Microfluidic devices for energy conversion: planar integration and performance of a passive, fully immersed H2-O2 fuel cell

We describe the fabrication and performance of a passive, microfluidics-based H2-O2 microfluidic fuel cell using thin film Pt electrodes embedded in a poly(dimethylsiloxane) (PDMS) device. The electrode array is fully immersed in a liquid electrolyte confined inside the microchannel network, which serves also as a thin gas-permeable membrane through which the reactants are fed to the electrodes. The cell operates at room temperature with a maximum power density of around 700 microW/cm(2), while its performance, as recorded by monitoring the corresponding polarization curves and the power density plots, is affected by the pH of the electrolyte, its concentration, the surface area of the Pt electrodes, and the thickness of the PDMS membrane. The best results were obtained in basic solutions using electrochemically roughened Pt electrodes, the roughness factor, R(f), of which was around 90 relative to a smooth Pt film. In addition, the operating lifetime of the fuel cell was found to be longer for the one using higher surface area electrodes.     

The d'--d--d' vertical triad is less discriminating than the a'--a--a' vertical triad in the antiparallel coiled-coil dimer motif

Elucidating relationships between the amino-acid sequences of proteins and their three-dimensional structures, and uncovering non-covalent interactions that underlie polypeptide folding, are major goals in protein science. One approach toward these goals is to study interactions between selected residues, or among constellations of residues, in small folding motifs. The α-helical coiled coil has served as a platform for such studies because this folding unit is relatively simple in terms of both sequence and structure. Amino acid side chains at the helix-helix interface of a coiled coil participate in so-called "knobs-into-holes" (KIH) packing whereby a side chain (the knob) on one helix inserts into a space (the hole) generated by four side chains on a partner helix. The vast majority of sequence-stability studies on coiled-coil dimers have focused on lateral interactions within these KIH arrangements, for example, between an a position on one helix and an a' position of the partner in a parallel coiled-coil dimer, or between a--d' pairs in an antiparallel dimer. More recently, it has been shown that vertical triads (specifically, a'--a--a' triads) in antiparallel dimers exert a significant impact on pairing preferences. This observation provides impetus for analysis of other complex networks of side-chain interactions at the helix-helix interface. Here, we describe a combination of experimental and bioinformatics studies that show that d'--d--d' triads have much less impact on pairing preference than do a'--a--a' triads in a small, designed antiparallel coiled-coil dimer. However, the influence of the d'--d--d' triad depends on the lateral a'--d interaction. Taken together, these results strengthen the emerging understanding that simple pairwise interactions are not sufficient to describe side-chain interactions and overall stability in antiparallel coiled-coil dimers; higher-order interactions must be considered as well.     

Controllable donor-acceptor neutral [2]rotaxanes

In pursuit of a neutral bistable [2]rotaxane made up of two tetraarylmethane stoppers--both carrying one isopropyl and two tert-butyl groups located at the para positions on each of three of the four aryl rings--known to permit the slippage of the pi-electron-donating 1,5-dinaphtho[38]crown-10 (1/5DNP38C10) at the thermodynamic instigation of pi-electron-accepting recognition sites, in this case, pyromellitic diimide (PmI) and 1,4,5,8-naphthalenetetracarboxylate diimide (NpI) units separated from each other along the rod section of the rotaxane's dumbbell component, and from the para positions of the fourth aryl group of the two stoppers by pentamethylene chains, a modular approach was employed in the synthesis of the dumbbell-shaped compound NpPmD, as well as of its two degenerate counterparts, one (PmPmD) which contains two PmI units and the other (NpNpD) which contains two NpI units. The bistable [2]rotaxane NpPmR, as well as its two degenerate analogues PmPmR and NpNpR, were obtained from the corresponding dumbbell-shaped compounds NpPmD, PmPmD, and NpNpD and 1/5DNP38C10 by slippage. Dynamic 1H NMR spectroscopy in CD2Cl2 revealed that shuttling of the 1/5DNP38C10 ring occurs in NpNpR and PmPmR, with activation barriers of 277 K of 14.0 and 10.9 kcal mol(-1), respectively, reflecting a much more pronounced donor-acceptor stabilizing interaction involving the NpI units over the PmI ones. The photophysical and electrochemical properties of the three neutral [2]rotaxanes and their dumbbell-shaped precursors have also been investigated in CH2Cl2. Interactions between 1/5DNP38C10 and PmI and NpI units located within the rod section of the dumbbell components of the [2]rotaxane give rise to the appearance of charge-transfer bands, the energies of which correlate with the electron-accepting properties of the two diimide moieties. Comparison between the positions of the visible absorption bands in the three [2]rotaxanes shows that, in NpPmR, the major translational isomer is the one in which 1/5DNP38C10 encircles the NpI unit. Correlations of the reduction potentials for all the compounds studied confirm that, in this non-degenerate [2]rotaxane, one of the translational isomers predominates. Furthermore, after deactivation of the NpI unit by one-electron reduction, the 1/5DNP38C10 macrocycle moves to the PmI unit. Li+ ions have been found to strengthen the interaction between the electron-donating crown ether and the electron-accepting diimide units, particularly the PmI one. Titration experiments show that two Li+ ions are involved in the strengthening of the donor-acceptor interaction. Addition of Li+ ions to NpPmR induces the 1/5DNP38C10 macrocycle to move from the NpI to the PmI unit. The Li+-ion-promoted switching of NpPmR in a 4:1 mixture of CD2Cl2 and CD3COCD3 has also been shown by 1H NMR spectroscopy to involve the mechanical movement of the 1/5DNP38C10 macrocycle from the NpI to the PmI unit, a process that can be reversed by adding an excess of [12]crown-4 to sequester the Li+ ions.     

