聚集态的Fe氧化物在Fe/ZSM-5催化N_2O直接分解中的作用(英文)

研究了以离子交换法制备的Fe/ZSM-5上聚合态的Fe氧化物(FeOx)在催化N2O直接分解中的作用.Fe/ZSM-5催化剂利用600–900 ℃的高纯Ar处理,使催化剂中的FeOx发生聚合.利用一系列的表征手段(XRD,BET,DRIFTS,UV/vis-DRS,XAFS,N2O脉冲和O2-TPD)对催化剂进行了表征.结果发现,分子筛骨架外的FeOx在Fe/ZSM-5催化N2O分解中起重要作用;通过研究高温处理的Fe/ZSM-5催化剂中不同FeOx的比例与催化剂活性的关系,得到多核的FeOx是催化N2O分解的主要活性物种;并且,无定形态的FeOx中键长较长的Fe–O键((Fe–O)2)是参与反应的重要物种.     

以一种新型Gemini表面活性剂作为介孔模板剂通过转晶过程合成介孔ZSM-5分子筛

将一种新型Gemini表面活性剂,丙撑基双(十八烷基二甲基氯化铵)[C18H37(CH3)2–N+–(CH2)3–N+–(CH3)2C18H37]Cl2(C18-3-18),作为介孔模板剂用于水热法合成介孔ZSM-5分子筛.结果表明,在130 oC低温晶化即可高效合成介孔ZSM-5分子刷.C18-3-18的加入量可影响到所合成介孔ZSM-5分子筛的相对结晶度和织构性质,它的形成遵从一个转晶过程.在合成初期,凝胶中介孔模板剂C18-3-18的使用导向了介孔材料的生成;随后在TPABr的模板作用下,介孔材料慢慢转晶生成具有MFI结构的介孔ZSM-5;然后所合成的介孔ZSM-5晶粒进一步长大并聚集形成块状颗粒,同时产生晶间介孔.C18-3-18作为介孔导向剂不仅可用于合成介孔ZSM-5分子筛,也可用于其它介孔分子筛的合成中.     

NH3选择性还原NOx技术在重型柴油车尾气净化中的应用

基于实验室对柴油车用V₂O₅-WO₃/TiO₂催化剂配方以及涂覆成型技术的大量研究,设计了一条产量为6000只/月的NH₃选择性催化还原NO_x （NH₃-SCR）催化剂中试生产线,并对生产的催化剂产品进行了发动机台架测试. 结果表明,实验室制备的V₂O₅-WO₃/TiO₂粉体催化剂和生产线产品,在空速为50000 h^-1和200-450 ℃条件下NO_x转化率均可达80%以上;采用大尺寸堇青石载体涂覆后制备的V₂O₅-WO₃/TiO₂整体催化剂经实验室小样测试,在空速为10000-30000 h^-1和250-450 ℃条件下NO_x转化率也为80%以上. 发动机台架测试结果表明,该催化剂产品可使重型柴油机NO_x排放达到国IV标准中欧洲稳态循环（ESC）和欧洲瞬态循环（ETC）排放限值的要求. 该生产线经适当调整后也可用于生产非钒基NH₃-SCR整体催化剂,以满足未来钒基NH₃-SCR催化剂更新换代的需求.     

Nd,Ce和La改性对Ni/SBA-15催化剂在CH4/CO2重整反应中性能的影响

以稀土金属Nd,Ce或La的氧化物为助剂,采用β-环糊精浸渍法对Ni/SBA-15催化剂进行了改性,并运用X射线衍射、N₂吸附-脱附、程序升温还原和热重等手段考察了改性的催化剂在CO₂重整CH₄制合成气反应中的催化性能. 结果表明,Nd等稀土金属氧化物的添加对催化剂孔结构和晶相结构等性质影响不大,但可影响NiO的还原; Nd的添加使NiO与载体之间以Ni-Nd-O形式相互作用,促进了活性组分NiO的还原. 其中,Nd的添加量为5-10 wt%时所制备的催化剂在重整反应中的催化活性最高,且具有很强的抗积碳性能. La和Ce氧化物促进的Ni催化剂也表现出类似的性质和催化性能.     

