Trace level vanadium determination using thermal lens spectrophotometry

Trace level vanadium determination is reported using a dual beam thermal lens spectrometer. The thermal lens was generated using an argon ion beam laser (pump beam) which was focused into a sample cuvette. The thermal lens signal (TLs) was monitored with a He-Ne laser beam and a photodiode detector. Multichannel averager software was developed for processing the transient TLs. The optimal set up, ensuring maximum sensitivity and linear calibration graphs was obtained using experimental design techniques. Under optimized conditions, the detection limits for aqueous and ethanol-water (2+3 v/v) and (4+1 v/v) vanadium complex solutions were, respectively, 0.0071 mg/l, 0.0065 and 0.0039 mg/l.     

Spectra and dose with ANN of 252Cf, 241Am–Be, and 239Pu–Be

Artificial neural networks have been applied to unfold the neutron spectra and to calculate the effective dose, the ambient equivalent dose, and the personal dose equivalent for ²⁵²Cf, ²⁴¹Am–Be, and ²³⁹Pu–Be neutron sources. The count rates that these neutron sources produce in a Bonner Sphere Spectrometer with a ⁶LiI(Eu) were utilized as input in both artificial neural networks. Spectra and the ambient dose equivalent were also obtained with BUNKIUT code and the UTA4 response matrix. With both procedures spectra and ambient dose equivalent agrees in less than 10%. The Artificial neural network technology is an alternative procedure to unfold neutron spectra and to perform neutron dosimetry.     

Mixtures of sodium dodecyl sulfate/dodecanol at the air/water interface by computer simulations

Molecular dynamics simulations of monolayers of surfactant mixtures at the air/water interface were performed where the binary mixture was composed of sodium dodecyl sulfate (SDS) and dodecanol molecules. At the same ratio of SDS and dodecanol molecules, two monolayer mixtures were prepared. In the first monolayer, all the dodecanol molecules were placed together in the center of the simulation box, whereas in the second monolayer, those molecules were uniformly distributed in the surface area in such a way that they were far from each other. Simulations of both systems indicate that the dodecanol tails in the first monolayer are straighter and more ordered than those in the second monolayer. From the present results, we observed new insights of how the different molecules should array or distribute at the interface in real systems. Finally, studies of the interfacial water around the different surfactants were also analyzed, showing that they are closer to the polar headgroups of dodecanol than to the SDS headgroups.     

Mechanistic studies of ethylene hydrophenylation catalyzed by bipyridyl Pt(II) complexes

Cationic platinum(II) complexes [((t)bpy)Pt(Ph)(L)](+) [(t)bpy =4,4'-di-tert-butyl-2,2'-bipyridyl; L = THF, NC(5)F(5), or NCMe] catalyze the hydrophenylation of ethylene to generate ethylbenzene and isomers of diethylbenzene. Using ethylene as the limiting reagent, an 89% yield of alkyl arene products is achieved after 4 h at 120 °C. Catalyst efficiency for ethylene hydrophenylation is diminished only slightly under aerobic conditions. Mechanistic studies support a reaction pathway that involves ethylene coordination to Pt(II), insertion of ethylene into the Pt-phenyl bond, and subsequent metal-mediated benzene C-H activation. Studies of stoichiometric benzene (C(6)H(6) or C(6)D(6)) C-H/C-D activation by [((t)bpy)Pt(Ph-d(n))(THF)](+) (n = 0 or 5) indicate a k(H)/k(D) = 1.4(1), while comparative rates of ethylene hydrophenylation using C(6)H(6) and C(6)D(6) reveal k(H)/k(D) = 1.8(4) for the overall catalytic reaction. DFT calculations suggest that the transition state for benzene C-H activation is the highest energy species along the catalytic cycle. In CD(2)Cl(2), [((t)bpy)Pt(Ph)(THF)][BAr'(4)] [Ar' = 3,5-bis(trifluoromethyl)phenyl] reacts with ethylene to generate [((t)bpy)Pt(CH(2)CH(2)Ph)(η(2)-C(2)H(4))][BAr'(4)] with k(obs) = 1.05(4) × 10(-3) s(-1) (23 °C, [C(2)H(4)] = 0.10(1) M). In the catalytic hydrophenylation of ethylene, substantial amounts of diethylbenzenes are produced, and experimental studies suggest that the selectivity for the monoalkylated arene is diminished due to a second aromatic C-H activation competing with ethylbenzene dissociation.     

Synthesis and characterization of (smif)2M(n) (n = 0, M = V, Cr, Mn, Fe, Co, Ni, Ru; n = +1, M = Cr, Mn, Co, Rh, Ir; smif =1,3-di-(2-pyridyl)-2-azaallyl)