Solution NMR approaches for establishing specificity of weak heterodimerization of membrane proteins

Solution NMR provides a powerful approach for detecting complex formation involving weak to moderate intermolecular affinity. However, solution NMR has only rarely been used to detect complex formation between two membrane proteins in model membranes. The impact of specific binding on the NMR spectrum of a membrane protein can be difficult to distinguish from spectral changes that are induced by nonspecific binding and/or by changes that arise from forced cohabitation of the two proteins in a single model membrane assembly. This is particularly the case when solubility limits make it impossible to complete a titration to the point of near saturation of complex formation. In this work experiments are presented that provide the basis for establishing whether specific complex formation occurs between two membrane proteins under conditions where binding is not of high avidity. Application of these methods led to the conclusion that the membrane protein CD147 (also known as EMMPRIN or basigin) forms a specific heterodimeric complex in the membrane with the 99-residue transmembrane C-terminal fragment of the amyloid precursor protein (C99 or APP-βCTF), the latter being the immediate precursor of the amyloid-β polypeptides that are closely linked to the etiology of Alzheimer's disease.     

Bile UPLC-MS fingerprinting and bile acid fluxes during human liver transplantation

Bile flow restoration is a crucial step in the recovery process post transplantation of the liver. Here, metabolic trajectories based on changes in bile secretion - a known marker of functionality - have been utilised as an approach for discovering bile fluxes during transplantation. A total of ten liver transplants were monitored and from these 68 bile samples from both donors and recipients were collected and analysed using ultra-performance LC-MS in combination with multivariate statistical analysis. Based on the principal component scores constructed from the total bile fingerprint, differentiation of the bile acid concentrations before and after transplantation was detected. A trend was also observed, by constructing metabolic trajectories, whereby the post-transplant profiles approached the position of pre-transplant profiles within 30-60?min of the restoration of bile secretion function. The ten major conjugated bile acid salts were measured and a significant increase in concentrations of taurocholic acid and taurochenodeoxycholic acid were seen after transplantation. In addition, the ratios of secondary bile acids detected in gall bladder and hepatic bile were measured before and after transplantation. This study suggests that bile acid ratios in the donor liver at the pre-transplant and post-transplant stage may be important and that profiling of secreted bile after transplantation may aid clinical assessment and progress post-transplantation.     

Mixed-valence, mixed-spin-state, and heterometallic [2x2] grid-type arrays based on heteroditopic hydrazone ligands: synthesis and electrochemical features

An extended family of heterometallic [(M1)2(M2)2(L-)4](n+) [2x2] grid-type arrays 1-9 has been prepared. The three-tiered synthetic route encompasses regioselective, redox and enantioselective features and is based on the stepwise construction of heteroditopic hydrazone ligands A-C. These ligands contain ionisable NH and nonionisable NMe hydrazone units, which allows the metal redox properties to be controlled according to the charge on the ligand binding pocket. The 2-pyrimidine (R) and 6-pyridine (R') substituents have a significant effect on complex geometry and influence both the electrochemical and magnetic behaviour of the system. 1H NMR spectroscopic studies show that the Fe(II) ions in the grid can be low spin, high spin or spin crossover depending on the steric effect of substituents R and R'. This steric effect has been manipulated to construct an unusual array possessing two low-spin and two spin-crossover Fe(II) centres (grid 8). Electrochemical studies were performed for the grid-type arrays 1-9 and their respective mononuclear precursor complexes 10-13. The grids function as electron reservoirs and display up to eight monoelectronic, reversible reduction steps. These processes generally occur in pairs and are assigned to ligand-based reductions and to the Co(III)/Co(II) redox couple. Individual metal ions in the heterometallic grid motif can be selectively addressed electrochemically (e.g., either the Co(III) or Fe(II) ions can be targeted in grids 2 and 5). The Fe(II) oxidation potential is governed by the charge on the ligand binding unit, rather than the spin state, thus permitting facile electrochemical discrimination between the two types of Fe(II) centre in 7 or in 8. Such multistable heterometallic [2x2] gridlike arrays are of great interest for future supramolecular devices incorporating multilevel redox activity.     

