pyrrole-co-N-succinimidyl pyrrole). The N-succinimidyl ester polypyrrole-silica particles were characterized in terms of their size, density, copolymer content, and polydispersity. Scanning electron microscopy and disk centrifuge sedimentometry confirmed that the nanocomposite particles had narrow size distributions. X-ray photoelectron spectroscopy analysis indicated a silica-rich surface and a high surface concentration of N-succinimidyl ester groups. These nanoparticles exhibited good long-term dispersion stability. The chemical stability of the ester functions in aqueous media after several weeks of storage was monitored by FTIR spectroscopy. The functionalized nanocomposites were tested as bioadsorbents of human serum albumin (HSA). The very high amount of immobilized HSA determined by UV-visible spectroscopy is believed to be due to covalent binding. Incubation of the HSA-grafted nanocomposite with anti-HSA resulted in immediate flocculation, an indication that they are alternative candidates for visual diagnostic assays.     

Synthesis and properties of biodegradable elastomeric epoxy modified polyurethanes based on poly(ε-caprolactone) and poly(ethylene glycol)

Biodegradable polyurethane elastomers with potential for applications in medical implants with tunable degradation rate and physical properties were synthesized from reaction of epoxy terminated polyurethanes (EUP) with 1,6-hexamethylene diamine (HMDA) as curing agent. Poly(ε-caprolactone) (PCL) and poly(ethylene glycol) (PEG) as well as 1,6-hexamethylene diisocyanate (HDI) were used for preparation of isocyanate terminated polyurethanes which were subsequently blocked with glycidol to prepare EUPs. All materials were characterized by conventional methods, and their properties were studied fully. Results showed that elastomers based on PEG exhibit superior degradation rate and inferior mechanical properties in comparison to elastomers based on PCL. Optimum degradation rate and mechanical properties were obtained from elastomers made from mixture of PCL and PEG base EUPs.     

Ring-opening of unsymmetrical 1,2-dioxines using cobalt(II) salen complexes

The regioselectivity of the metal-catalyzed ring opening of unsymmetrical 1,2-dioxines to cis-gamma-hydroxyenones was investigated using two different Co(II) salen complexes. Regioselectivity was determined by direct examination of the enone ratios and by derivitization with a stabilized phosphorus ylide. The steric influence of the substituents on the 1,2-dioxine was the primary influence on regioselectivity. Temperature played little role; however, solvent and selection of Co(II) complex could be used to mildly influence the outcome of the rearrangement for selected substrates. The origins of the selectivity for the reaction are discussed.     

Structure of microemulsions with gemini surfactant studied by solvatochromic probe and diffusion NMR

The structure of microemulsions prepared by the anionic gemini surfactant didodecyl diphenyl ether disulfonate (C12-DADS) was investigated by a solvatochromic probe and nuclear magnetic resonance (NMR) diffusion measurements. The NMR measurements indicate the presence of bicontinuous and oil-in-water microemulsions depending on microemulsion composition. The absorbance spectra of the solvatochromic probe, Nile red, indicate the solubilization of the probe in different sites, in agreement with the NMR findings. It was also found that the microemulsions were capable of dissolving the hydrophobic probe, Nile red, up to four times better than expected if it were simply dissolved in the toluene phase.     

Fluorescence resonance energy transfer between quantum dot donors and dye-labeled protein acceptors

We used luminescent CdSe-ZnS core-shell quantum dots (QDs) as energy donors in fluorescent resonance energy transfer (FRET) assays. Engineered maltose binding protein (MBP) appended with an oligohistidine tail and labeled with an acceptor dye (Cy3) was immobilized on the nanocrystals via a noncovalent self-assembly scheme. This configuration allowed accurate control of the donor-acceptor separation distance to a range smaller than 100 A and provided a good model system to explore FRET phenomena in QD-protein-dye conjugates. This QD-MBP conjugate presents two advantages: (1) it permits one to tune the degree of spectral overlap between donor and acceptor and (2) provides a unique configuration where a single donor can interact with several acceptors simultaneously. The FRET signal was measured for these complexes as a function of both degree of spectral overlap and fraction of dye-labeled proteins in the QD conjugate. Data showed that substantial acceptor signals were measured upon conjugate formation, indicating efficient nonradiative exciton transfer between QD donors and dye-labeled protein acceptors. FRET efficiency can be controlled either by tuning the QD photoemission or by adjusting the number of dye-labeled proteins immobilized on the QD center. Results showed a clear dependence of the efficiency on the spectral overlap between the QD donor and dye acceptor. Apparent donor-acceptor distances were determined from efficiency measurements and corresponding F?rster distances, and these results agreed with QD bioconjugate dimensions extracted from structural data and core size variations among QD populations.     