A series of Werner complexes featuring the tridentate ligand smif, that is, 1,3-di-(2-pyridyl)-2-azaallyl, have been prepared. Syntheses of (smif)(2)M (1-M; M = Cr, Fe) were accomplished via treatment of M(NSiMe(3))(2)(THF)(n) (M = Cr, n = 2; Fe, n = 1) with 2 equiv of (smif)H (1,3-di-(2-pyridyl)-2-azapropene); ortho-methylated ((o)Mesmif)(2)Fe (2-Fe) and ((o)Me(2)smif)(2)Fe (3-Fe) were similarly prepared. Metatheses of MX(2) variants with 2 equiv of Li(smif) or Na(smif) generated 1-M (M = Cr, Mn, Fe, Co, Ni, Zn, Ru). Metathesis of VCl(3)(THF)(3) with 2 Li(smif) with a reducing equiv of Na/Hg present afforded 1-V, while 2 Na(smif) and IrCl(3)(THF)(3) in the presence of NaBPh(4) gave [(smif)(2)Ir]BPh(4) (1(+)-Ir). Electrochemical experiments led to the oxidation of 1-M (M = Cr, Mn, Co) by AgOTf to produce [(smif)(2)M]OTf (1(+)-M), and treatment of Rh(2)(O(2)CCF(3))(4) with 4 equiv Na(smif) and 2 AgOTf gave 1(+)-Rh. Characterizations by NMR, EPR, and UV-vis spectroscopies, SQUID magnetometry, X-ray crystallography, and DFT calculations are presented. Intraligand (IL) transitions derived from promotion of electrons from the unique CNC(nb) (nonbonding) orbitals of the smif backbone to ligand π*-type orbitals are intense (ε ≈ 10,000-60,000 M(-1)cm(-1)), dominate the UV-visible spectra, and give crystals a metallic-looking appearance. High energy K-edge spectroscopy was used to show that the smif in 1-Cr is redox noninnocent, and its electron configuration is best described as (smif(-))(smif(2-))Cr(III); an unusual S = 1 EPR spectrum (X-band) was obtained for 1-Cr.     

Bile UPLC-MS fingerprinting and bile acid fluxes during human liver transplantation

Bile flow restoration is a crucial step in the recovery process post transplantation of the liver. Here, metabolic trajectories based on changes in bile secretion - a known marker of functionality - have been utilised as an approach for discovering bile fluxes during transplantation. A total of ten liver transplants were monitored and from these 68 bile samples from both donors and recipients were collected and analysed using ultra-performance LC-MS in combination with multivariate statistical analysis. Based on the principal component scores constructed from the total bile fingerprint, differentiation of the bile acid concentrations before and after transplantation was detected. A trend was also observed, by constructing metabolic trajectories, whereby the post-transplant profiles approached the position of pre-transplant profiles within 30-60?min of the restoration of bile secretion function. The ten major conjugated bile acid salts were measured and a significant increase in concentrations of taurocholic acid and taurochenodeoxycholic acid were seen after transplantation. In addition, the ratios of secondary bile acids detected in gall bladder and hepatic bile were measured before and after transplantation. This study suggests that bile acid ratios in the donor liver at the pre-transplant and post-transplant stage may be important and that profiling of secreted bile after transplantation may aid clinical assessment and progress post-transplantation.     

Efficient Screening for Ternary Molecular Ionic Cocrystals Using a Complementary Mechanosynthesis and Computational Structure Prediction Approach

The discovery of molecular ionic cocrystals (ICCs) of active pharmaceutical ingredients (APIs) widens the opportunities for optimizing the physicochemical properties of APIs whilst facilitating the delivery of multiple therapeutic agents. However, ICCs are often observed serendipitously in crystallization screens and the factors dictating their crystallization are poorly understood. We demonstrate here that mechanochemical ball milling is a versatile technique for the reproducible synthesis of ternary molecular ICCs in less than 30 min of grinding with or without solvent. Computational crystal structure prediction (CSP) calculations have been performed on ternary molecular ICCs for the first time and the observed crystal structures of all the ICCs were correctly predicted. Periodic dispersion-corrected DFT calculations revealed that all the ICCs are thermodynamically stable (mean stabilization energy=−2 kJ mol⁻¹) relative to the crystallization of a physical mixture of the binary salt and acid. The results suggest that a combined mechanosynthesis and CSP approach could be used to target the synthesis of higher-order molecular ICCs with functional properties.     

Metabolic profiling of rodent biological fluids via 1H NMR spectroscopy using a 1 mm microlitre probe

The application of a 1 mm TXI (1H/13C/15N) microlitre NMR probe with z-gradient for metabolic profiling of biofluids is described. The probe was used to provide spectral profiles for rat blood plasma using only approximately 2 microl of fluid with a range of solvent suppression techniques. Using a similar amount of fluid, spectra were obtained from rat and mouse cerebrospinal fluid, demonstrating that the probe could be used to profile rodents metabolically via biofluids previously inaccessible to NMR analysis without the need for termination.     

Reproducibility of the pyrolysis—gas chromatography of the cis-1,4-polyisoprenes NR and IR: Influence of the chromatographic separation

Good reproducibility of the pyrolysis—gas chromatography of vulcanized rubbers is difficult because of their insolubility, the presence of additives and the complexity of the pyrograms. With cis-1,4-polyisoprenes, the quantitative results are considerably improved by using a high-resolution glass capillary column instead of a packed column. The relative standard deviation is about 1% for the main peaks and is still less than 5% for several small peaks.     

A straightforward synthesis and structure of unprecedented iminium salts of dihydropyrido[3,2-e][1,3]thiazines

Unprecedented 2-iminium chloride salts of 5,8-dihydro-2H-pyrido[3,2-e][1,3]thiazines derivatives (8) were easily synthesized in one step from the corresponding o-chloroformyl-1,4-dihydropyridine (2) and thiourea. The structural study has been carried out by X-ray crystallography and theoretical calculations at the B3LYP/6-31G* levels and reveal that the new salts exhibit appropriate structural features to behave as calcium channel modulators.