Discovery of linear receptors for multiple dihydrogen phosphate ions using dynamic combinatorial chemistry

We describe the use of dynamic combinatorial chemistry to discover a new series of linear hydrazone-based receptors that bind multiple dihydrogen phosphate ions. Through the use of a template-driven, selection-based approach to receptor synthesis, dynamic combinatorial chemistry allows for the identification of unexpected host structures and binding motifs. Notably, we observed the unprecedented selection of these linear receptors in preference to competing macrocyclic hosts. Furthermore, linear receptors containing up to nine building blocks and three different building blocks were amplified in the dynamic combinatorial library. The receptors were formed using a dihydrazide building block based on an amino acid-disubstituted ferrocene scaffold. A detailed study of the linear pentamer revealed that it forms a helical ditopic receptor that employs four acylhydrazone hydrogen-bond donor motifs to cooperatively bind two dihydrogen phosphate ions.     

Chemistry of the phenoxathiins and isosterically related heterocycles. XXXII . The synthesis of 2-azathianthrene and selected analogs

The synthesis of 2-azathianthrene ([1,4]benzodithiino[2,3-c]pyridine), the only remaining monoazathianthrene yet to be reported, is described. Attempts at the direct condensation of disubstituted pyridines with the dianion of 1,2-dimercaptobenzene were generally unsuccessful requiring that the alternative condensation of the dianion with disubstituted pyridine 1-oxides be employed. The title compound was characterized by physical means including ¹³C-nmr spectroscopy. One analog, 4-nitro-2-azathianthrene was also studied by X-ray crystallographic means; the molecule crystallized with two molecules in the asymmetric unit P2₁/n, a = 20.712(3), b = 7.8109(13), c = 13.720(2)Å, β = 107.880(11)°, Z = 8, the data refined to a final R = 0.051 for 3061 reflections. Dihedral angles between the planes of the phenyl rings were 135.00(13) and 132.52(13)° for the two independent molecules contained in the crystal. Close non? bonded S ?O intramolecular contacts were observed in both molecules between the sulfur and nitro-group oxygens. Both nitro groups are twisted out of the plane of the pyridine ring and are oriented at angles of 28.75 and 38.82° respectively.     

Crystal polymorphism of protein GB1 examined by solid-state NMR spectroscopy and X-ray diffraction

The study of micro- or nanocrystalline proteins by magic-angle spinning (MAS) solid-state NMR (SSNMR) gives atomic-resolution insight into structure in cases when single crystals cannot be obtained for diffraction studies. Subtle differences in the local chemical environment around the protein, including the characteristics of the cosolvent and the buffer, determine whether a protein will form single crystals. The impact of these small changes in formulation is also evident in the SSNMR spectra; however, the changes lead only to correspondingly subtle changes in the spectra. Here, we demonstrate that several formulations of GB1 microcrystals yield very high quality SSNMR spectra, although only a subset of conditions enable growth of single crystals. We have characterized these polymorphs by X-ray powder diffraction and assigned the SSNMR spectra. Assignments of the 13C and 15N SSNMR chemical shifts confirm that the backbone structure is conserved, indicative of a common protein fold, but side chain chemical shifts are changed on the surface of the protein, in a manner dependent upon crystal packing and electrostatic interactions with salt in the mother liquor. Our results demonstrate the ability of SSNMR to reveal minor structural differences among crystal polymorphs. This ability has potential practical utility for studying the formulation chemistry of industrial and therapeutic proteins, as well as for deriving fundamental insights into the phenomenon of single-crystal growth.     

Infrared and Raman spectra, conformational stability, ab initio calculations, and vibrational assignments for methylaminothiophosphoryl difluoride

Infrared spectra (4000–50 cm⁻¹) of the vapor, amorphous and crystalline solids and Raman spectra (3600–10 cm⁻¹) of the liquid with qualitative depolarization data as well as the amorphous and crystalline solids of methylaminothiophosphoryl difluoride, CH₃N(H)P(=S)F₂, and three deuterated species, CD₃N(H)P(=S)F₂, CH₃N(D)P(=S)F₂, and CD₃N(D)P(=S)F₂, have been recorded. The spectra indicate that in the vapor, liquid and amorphous solid a small amount of a second conformer is present, whereas only one conformer remains in the low temperature crystalline phase. The near-infrared spectra of the vapor confirms the existence of two conformers in the gas phase. Asymmetric top contour simulation of the vapor shows that the trans conformer is the predominant vapor phase conformer. From a temperature study of the Raman spectrum of the liquid the enthalpy difference between the trans and near-cis conformers was determined to be 368±15 cm⁻¹ (4.41±0.2 kJ/mol), with the trans conformer being thermodynamically preferred. Ab Initio calculations with structure optimization using the 6-31G(d) and 6-311+G(d,p) basis sets at the restricted Hartree–Fock (RHF) and/or with full electron correlation by the perturbation method to second order (MP2) support the occurrence of near-trans (5° from trans) and near-cis (20° from cis) conformers. From the RHF/6-31G(d) calculation the near-trans conformer is predicted to be the more stable form by 451 cm⁻¹ (5.35 kJ/mol) and from the MP2/6-311+G(d,p) calculation by 387 cm⁻¹ (4.63 kJ/mol). All of the normal modes of the near-trans rotamer have been assigned based on infrared band contours, depolarization values and group frequencies and the assignment is supported by the normal coordinate calculation utilizing harmonic force constants from the MP2/6-31G(d) ab initio calculations.