Fast surface immobilization of native proteins through catalyst-free amino-yne click bioconjugation

Surface immobilization provides a useful platform for biosensing, drug screening, tissue engineering and other chemical and biological applications. However, some of the used reactions are inefficient and/or complicated, limiting their applications in immobilization. Herein, we use a spontaneous and catalyst-free amino-yne click bioconjugation to generate activated ethynyl group functionalized surfaces for fast immobilization of native proteins and cells. Biomolecules, such as bovine serum albumin (BSA), human IgG and a peptide of C(RGDfK), could be covalently immobilized on the surfaces in as short as 30 min. Notably, the bioactivity of the anchored biomolecules remains intact, which is verified by efficiently capturing target antibodies and cells from the bulk solutions. This strategy represents an alternative for highly efficient surface biofunctionalization.

Fast surface immobilization of native bioconjugates through a spontaneous amino-yne click reaction is realized.     

Structural variation in organically templated uranium sulfate fluorides

The ability of templated uranium sulfate fluorides to adopt diverse inorganic architectures is demonstrated in six novel materials. The inorganic structures present in [N2C6H16][UO2F2(SO4)](USFO-2), [N2C6H16][UO2F(SO4)]2(USFO-3), [N2C3H12][UO2F(SO4)]2.H2O (USFO-4), [N2C5H14][UO2F(H2O)(SO4]2(USFO-5), [N2C6H18]2[UO2F(SO4)]4.H2O (USFO-6) and [N2C3H12][UO2F(SO4)]2.H2O (USFO-7) range from infinite chains to five different layer topologies. The chain, and two of the five layers, have unprecedented structure types. These compounds illustrate the structural diversity within this new family of materials, arising from the varied coordination of the U6+ centres. Each material was synthesised under hydrothermal conditions, through reaction of uranyl acetate, sulfuric acid, HF(aq), water, and the respective organic template.     

Förster Resonance Energy Transfer Investigations Using Quantum‐Dot Fluorophores

F?rster resonance energy transfer (FRET), which involves the nonradiative transfer of excitation energy from an excited donor fluorophore to a proximal ground-state acceptor fluorophore, is a well-characterized photophysical tool. It is very sensitive to nanometer-scale changes in donor-acceptor separation distance and their relative dipole orientations. It has found a wide range of applications in analytical chemistry, protein conformation studies, and biological assays. Luminescent semiconductor nanocrystals (quantum dots, QDs) are inorganic fluorophores with unique optical and spectroscopic properties that could enhance FRET as an analytical tool, due to broad excitation spectra and tunable narrow and symmetric photoemission. Recently, there have been several FRET investigations using luminescent QDs that focused on addressing basic fundamental questions, as well as developing targeted applications with potential use in biology, including sensor design and protein conformation studies. Herein, we provide a critical review of those developments. We discuss some of the basic aspects of FRET applied to QDs as both donors and acceptors, and highlight some of the advantages offered (and limitations encountered) by QDs as energy donors and acceptors compared to conventional dyes. We also review the recent developments made in using QD bioreceptor conjugates to design FRET-based assays.     

In search of covalently bound tetra- and penta-oxygen species: a photoelectron spectroscopic and Ab initio investigation of MO4- and MO5- (M = Li,Na, K,Cs)

Although neutral and ionic O4(0/-/+) species have been observed experimentally and considered for energetic materials, O4(2-) and O5(2-) dianions have not yet been explored. O4(2-) is valent isoelectronic to the well-known ClO3- and SO3(2-) anions, and O5(2-) is valent isoelectronic to ClO4- and SO4(2-). All are stable, common anions in solutions and inorganic salts. In this article, we explore the possibility of making covalently bound O4(2-) and O5(2-) species stabilized in the forms of M+O4(2-) and M+O5(2-) (M = Li, Na, K, Cs) in the gas phase. Laser vaporization experiments using M-containing targets and an O2-seeded carrier gas yielded very intense mass peaks corresponding to MO4- and MO5-. To elucidate the structure and bonding of the newly observed MO4- and MO5- species, we measured their photoelectron spectra and then compared them with ab initio calculations and the spectra of ClO3-, Na+SO3(2-), ClO4-, and Na+SO4(2-). Careful analyses of the experimental and ab initio results showed, however, that the observed species are of the forms, O2-M+O2- and O2-M+O3-. The more interesting M+O4(2-) and M+O5(2-) species were found to be higher-energy isomers, but they are true minima on the potential energy surfaces, which suggests that it might be possible to synthesize bulk materials containing covalently bound tetra- and pentatomic oxygen building blocks.