原位漫反射傅里叶变换红外光谱研究锰铁基催化剂上低温选择性催化还原反应机理简

采用自蔓延燃烧法制备了Ti_0.9Mn_0.05Fe_0.05O_2-δ催化剂,运用原位漫反射傅里叶变换红外光谱对该催化剂的NO和NH₃稳态吸附以及NO和NH₃瞬态反应进行了详细地分析与讨论. 结果表明,相比于Lewis酸性位,150℃时Brönsted酸性位吸附的NH₃更具有SCR活性;与双齿硝酸盐和桥式硝酸盐相比,NO吸附产生的单齿硝酸盐是主要的中间物种;该SCR反应遵循Eley-Rideal和Langmuir-Hinshelwood机理,但以后者为主. 另外,O₂的存在有利于NO的氧化和配位态NH₃的活化.     

Influence of different inorganic salts on crystallization-driven morphological transformation of PCL-b-PEO micelles in aqueous solutions

Different inorganic salts, including NaSCN, NaCl, MgCl2 and Na2SO4, were added into the aqueous solution containing poly(ε-caprolactone)-b-poly(ethylene oxide)(PCL-b-PEO) semicrystalline micelles. The effects of inorganic salt on the micellar size and morphology were investigated with TEM and DLS. It is found that addition of NaSCN leads to increase of the micellar size, but the micelles remain to be spherical. By contrast, the other three inorganic salts can induce sphere-to-cylinder or sphere-to-lamella transformations of the PCL-b-PEO semicrystalline micelles. The alteration rate of the micellar size with the time after addition of the inorganic salts decreases in the following order: Na2SO4 NaCl ≈ MgCl2 NaSCN. These results were interpreted in terms of the "salting-out" ability of the cations and anions. The anions SO42- and Cl- have a stronger "salting-out" ability, driving the morphological transformations of the micelles and leading to a rapid change in micellar size. By contrast, SCN- has a weaker salting-out" ability. The cations Na+ and Mg2+ may associate with the PEO blocks, leading to a "salting-out" effect as well. However, the "salting-out" ability of cations is weaker than that of SO42- and Cl- anions, and the "salting-out" abilities of Na+ and Mg2+ are similar.     

The Relationship of Freeze Tolerance with Intracellular Compounds in Baker’s Yeasts

Freeze-tolerant baker’s yeasts are required for the processing of frozen doughs. The present study was carried out to investigate the cell survival rate after frozen storage and the change of fermentability in dough due to frozen storage, and to discuss quantitatively the relationship of freeze tolerance with intracellular trehalose, amino acids, and glycerol, using six types of baker’s yeasts as the test materials. The experimental results showed that the fermentability of yeast cells in frozen dough was strongly correlated with the cell survival rate. The baker’s yeast with a higher level of cell survival rate had a larger increase in the total intracellular compound content after frozen storage, and the cell survival rate increased linearly with increasing total intracellular compound content in frozen yeast cells. Trehalose was a primary compound affecting freeze tolerance, followed by glutamic acid, arginine, proline, asparagic acid, and glycerol. The basic information provided by the present study is useful for exploring the freeze-tolerance mechanisms of baker’s yeast cells, breeding better freeze-tolerant baker’s yeast strains, and developing more effective cryoprotectants.     

Effects of Saline-Alkaline Stress on Seed Germination and Seedling Growth of Sorghum bicolor (L.) Moench

In order to study the adaptation ability of sweet sorghum (Sorghum bicolor L. Moench) in the Yellow River Delta, the sweet sorghum variety Mart was used in this study to determine the roles of different saline-alkaline ratio stress treatment during seed germination to seedling stage. The results showed that Na⁺ concentration had a significant impact on the seed germination, seedling growth, and plant survival of sweet sorghum. Increasing Na⁺ concentration led to a decline in germination rate, final germination percentage, survival percentage, plant height, and dry weight per plant, a prolonged mean time of germination, as well as loss of improvement effect of low-Na+ concentration. The interaction effect of Na⁺ concentration and pH on the mean time of germination and germination rate was not significant (p?+ concentration (100 mM), high pH reduced the mean time of germination and increased the germination rate, without decline in final germination percentage and survival percentage. Therefore, at least in the duration of seed germination to the harvest period in the research, the sweet sorghum was resistant to the pH stress (≥9.04) when the Na⁺ concentration was below 100 mM. When suffered from the saline-alkaline stress, the seedling of sweet sorghum was characterized by ecological adaptive features, such as decreased stem ratio and chlorophyll b content in leaves and increased root ratio and chlorophyll a content, in order to maintain the uptakes of water and nutrient, and carbon assimilation. When the stress intensified, the lipid oxidation products, e.g., malondialdehyde (MDA), increased in sweet sorghum seedlings. However, the increasing of soluble protein content and antioxidant enzyme activity (superoxide dismutase (SOD), guaiacol peroxidase (POD), and gatalase (CAT)) was only founded in neutral low-Na⁺ concentration treatment (A₁), which indicated that high-salt concentration and pH all elicited harmful effects and limited the self-healing ability of sweet sorghum seedlings. In all, in order to grow sweet sorghum in the saline-alkaline soils of the Yellow River Delta, the salt concentration and pH value of the soil must be taken into consideration, and seeding density should be increased and supported by appropriate irrigation measures to reduce saline-alkaline stress so as to ensure the survival and growth of sweet sorghum seedlings.     

Waste Biogas Residue from Cassava Dregs as Carbon Source to Produce Galactomyces sp. Cczu11-1 Cellulase and its Enzymatic Saccharification

In the conversion of cassava starch dregs to biogas by anaerobic fermentation, the biogas residue (BR) containing lignocellulosic materials still remained in the environment. In order to effectively utilize BR, the complexed 1-methyl-3-methylimidazolium dimethyl phosphate ([Mmim]DMP) media were used for pretreating cellulosic materials. After the optimization of pretreatment, the IL [Mmim]DMP-HCl-water (78.5:1.5:20, w/w/w) pretreament media were used for pretreating BR at 130 °C for 30 min. Furthermore, BR pretreated could be effectively saccharified by cellulase of Galactomyces sp. CCZU11-1. Moreover, BR could be used as a cheap carbon source for the production of Galactomyces sp. CCZU11-1 cellulase. After the culture optimization, the optimal culture conditions were obtained as follows: BR 5 g/L, (NH₄)₂SO₄ 5 g/L, K₂HPO₄ 2 g/L, MgSO₄ 0.2 g/L, NaCl 1 g/L, PEG6000 4 g/L, pH 5.5, and culture temperature 30 °C. After the fermentation for 6 days, the FPA and CMCase were 26.2 and 52.8 U/mL, respectively. In conclusion, waste BR could be chosen as a promising feedstock for biofuels.     

超级电容器石墨烯-聚苯胺复合材料的研究进展

超级电容器具有功率密度高、充放电速度快、循环寿命长和维护成本低的特点,在电动车动力电池领域具有潜在的应用前景。超级电容器性能主要由其电极材料所决定。聚苯胺易合成、理论比容量高,而且导电性能优异,作为超级电容器电极材料有很高的应用价值。但是,在长期使用过程中,它的体积容易发生膨胀或收缩,循环寿命差。为了解决这个问题,将聚苯胺与石墨烯复合可以扬长避短,充分利用两者之间的协同效应,赋予复合材料优异电化学电容性能。本文综述了超级电容器用石墨烯-聚苯胺复合材料的制备方法,包括原位聚合法、油水界面合成法、电化学合成法、层层自组装法等;提出了三维网状石墨烯和对石墨烯-聚苯胺复合材料进行改性来提高复合材料的电化学电容性能的思路。